09-16-2016, 12:22 PM | #1 |
Drives: 2014 2SS something or other Join Date: Aug 2016
Location: DC
Posts: 36
|
Gears job in MD/DC/VA area
Hi guys, I'm looking for a reputable shop that will install the 3.91 gears for me in my 2014 2SS. I called around to a couple dealerships, one wouldn't/couldn't even give me a quote, and the other quoted me at $1950 for labor only. Since I'm not looking to spend close to $2,500 on this and not willing to risk messing it up myself I'm looking for other options.
If anyone in the area has had this done, or knows a shop that's done a few of them, and done them well, I'd greatly appreciate the heads up. Thanks! |
09-16-2016, 12:28 PM | #2 |
Drives: 2013 1LE Join Date: Mar 2013
Location: maryland
Posts: 796
|
I know RPM in deleware was doing specials on 391 gear sets. Well known reputable shop. They did the cam install and tune on my old car. CTSV1
__________________
|
09-16-2016, 12:32 PM | #3 |
Drives: 2013 White L99 SS Join Date: Dec 2013
Location: Great Falls, VA
Posts: 225
|
I'm thinking about going to Broadview auto in Warrenton. They were pretty reasonable
Sent from my iPhone using Tapatalk
__________________
Current HP/Torque: 413HP/413 Torque
Current mods: Pfadt Tri-y Headers with Hi-Flow Cats, VMAX CNC Ported Throttle body, CAI intake by Cold Air Inductions, Apex Air Scoop/Washer relocation set, RX Catch Can, Stainless Works 3" retro Chambered cat back exhaust, Flex Fuel sensor, 3.91 gear ratio, BMR rear trailing arms, BMR Rear Toe rods Future Mods: GPI's SS3 VVT cam, 3600 stall triple disc torque converter, Fast LSX 102mm throttle body |
09-16-2016, 12:46 PM | #4 |
Drives: 2013 1LE Join Date: Mar 2013
Location: maryland
Posts: 796
|
The times ive been down there, Broadview and John have seen on the up and up. Just never had work done by them.
You could also ask Rick Kim of RKT performance near Frederick. He is more of a trans specialist.
__________________
|
09-16-2016, 12:47 PM | #5 |
Drives: 2014 2SS something or other Join Date: Aug 2016
Location: DC
Posts: 36
|
Thanks guys. I sent RPM an email. Broadview's labor rate is nearly $100 less than the Chevy dealership's, so that sounds like a great deal.
|
09-16-2016, 01:17 PM | #6 |
Drives: 2014 2SS something or other Join Date: Aug 2016
Location: DC
Posts: 36
|
What do you guys know about T&T performance in Frederick? I stumbled across them on Google and their site would lead one to believe they specialize in Camaros. That's exactly what I'm looking for, if that's true.
|
09-16-2016, 07:13 PM | #7 |
|
JE Import Performance in Baltimore, MD
__________________
Instagram @orange_maro_
|
09-19-2016, 08:23 PM | #8 |
Drives: 2010 Silverado. Stock height now Join Date: Oct 2014
Location: Springfield Va
Posts: 307
|
AA speed in Woodbridge va.
703-497-7333. Ask for Dan He's the only guy who does rear work for me. |
09-30-2016, 06:14 PM | #9 |
Drives: 2010 Camaro SS/RS Join Date: Mar 2014
Location: somewhere in MD
Posts: 4,883
|
Could try Daisy Import Auto in Woodbine, MD. They're Camaro friendly
__________________
2010 2SS/RS
Z/28 intake, NW, FAST 102, speed engineering LT's, some exhaust, ATI -10% pulley, GM flex fuel injectors, DSX flex fuel sensor, MGW shifter, HP Tuners, some suspension work, stickers and a little weight loss. 12.63 @113.53 |
|
|