Here is my Dyno with jannetti's header package - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Ltdodge · 07-02-2010, 06:38 PM

well I have a baseline dyno i got in august when it was 92 degrees here in Orlando and i went back tot he same dyno and it was 94 degrees with high humidity and my car was being trouble shooting on the dyno so it was massively heatsoaked from driving and running on the dyno for about 8 pulls until they did the dyno run pull.

i am happy with the results hoped to have gotten over 400 but a gain of 46 hp and 31 torque with massive heat soak and a very hot humid day in orlando is not that bad. i think this dyno is conservative, but at least i got a baseline on the same dyno

my mods are dynatech headers, rotofab cai, axle back and janneti tune on a LS3. I also now have 315 tires on 20x10 wheels, so they are about a couple of pounds heavier.

i wonder if his tune is based on 91 octane or 93 octane? i run 93 here in florida so i wonder if i get a 93 octane tune it should improve....

gearhead440 · 07-04-2010, 03:38 PM

Good results in the summer sun! I lived in Orlando more than 20 years ago while in the Navy and have shared the misery of the heat and humidity...

paul2010 · 07-04-2010, 05:34 PM

Thats pretty good for a cai and headers!!!

mikey8 · 07-04-2010, 07:17 PM

Nice bro!

07-02-2010, 06:38 PM	#1
Ltdodge Drives: 2008 Z06 Join Date: Apr 2009 Location: Oviedo, Florida Posts: 891	Here is my Dyno with jannetti's header package well I have a baseline dyno i got in august when it was 92 degrees here in Orlando and i went back tot he same dyno and it was 94 degrees with high humidity and my car was being trouble shooting on the dyno so it was massively heatsoaked from driving and running on the dyno for about 8 pulls until they did the dyno run pull. i am happy with the results hoped to have gotten over 400 but a gain of 46 hp and 31 torque with massive heat soak and a very hot humid day in orlando is not that bad. i think this dyno is conservative, but at least i got a baseline on the same dyno my mods are dynatech headers, rotofab cai, axle back and janneti tune on a LS3. I also now have 315 tires on 20x10 wheels, so they are about a couple of pounds heavier. i wonder if his tune is based on 91 octane or 93 octane? i run 93 here in florida so i wonder if i get a 93 octane tune it should improve.... Attached Images __________________

07-04-2010, 05:34 PM	#3
paul2010 Drives: 2012 ZL1 #1278 Join Date: Aug 2009 Location: Indiana Posts: 1,213 View My Garage	Thats pretty good for a cai and headers!!! __________________ 2012 ZL1 #1278 2010 2nd Place Fastest 4 5th Gen LSX Shootout 2011 2nd Place Fastest 4 5th Gen LSX Shootout

07-04-2010, 07:17 PM	#4
mikey8 Drives: 2019 SS 1LE Join Date: Dec 2009 Location: Winter Garden, FL Posts: 549	Nice bro! __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	08-30-2021 05:56 PM
Roto-fab CAI dyno results	Roto-fab 1	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	102	07-30-2016 07:21 PM
LMR's Street Stalker Package Dyno Vid!	Late Model Racecraft	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	0	04-14-2010 01:16 PM
LMR's Slayer Package Dyno Vid!!	Late Model Racecraft	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	0	04-14-2010 01:14 PM

07-04-2010, 03:38 PM	#2
gearhead440 Drives: Yellow 2SS, 6 speed manual Join Date: Jan 2010 Location: Concord, NC Posts: 218	Good results in the summer sun! I lived in Orlando more than 20 years ago while in the Navy and have shared the misery of the heat and humidity...