Received My JBA CATTED MIDPIPES Today - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Hicompression · 06-15-2010, 06:26 PM

Look pretty good. Made out of 409 stainless steel. Paid $391 shipped. Much cheaper than the Solo midpipes. Stay tuned for ease of installation and fitment evaluation....

Icntdrv55 · 06-15-2010, 07:34 PM

how many cells are they?

Hicompression · 06-15-2010, 09:57 PM

Someone on here claimed they were 400. I can find nothing to back that up. When looking down the cat it looks more like a 200 - 300 cell count converter to me. It's a metallic matrix converter, not ceramic so it won't blow out.

g-townmach · 06-15-2010, 10:43 PM

Subscribed. I want to see how these do on factory tune.

wbt · 06-15-2010, 10:44 PM

Very nice! Should be good for 25RWHP gain.

ArkySS · 06-15-2010, 11:06 PM

Interested here as well. I think these are 2.5" outlet right. Trying to figure out if these will work with my setup.

linkwpc · 06-15-2010, 11:10 PM

where did you buy?

JS · 06-15-2010, 11:51 PM

I was the one that said 400CELL...
This was cofirmed threw JBA which I sell at my shop

They do look real nice though, I might call JBA again just to VERIFY cell count.
Get back to u guys today

Hicompression · 06-16-2010, 07:41 AM

Quote:

Originally Posted by ArkySS

Interested here as well. I think these are 2.5" outlet right. Trying to figure out if these will work with my setup.

Yes, they are 2.5" outlet.

Quote:

Originally Posted by linkwpc

where did you buy?

buyjba.com

Quote:

Originally Posted by JS

I was the one that said 400CELL...
This was cofirmed threw JBA which I sell at my shop

They do look real nice though, I might call JBA again just to VERIFY cell count.
Get back to u guys today

Thanks, let us know...

ArkySS · 06-16-2010, 09:30 AM

hmmm how to get them hooked up to my 3" exhaust.....

2010 4 DW · 06-16-2010, 10:15 AM

Looks nice!

I had a set before I went long tubes, and there was a nice increase in power for sure when I added the JBA Mids.

DW

2010 4 DW · 06-16-2010, 10:17 AM

Quote:

Originally Posted by ArkySS

hmmm how to get them hooked up to my 3" exhaust.....

If you have shorties and factory mids they will work fine with your Flowmaster 3" exhaust.

ArkySS · 06-16-2010, 10:44 AM

Yes but does this not replace the factory mids? Wanting to go with the high flow cats.

2010 4 DW · 06-16-2010, 11:13 AM

Quote:

Originally Posted by ArkySS

Yes but does this not replace the factory mids? Wanting to go with the high flow cats.

They replace the factory mids.

06-15-2010, 06:26 PM	#1
Hicompression Rumbly Bumble Bee Drives: 2010 2SS Camaro Join Date: Aug 2009 Location: DFW Posts: 1,469	Received My JBA CATTED MIDPIPES Today Look pretty good. Made out of 409 stainless steel. Paid $391 shipped. Much cheaper than the Solo midpipes. Stay tuned for ease of installation and fitment evaluation.... Attached Images __________________ 2010 RALLY YELLOW 2SS 6M -OBX Longtubes FTW!

06-15-2010, 07:34 PM	#2
Icntdrv55 CCOTR Member Drives: Victory Red 2010 2SS/RS A6 Join Date: Jun 2009 Location: Parker CO Posts: 1,096	how many cells are they? __________________ Camaro Club Of The Rockies (CCOTR) Check us out on Facebook! --------------------------- 2010 Camaro SS/RS Victory Red A6- Vararam Intake, Doug Thorley Tri Y LTs, Magnaflow X-pipe, Flowmaster Super 40's, VMS Tune, Razzi Ground Effects, Herritage Grill, RED headlight and fog light Halos, LED DRLs, Dash and extended Door ABL, engine, grill and rear defusser LED lighting ........ 12.59@112.21 (DA Corrected)

06-15-2010, 09:57 PM	#3
Hicompression Rumbly Bumble Bee Drives: 2010 2SS Camaro Join Date: Aug 2009 Location: DFW Posts: 1,469	Someone on here claimed they were 400. I can find nothing to back that up. When looking down the cat it looks more like a 200 - 300 cell count converter to me. It's a metallic matrix converter, not ceramic so it won't blow out. __________________ 2010 RALLY YELLOW 2SS 6M -OBX Longtubes FTW!

