New Jersey 2010 Season Opener Meet - see inside for details! - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ls7camaro · 02-23-2010, 02:44 PM

I wish I could come. That's the weekend before i get back from Hennessey with my camaro.

9SevenSS · 02-23-2010, 03:16 PM

Cool, I'll be there!

MrGazinya · 02-23-2010, 03:20 PM

I'm in, I can swing either day.. Can't wait for the meets to start again, It has been a long boring winter

SirBrad · 02-23-2010, 03:51 PM

Wow, so far 16 in for Saturday and 11 in for Sunday.

Looking like we could have a good turnout either way. Hopefully it's not snowing!

AccuWeather is calling for a foot of snow where I am on Thursday.

molsonbrador · 02-23-2010, 06:22 PM

Quote:

Originally Posted by SirBrad

Wow, so far 16 in for Saturday and 11 in for Sunday.

Looking like we could have a good turnout either way. Hopefully it's not snowing!

AccuWeather is calling for a foot of snow where I am on Thursday.

Worst winter yet, family blames it on me and the new Camaro.

SNV · 02-24-2010, 01:19 AM

Quote:

Originally Posted by SirBrad

AccuWeather is calling for a foot of snow where I am on Thursday.

Damn I didn't even know about snow till you said something lol. I have a side job to do on Thursday. Snow will really screw me up :(.

BoomerandBoozer · 02-24-2010, 06:39 AM

I voted for Sunday, Little League will be back in full swing in April, if have to do on a Saturday, the later the better, never know what time the games are, but they usually start early and are never played on Sunday.

Does East Coast do any simple stripes installation, would be great to attend and get some things done on the car?

Sstac · 02-24-2010, 09:00 AM

Sundays will prob be the better day for me all summer/spring... i work saturdays during that time of year.

East Coast Supercharging · 02-24-2010, 09:24 AM

Quote:

Originally Posted by BoomerandBoozer

Does East Coast do any simple stripes installation, would be great to attend and get some things done on the car?

We have not done any stripe installs here. We work closely with a custom paint shop that would do that for us. we pretty much do anything but paint and body here.

Also let me know if anyone has interest in getting on the dyno that day..

BoomerandBoozer · 02-24-2010, 01:44 PM

Quote:

Originally Posted by East Coast Supercharging

We have not done any stripe installs here. We work closely with a custom paint shop that would do that for us. we pretty much do anything but paint and body here.

Also let me know if anyone has interest in getting on the dyno that day..

Thanks, you should have your custom paint guys come then, I would like to talk about ideas and discuss differences between vynl and painted stripes

East Coast Supercharging · 02-24-2010, 01:48 PM

Quote:

Originally Posted by BoomerandBoozer

Thanks, you should have your custom paint guys come then, I would like to talk about ideas and discuss differences between vynl and painted stripes

I just fowarded them over this thread...

SirBrad · 02-24-2010, 02:40 PM

I have a question for anyone attending this meetup...for all of you guys that have blacked out your bowtie, how did you do it and would you be willing to help me do mine at the meetup? Let me know what materials I might need to get...

Darqueling · 02-24-2010, 03:13 PM

Quote:

Originally Posted by SirBrad

I have a question for anyone attending this meetup...for all of you guys that have blacked out your bowtie, how did you do it and would you be willing to help me do mine at the meetup? Let me know what materials I might need to get...

While I have not done it yet, this is what I figure you could do, as some background I do a lot of hobby painting so I do have plenty of background in some of what I am saying. You can pull it right off, then primer it black using plastics friendly primer and then I would use my model paints that I have. I paint with Vallejo paints for miniatures and models, which have a latex base so I find they are smoother. Of course others may recommend different things, but in theory when and if I do this that is what I would do. I can bring my brushes and paints if you want me to give it a shot. I may try to purchase an extra one to try this out on.

SirBrad · 02-24-2010, 07:16 PM

Quote:

Originally Posted by Darqueling

While I have not done it yet, this is what I figure you could do, as some background I do a lot of hobby painting so I do have plenty of background in some of what I am saying. You can pull it right off, then primer it black using plastics friendly primer and then I would use my model paints that I have. I paint with Vallejo paints for miniatures and models, which have a latex base so I find they are smoother. Of course others may recommend different things, but in theory when and if I do this that is what I would do. I can bring my brushes and paints if you want me to give it a shot. I may try to purchase an extra one to try this out on.

Maybe we can try it out.

