New! 2010 Camaro Stealth Splash Guards / Mud Flaps - Keep your fenders clean! - Page 21 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Gary24 · 01-29-2014, 08:07 AM

I just saw the ones you have for the 2014. I will order these today. Great price.

Gary24 · 02-10-2014, 04:32 PM

Just got them today. They look great. I'll be installing this weekend.

Gary24 · 02-23-2014, 04:43 PM

I just installed the RPI splash guards. The front ones were very easy to install. Turn the wheel and a screw driver fits in nicely. The rear ones were a beast to install with the tires on the car. I bought a screw driver with a 90% bend in order to get these on. The spacers need to be trimmed to fit. I didn't trim them at first then had to remove the screws again (very slow). Now they are on and they look great. Just like the pic on the RPI website.

skipinminn · 02-23-2014, 07:46 PM

I have had them on all 3 of my Camaro's. Nice looking easy to put on. I have the color matched ones.

IH8OPEC · 02-23-2014, 08:04 PM

I ordered and installed these too and the fronts are ok but... I'm not impressed with the rear to be quite honest.

The so called spacers are a joke and then there's the bracket with the double sided tape that's a complete PITA to position with the wheel on the car. Long story short I threw the rears in the trash and went to my local dealer and ordered the ZL1 rear splash shields for $30 per side.

I'm still trying to figure out why I can order just the fronts for $29.95 but if I add the ZL1 rears at RPI the price jumps to $109.95. You mean to tell me that I get a better price buying one set than RPI does buying multiple sets?

Gary24 · 02-24-2014, 04:10 PM

The spacers worked fine for me. I drove the car this past weekend with all the sand on the road and these splash guards did their job. Good job RPI. I tried ordering ZL1 splash guards from my local dealer but they had no idea what to look up. The Chevy dealer wanted to sell me some yellow ones for $200. Idiots.

IH8OPEC · 02-24-2014, 07:34 PM

Quote:

Originally Posted by Gary24

The spacers worked fine for me. I drove the car this past weekend with all the sand on the road and these splash guards did their job. Good job RPI. I tried ordering ZL1 splash guards from my local dealer but they had no idea what to look up. The Chevy dealer wanted to sell me some yellow ones for $200. Idiots.

ZL1 rear splash guard 22895336 and 22895337

RPI Designs · 03-14-2014, 11:23 AM

Quote:

Originally Posted by Gary24

The spacers worked fine for me. I drove the car this past weekend with all the sand on the road and these splash guards did their job. Good job RPI. I tried ordering ZL1 splash guards from my local dealer but they had no idea what to look up. The Chevy dealer wanted to sell me some yellow ones for $200. Idiots.

Thank you sir!

mjluper · 05-04-2014, 10:07 PM

Fronts went on fine. Backs are a bit weird. Is the tape on the angle brackets supposed to be on the inside or the outside of the brackets. Mine are on the inside and there is no way I see it working with the tape on the inside.

RPI Designs · 05-13-2014, 09:48 PM

Quote:

Originally Posted by mjluper

Fronts went on fine. Backs are a bit weird. Is the tape on the angle brackets supposed to be on the inside or the outside of the brackets. Mine are on the inside and there is no way I see it working with the tape on the inside.

They work great, we've sold nearly 1,000 sets. If you don't like them, just return them, it's no problem.

mjluper · 05-13-2014, 09:57 PM

I was just curious about what side of the angle brackets the double stick tape is supposed to go on for the rears. As stated mine are on the inside of the angle and I'm pretty sure that's not how they are supposed to go. I love the looks of them A lot and I want to keep them I just want to know if I'm totally missing something or if you guys put the tape on the wrong side. It's no problem if you did. I'll buy some double stick tape and put it on the outside of the bracket if that's how they are supposed to work. Don't think I'm bashing on the product I'm just trying to get an answer.

RPI Designs · 05-29-2014, 06:15 AM

Quote:

Originally Posted by mjluper

I was just curious about what side of the angle brackets the double stick tape is supposed to go on for the rears. As stated mine are on the inside of the angle and I'm pretty sure that's not how they are supposed to go. I love the looks of them A lot and I want to keep them I just want to know if I'm totally missing something or if you guys put the tape on the wrong side. It's no problem if you did. I'll buy some double stick tape and put it on the outside of the bracket if that's how they are supposed to work. Don't think I'm bashing on the product I'm just trying to get an answer.

Just give us a call and we'll help you out. Easier to talk than type.

BigBlue2010 · 06-14-2014, 03:50 PM

Can someone post installation instructions here or point me where they are? No instruction came with my package today, and I am confused looking at all the pieces. Thank you.

RPI Designs · 06-16-2014, 07:52 AM

Quote:

Originally Posted by BigBlue2010

Can someone post installation instructions here or point me where they are? No instruction came with my package today, and I am confused looking at all the pieces. Thank you.

Please give us a call, we'll help you with any questions you have.