06-15-2010, 10:43 PM	#4
g-townmach I FARTED Drives: 2010 2SS/RS Join Date: Nov 2009 Location: cen-tex Posts: 870	Subscribed. I want to see how these do on factory tune. __________________

06-15-2010, 11:06 PM	#6
ArkySS Camaroless for now... Drives: 2014 Blue Topaz Silverado Join Date: Sep 2009 Location: Arkansas Posts: 1,411	Interested here as well. I think these are 2.5" outlet right. Trying to figure out if these will work with my setup. __________________ It was fun while it lasted.....

06-15-2010, 10:44 PM	#5
wbt Account Suspended Drives: 2010 Challenger R/T;2011 Mustang GT Join Date: Jan 2010 Location: Texas Posts: 2,105	Very nice! Should be good for 25RWHP gain.

06-15-2010, 11:10 PM	#7
linkwpc The punching cat Drives: '10 Camaro SS Black W/Hugger&W/IOI Join Date: Nov 2007 Location: Torrance, CA Posts: 4,048 View My Garage	where did you buy? __________________ My car build (COTW 7/23/12) - - - - - - > CLICK HERE! : http://www.camaro5.com/forums/showthread.php?t=80725

06-15-2010, 11:51 PM	#8
JS Drives: 2010 Camaro SS Join Date: May 2010 Location: Phila,Pa. Posts: 557	I was the one that said 400CELL... This was cofirmed threw JBA which I sell at my shop They do look real nice though, I might call JBA again just to VERIFY cell count. Get back to u guys today __________________ SOLD 2010 Camaro 1SS/A6 12.59@111.31 Magnaflow Magnapack Axleback & Resonated X-Pipe/OBX LT Headers/Airaid Cold Air Kit/Injection Connection Tuned

06-16-2010, 09:30 AM	#10
ArkySS Camaroless for now... Drives: 2014 Blue Topaz Silverado Join Date: Sep 2009 Location: Arkansas Posts: 1,411	hmmm how to get them hooked up to my 3" exhaust..... __________________ It was fun while it lasted.....

06-16-2010, 10:15 AM	#11
2010 4 DW Account Suspended Drives: White 2010 RS/SS Join Date: Dec 2009 Location: San Diego Posts: 672	Looks nice! I had a set before I went long tubes, and there was a nice increase in power for sure when I added the JBA Mids. DW

06-16-2010, 10:44 AM	#13
ArkySS Camaroless for now... Drives: 2014 Blue Topaz Silverado Join Date: Sep 2009 Location: Arkansas Posts: 1,411	Yes but does this not replace the factory mids? Wanting to go with the high flow cats. __________________ It was fun while it lasted.....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Received TPW (09/07) from Dealer Today, What does this mean	pglover19	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	1	08-10-2009 05:02 PM
Received Black 2010 SS/RS today, pics inside.	jrmurphy33	Camaro Photos \| Spyshots \| Video \| Media Gallery	14	08-01-2009 09:47 AM
Received A Camaro Today	thearrow	5th Gen Camaro SS LS LT General Discussions	20	06-01-2009 06:49 AM
Camaro Literature Received Today	DkknightX	5th Gen Camaro SS LS LT General Discussions	16	03-17-2009 07:50 PM
Official Camaro brochure now available (scans inside)	Txturbo	Camaro Photos \| Spyshots \| Video \| Media Gallery	65	03-09-2009 11:30 PM