I'm on the fence about the billet bowties. I certainly don't have $134 to throw down on these, but they look sharp. And I can always try to get someone to buy me them for my birthday.

http://www.camaro5.com/forums/showth...+BLACK+BOWTIES

View Poll Results: What day/s can you make it out?
Saturday, April 10	21	35.59%
Sunday, April 11	14	23.73%
Both days are good	21	35.59%
Both days are bad	3	5.08%
Voters: 59. You may not vote on this poll

02-23-2010, 03:16 PM	#16
9SevenSS Drives: 2010 CAMARO 2SS/RS M6 RJT!!! Join Date: Feb 2009 Location: King of Prussia, PA Posts: 81 View My Garage	Cool, I'll be there! __________________ Traded in my 9SevenSS for a 2010 SS!!!!!!

02-23-2010, 03:20 PM	#17
MrGazinya Drives: Aggressive Join Date: Jul 2008 Location: Southampton, PA. Posts: 1,086	I'm in, I can swing either day.. Can't wait for the meets to start again, It has been a long boring winter __________________ Black 2SS RS LS3 Inferno Int. '17 1LE replica 20's {MODS} KOOKS LT: Borla S-Type: Roto-Fab CAI: Hurst ST.: PFADT Stage 2, Trailing arms, Tie Rods: ECS BigBlower Cam: Fast 102mm intake: Brian Tooley racing dual spring kit: TFS pushrod set: Katech C5R timing chain: Mellings high volume oil pump: ATI Balancer: Ideal performance upgraded clutch master cylinder:Tick performance upgraded slave cylinder/throwout bearing: Mantic 9000 twin disk clutch & light weight flywheel: Tuned by Doug Ring at ECS. 475RWHP/445RWTQ.Dynapack Dyno.

02-24-2010, 09:00 AM	#22
Sstac Drives: 2010 2SS/RS Camaro Join Date: Jul 2009 Location: NJ Posts: 313	Sundays will prob be the better day for me all summer/spring... i work saturdays during that time of year. __________________ Current: 2010 Camaro CGM 2SS RS Manual Past: '99 camaro, '01 Z28, '03 vette '08 BMW 535i 1100, Preliminary order accepted 08-06-09 2000, Accepted By GM 09-1-09 3000, Order accepted by production control 09-1-09 TPW 09-21-09 3300, Order scheduled for production 09/11/09 3400, Order broadcast 09-12-09 3800, Order produced 09-22-09 4000, Available to ship 09-23-09 4200, Shipped 09-24-09 5000, Delivered to the dealer 10/12/09 * Picked up 10/12/09

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CAMARO WIKI	Tran	Wiki	66	04-22-2024 11:41 AM
OFFICIAL 2010 Camaro Specifications (full tech specs PDF inside)	Tran	Guides, Manuals, Bulletins, Documentation Archive	394	06-11-2010 06:16 PM
Edmunds Inside Line Review - Road Tests 2010 Chevrolet Camaro SS ONLINE!	Supermans	5th Gen Camaro SS LS LT General Discussions	77	03-23-2009 09:15 AM
Edmunds Inside Line - Road Tests 2010 Chevrolet Camaro SS coming at 6pm	roadtripper	5th Gen Camaro SS LS LT General Discussions	137	03-20-2009 05:31 PM
Ordering 2010 Camaros in Northern New Jersey	DkknightX	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	17	12-31-2008 12:07 AM

02-23-2010, 02:44 PM	#15
ls7camaro Drives: 2010 camaro Join Date: May 2009 Location: PA Posts: 395	I wish I could come. That's the weekend before i get back from Hennessey with my camaro.

02-23-2010, 03:51 PM	#18
SirBrad The Captain Drives: 2010 2LT/RS SIM Join Date: May 2009 Location: Freehold, NJ Posts: 1,499	Wow, so far 16 in for Saturday and 11 in for Sunday. Looking like we could have a good turnout either way. Hopefully it's not snowing! AccuWeather is calling for a foot of snow where I am on Thursday.

02-24-2010, 06:39 AM	#21
BoomerandBoozer Drives: G35, had '87 & '93 Z28 Join Date: Oct 2008 Location: Jersey - Exit 8 Posts: 149	I voted for Sunday, Little League will be back in full swing in April, if have to do on a Saturday, the later the better, never know what time the games are, but they usually start early and are never played on Sunday. Does East Coast do any simple stripes installation, would be great to attend and get some things done on the car?

02-24-2010, 02:40 PM	#26
SirBrad The Captain Drives: 2010 2LT/RS SIM Join Date: May 2009 Location: Freehold, NJ Posts: 1,499	I have a question for anyone attending this meetup...for all of you guys that have blacked out your bowtie, how did you do it and would you be willing to help me do mine at the meetup? Let me know what materials I might need to get...