You are browsing camaro5 
 |
|
07-20-2023, 04:41 PM
|
#1 |
   
|
Hello, I need rear zl1 bumper/diffuser small parts and hardware
Hello, I'm looking for the Zl1 small brackets and hardware for the Zl1 diffuser. The hardware is not so important. And I need the driver side metal heat shield that goes around the exhaust tips. I'm looking at the rear bumper parts for a upgrade to my 2010 ss. I attached a diagram below showing what parts I'm looking for. Looking to do a secure transaction for both parties. Thanks, Dan
__________________
2012 zl1 stock 7000 miles
2010 TVS2300, BTR cam PD stage 3, ID1050 injectors, CHE bronze trunnions, 7.400" pushrods,.660" lift platinum springs, Titanium ret, Zl1 fuel pump, Kooks LT headers, High flow cats, Roto Fab CAI, Corsa exh., Mellings oil pump, HD chain, ls2 damper, all synthetic, BMR control arms, zl1 toe link, BMR cradle mounts, W/bottle relocation, air scoop deflector, Hennessy wheels, two piece rotor, morimoto fogs, DRL harness, coilovers, Heads up install, mgw shifter, slps splitter, slp spoiler, zl1 side skirts, painted strips, debadged, tinted, 2018 emblems. Edit Signature Last edited by lionssfan; 07-26-2023 at 02:43 PM. Reason: more detailed |
|
|
|
07-23-2023, 08:16 PM
|
#2 |
       
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
Looking for the same but GM has discontinued the majority of everything.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|
07-23-2023, 09:44 PM
|
#3 |
|
|
I'm going to fabricate my brackets. I was able to get all the main parts. but yes parts appear to be getting scarce. The toughest part it seems right now is getting the dual exhaust tips on my Corsa Exhaust sys. I might do a youtube video on the install
__________________
2012 zl1 stock 7000 miles
2010 TVS2300, BTR cam PD stage 3, ID1050 injectors, CHE bronze trunnions, 7.400" pushrods,.660" lift platinum springs, Titanium ret, Zl1 fuel pump, Kooks LT headers, High flow cats, Roto Fab CAI, Corsa exh., Mellings oil pump, HD chain, ls2 damper, all synthetic, BMR control arms, zl1 toe link, BMR cradle mounts, W/bottle relocation, air scoop deflector, Hennessy wheels, two piece rotor, morimoto fogs, DRL harness, coilovers, Heads up install, mgw shifter, slps splitter, slp spoiler, zl1 side skirts, painted strips, debadged, tinted, 2018 emblems. Edit Signature |
|
|
|
|
07-24-2023, 01:02 PM
|
#4 |
|
|
most important part I need right now is the driver side heat shield for the diffuser. anyone have one? thanks Still could use related hardware. brackets for diffuser
__________________
2012 zl1 stock 7000 miles
2010 TVS2300, BTR cam PD stage 3, ID1050 injectors, CHE bronze trunnions, 7.400" pushrods,.660" lift platinum springs, Titanium ret, Zl1 fuel pump, Kooks LT headers, High flow cats, Roto Fab CAI, Corsa exh., Mellings oil pump, HD chain, ls2 damper, all synthetic, BMR control arms, zl1 toe link, BMR cradle mounts, W/bottle relocation, air scoop deflector, Hennessy wheels, two piece rotor, morimoto fogs, DRL harness, coilovers, Heads up install, mgw shifter, slps splitter, slp spoiler, zl1 side skirts, painted strips, debadged, tinted, 2018 emblems. Edit Signature |
|
|
|
|
|
|
|
 |
|
|
