07-13-2016, 09:47 AM | #1 |
Drives: Ashen gray zl1camaro Join Date: Jun 2016
Location: So Cal
Posts: 145
|
Clicking taping noise
Hey guys I just took my car on a nice spirited canyon drive. I had the windows down and noticed a pretty loud ticking taping noise coming from the drivers side wheel area only when taking hard turns at high speed. It does it while going around a curve to the left and right. Have any of you experienced anything like this. There is no loss in control. The car feels normal and handles the way it always has? Just hoping to hear if anyone has had a similar issue and what the remedy was. I am under full warranty still so I will take in for service soon. I'm putting new tires on tomorrow at my uncle's shop so I will get under the car personally and check the whole front suspension.
|
07-13-2016, 09:59 AM | #2 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
Check your tire for a foreign object.
|
07-13-2016, 10:41 AM | #3 |
Drives: 2010 Camaro SGM 1LT M6 Join Date: Jan 2015
Location: Rochester, NY
Posts: 1,630
|
Mine does this since I put new rims on. the ebrake cable rubs on fast turns. you can ziptie it back
__________________
Arkentect's Build Thread!! - UPSTATE C5 MEMBER
2010 SGM M6 1LT - SOLD Current - 2009 C6 Corvette Z51 |
07-13-2016, 10:42 AM | #4 |
Drives: Ashen gray zl1camaro Join Date: Jun 2016
Location: So Cal
Posts: 145
|
There is nothing in or on my tire. It has done this the last few canyon drives it only makes the noise under heavy fast hard turns. My zl1 has 16000 miles on it.
|
07-13-2016, 10:43 AM | #5 |
Drives: Ashen gray zl1camaro Join Date: Jun 2016
Location: So Cal
Posts: 145
|
I will check the ebrake cable tomorrow while the car is up on the lift.
|
07-13-2016, 10:52 AM | #6 |
Drives: 2010 Camaro SGM 1LT M6 Join Date: Jan 2015
Location: Rochester, NY
Posts: 1,630
|
the ebrake is on passenger side though.
__________________
Arkentect's Build Thread!! - UPSTATE C5 MEMBER
2010 SGM M6 1LT - SOLD Current - 2009 C6 Corvette Z51 |
07-13-2016, 10:57 AM | #7 |
Drives: 2015 ZL1 Blue Velvet Metallic Join Date: Mar 2015
Location: Melbourne, FL
Posts: 720
|
I'm not ZL1 master mechanic, but I don't think there are any e-brake cables going to the front brakes. I'm fairly certain the e-brake only goes to the rears. But, I could be wrong.
__________________
Roto-Fab CAI, ARH LT, SW 3" catback, JRE tune, Elite-2 CC, VMAX TB, Big Gulp, WW II relo, Lingenfelter S/C reservoir
|
07-13-2016, 10:57 AM | #8 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
|
07-13-2016, 11:33 AM | #9 |
Drives: Ashen gray zl1camaro Join Date: Jun 2016
Location: So Cal
Posts: 145
|
I don't remember seeing any cables wires ect. While installing my roto fab intake and my big gulp air scoop. Also the noise was happening before I did the mods. It just seems to be louder now in the last few vigorus driving days.
|
07-13-2016, 12:00 PM | #10 |
Drives: 2015 ZL1 Blue Velvet Metallic Join Date: Mar 2015
Location: Melbourne, FL
Posts: 720
|
After driving Deal's Gap, I swore I hear something in the right front. Stopped twice and didn't see anything. Didn't hear it after I left. That's not to say that during the cornering it wasn't doing something to make some noise, but without proper equipment, I really can't tell. Get a borescope, some microphones and video record it while driving. Maybe you can determine it then. Otherwise, we're all just guessing.
__________________
Roto-Fab CAI, ARH LT, SW 3" catback, JRE tune, Elite-2 CC, VMAX TB, Big Gulp, WW II relo, Lingenfelter S/C reservoir
|
07-13-2016, 12:06 PM | #11 |
Drives: Ashen gray zl1camaro Join Date: Jun 2016
Location: So Cal
Posts: 145
|
I just ordered a wired microphone with a wind sock for my GoPro I will be trying the recording process so I can show the dealer the noise it's making.
|
07-13-2016, 12:32 PM | #12 |
Drives: 2010 Camaro SGM 1LT M6 Join Date: Jan 2015
Location: Rochester, NY
Posts: 1,630
|
He never specified whether it was front or back. Mine has that noise in the back so I just gave a suggestion.
__________________
Arkentect's Build Thread!! - UPSTATE C5 MEMBER
2010 SGM M6 1LT - SOLD Current - 2009 C6 Corvette Z51 |
07-13-2016, 12:36 PM | #13 |
Drives: '12 Camaro ZL1, '16 Silverado Z71 Join Date: Mar 2012
Location: Blaine, MN
Posts: 846
|
Do you have headers? Mine rubbed the passenger side frame rail on corners when under load.
__________________
2012 ZL1: M6, Rotofab CAI, ATI balancer w/8.66 overdrive, PFADT long tube headers w/cats
2016 Silverado LTZ-Z71 Midnight Edition: 6.2L, 8 speed auto, Borla exhaust |
07-13-2016, 12:48 PM | #14 |
Drives: 2015 ZL1 Blue Velvet Metallic Join Date: Mar 2015
Location: Melbourne, FL
Posts: 720
|
You are correct. I should not have assumed that when he said "only when taking curves at high speeds" he was not implying it was caused by the tire that was doing the turning.
__________________
Roto-Fab CAI, ARH LT, SW 3" catback, JRE tune, Elite-2 CC, VMAX TB, Big Gulp, WW II relo, Lingenfelter S/C reservoir
|
|
|
|
|