02-23-2014, 04:43 PM	#283
Gary24 Drives: 2014 Camaro 1SS 1LE Join Date: Dec 2013 Location: Woodbridge, Va Posts: 246	I just installed the RPI splash guards. The front ones were very easy to install. Turn the wheel and a screw driver fits in nicely. The rear ones were a beast to install with the tires on the car. I bought a screw driver with a 90% bend in order to get these on. The spacers need to be trimmed to fit. I didn't trim them at first then had to remove the screws again (very slow). Now they are on and they look great. Just like the pic on the RPI website. Last edited by Gary24; 02-24-2014 at 04:18 PM.

02-23-2014, 08:04 PM	#285
IH8OPEC ΜΟΛΩΝ ΛΑΒΕ Drives: 2010 VR/W 2SS/RS L99 Join Date: Dec 2012 Location: Ellijay, GA Posts: 509	I ordered and installed these too and the fronts are ok but... I'm not impressed with the rear to be quite honest. The so called spacers are a joke and then there's the bracket with the double sided tape that's a complete PITA to position with the wheel on the car. Long story short I threw the rears in the trash and went to my local dealer and ordered the ZL1 rear splash shields for $30 per side. I'm still trying to figure out why I can order just the fronts for $29.95 but if I add the ZL1 rears at RPI the price jumps to $109.95. You mean to tell me that I get a better price buying one set than RPI does buying multiple sets? __________________ Last edited by IH8OPEC; 02-23-2014 at 08:17 PM.

05-13-2014, 09:57 PM	#291
mjluper Drives: 2011 Camaro 2SS RS M6 Join Date: Jan 2013 Location: Idaho Posts: 5	I was just curious about what side of the angle brackets the double stick tape is supposed to go on for the rears. As stated mine are on the inside of the angle and I'm pretty sure that's not how they are supposed to go. I love the looks of them A lot and I want to keep them I just want to know if I'm totally missing something or if you guys put the tape on the wrong side. It's no problem if you did. I'll buy some double stick tape and put it on the outside of the bracket if that's how they are supposed to work. Don't think I'm bashing on the product I'm just trying to get an answer. Last edited by mjluper; 05-13-2014 at 10:12 PM.

06-14-2014, 03:50 PM	#293
BigBlue2010 Drives: 2010 Camaro 2SS/RS IBM A6 Join Date: Jan 2012 Location: NOVA Posts: 260	Can someone post installation instructions here or point me where they are? No instruction came with my package today, and I am confused looking at all the pieces. Thank you. __________________ BTR N/A Stage IV, LS3 conv. w/ trunion, 3200 Circle D, ZL1 wheels(295/305), 3.91's, Kooks Stepped LTs, SW Retro CB, AirRaid CAI, VMAX TB, SLP UDP, 160 thermo, BMR goodies

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camaro Product Manager - interview	Moose	5th Gen Camaro SS LS LT General Discussions	11	04-04-2012 06:10 PM
Gran Turismo 5... No Camaro?	5thGenOwner	5th Gen Camaro SS LS LT General Discussions	111	12-06-2011 10:06 AM
Latest Camaro Products - March 2010	Sean@Phastek	V8 Bolt-Ons & Tunes	26	08-04-2010 04:42 PM
2010 Camaro Exterior Stainless Steel Parts 15% off thru 2/10/10!	RPI Designs	Exterior Parts & Accessories	5	02-28-2010 01:28 PM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM

01-29-2014, 08:07 AM	#281
Gary24 Drives: 2014 Camaro 1SS 1LE Join Date: Dec 2013 Location: Woodbridge, Va Posts: 246	I just saw the ones you have for the 2014. I will order these today. Great price.

02-10-2014, 04:32 PM	#282
Gary24 Drives: 2014 Camaro 1SS 1LE Join Date: Dec 2013 Location: Woodbridge, Va Posts: 246	Just got them today. They look great. I'll be installing this weekend.

02-23-2014, 07:46 PM	#284
skipinminn Chiquita Drives: 2013 1LE/1SS YELLO1LE 1 of Only 28 Join Date: Nov 2011 Location: Mpls. Mn./Hudson,Wi. Posts: 4,740 View My Garage	I have had them on all 3 of my Camaro's. Nice looking easy to put on. I have the color matched ones.

02-24-2014, 04:10 PM	#286
Gary24 Drives: 2014 Camaro 1SS 1LE Join Date: Dec 2013 Location: Woodbridge, Va Posts: 246	The spacers worked fine for me. I drove the car this past weekend with all the sand on the road and these splash guards did their job. Good job RPI. I tried ordering ZL1 splash guards from my local dealer but they had no idea what to look up. The Chevy dealer wanted to sell me some yellow ones for $200. Idiots.

05-04-2014, 10:07 PM	#289
mjluper Drives: 2011 Camaro 2SS RS M6 Join Date: Jan 2013 Location: Idaho Posts: 5	Fronts went on fine. Backs are a bit weird. Is the tape on the angle brackets supposed to be on the inside or the outside of the brackets. Mine are on the inside and there is no way I see it working with the tape on the inside.