06-17-2017, 10:23 PM | #1 |
Drives: 2018 ZL1 Join Date: Feb 2016
Location: Scranton pa
Posts: 305
|
Sold
I'm selling my 2016 camaro SS wheels and tires. They're like brand new. They were taken off the car with 1100 miles on them. The have never been raced or burned out with. The rims are in excellent condition! They have been meticulously washed and waxed from new. These come complete ready to bolt on with the TPMS sensors and center caps. Price is sold shipped to your door. Or I can do local pickups or meet you within a reasonable distance. Thanks for looking.
__________________
Last edited by 02fbody35th; 07-08-2017 at 03:11 PM. |
06-17-2017, 11:10 PM | #2 |
Drives: 2012 Camaro LS Black Join Date: Jun 2017
Location: Aurora, IL
Posts: 96
|
I'll offer $850.. I know it's cheap but if you want to accept later on. But they look amazing. Good luck!
|
06-23-2017, 09:16 PM | #3 |
Drives: 2018 ZL1 Join Date: Feb 2016
Location: Scranton pa
Posts: 305
|
Updated photos. Make an offer!
__________________
|
06-25-2017, 12:14 AM | #4 |
Drives: 2011 SGM 1SS A6 & 2014 SW 2SS/RS M6 Join Date: Jul 2014
Location: Lighthouse Point, Fl
Posts: 490
|
Are the wheels a staggered set.
__________________
|
06-25-2017, 07:10 AM | #5 |
Drives: 2018 ZL1 Join Date: Feb 2016
Location: Scranton pa
Posts: 305
|
The front is a 20x 8.5 with a 245/40r20 tire and the rear is a 20x9.5 with 275/35r20 tire
__________________
|
06-26-2017, 09:50 AM | #6 |
IG: Vector_Blue
|
In case anyone was wondering how they look on a 5th gen, here's a picture of mine. Note that you will need at least a 1/4" spacer to clear 5th gen Brembo calipers. They DO fit without the spacer, but it's really really close, and will sometimes rub on turns. Also 6th gen TPMS won't work with 5th gen cars.
GLWS. I paid $1,200 for mine, factory new take offs. Price is fair.
__________________
RIP Crystal Red Tintcoat 2013 Camaro ZL1, 11/22/17.
|
06-26-2017, 01:34 PM | #7 |
Drives: 2010 CGM 1LT Camaro Join Date: Nov 2008
Location: Ft Worth TX
Posts: 103
|
So these should fit an 5th gen RS with no problems/spacers needed? Since they don't have the Brembos.
|
06-26-2017, 01:45 PM | #8 |
Drives: 2018 ZL1 Join Date: Feb 2016
Location: Scranton pa
Posts: 305
|
That's correct. According to my research they fit the non brembo cars fine. And they do actually fit the SS with the brembo's as well but there a little too close for comfort, so a small spacer is recommended.
__________________
|
06-29-2017, 08:53 AM | #9 |
Drives: 2018 ZL1 Join Date: Feb 2016
Location: Scranton pa
Posts: 305
|
Need to move these. $1100 shipped!!!
__________________
|
06-29-2017, 02:05 PM | #10 |
Drives: 2012 Camaro 2SS/RS M6 Join Date: Feb 2016
Location: Saugerties, NY
Posts: 125
|
I used off the shelf 3mm BMW spacers on my 2012 SS same wheels just black. Spacers this thin do not need to be hub centric. Price is really good especially including shipping.
|
06-29-2017, 02:07 PM | #11 | |
Drives: 2012 Camaro 2SS/RS M6 Join Date: Feb 2016
Location: Saugerties, NY
Posts: 125
|
Quote:
|
|
06-29-2017, 03:59 PM | #12 |
Drives: 2014 Camaro SS Join Date: Feb 2014
Location: Sarasota, FL
Posts: 32
|
I have a 5th gen SS with a set of 6th gen split spoke wheel and they clear the brembos.. I can only fit a dollar bill in between but they DO clear. If you have painted/powder-coated brembos they WONT fit.
|
06-29-2017, 04:20 PM | #13 |
Drives: 2012 Camaro 2SS/RS M6 Join Date: Feb 2016
Location: Saugerties, NY
Posts: 125
|
Have you removed your wheels since you installed them? I have unpainted brembos and the wheels do not rub when the car is jacked up and you hand spin the wheel, but when driving and braking they do touch. I have a wear line across every spoke on the back of the wheel.
|
07-05-2017, 10:59 AM | #14 |
Drives: 2018 ZL1 Join Date: Feb 2016
Location: Scranton pa
Posts: 305
|
Still Available!
__________________
|
|
|
|
|