03-24-2012, 09:03 AM | #1 |
Drives: 2012 45th anniversary, 1969 c-10, Join Date: Dec 2010
Location: louisville ky
Posts: 103
|
racedeck flooring
Anyone ever put down Racedeck flooring or an equivalent, How easy, and is it durable.
|
03-24-2012, 09:33 AM | #2 |
Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009
Location: El Paso
Posts: 2,973
|
Very easy to put down, just snaps together. So far mine has been great, no worries and cleans easily.
__________________
Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive,
MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood! |
03-24-2012, 10:20 AM | #3 |
I'm not totally useless..
|
The only thing that was a pita for me when doing mine was it came in 4x4 sections consisting of 4 pieces. I had to separate them out to do what I wanted and that was a bit tedious and tricky.
It is a great product though and cleans up easily. It will discolor a bit over time if you don't keep after cleaning it and your car is a daily driver.
__________________
"You were really flyin' when I passed you back there!" - Born on 10/05/09 MyCamaroBuildInfo
|
03-25-2012, 08:48 AM | #4 |
Drives: 2012 45th anniversary, 1969 c-10, Join Date: Dec 2010
Location: louisville ky
Posts: 103
|
okay thanks
|
03-25-2012, 12:07 PM | #5 | |
Drives: 2010 Cyber Grey Metallic 2SS/RS M6 Join Date: Nov 2009
Location: Tega Cay, South Carolina
Posts: 4,032
|
Quote:
|
|
03-25-2012, 05:10 PM | #6 |
I'm not totally useless..
|
Thanks! I debated over the traditional black/white like the checkered flag but knew that white was gonna be an even bigger PITA to keep looking nice, so I went this way...
__________________
"You were really flyin' when I passed you back there!" - Born on 10/05/09 MyCamaroBuildInfo
|
03-25-2012, 08:30 PM | #7 |
Drives: 2010 Camaro 2LT VR/RS CGM Rally's Join Date: May 2009
Location: Palmyra, PA
Posts: 5,675
|
how much if you dont mind me asking
__________________
Email: rdurso1@yahoo.com |
03-26-2012, 08:44 AM | #8 |
I'm not totally useless..
|
Keep in mind this was at least 5 years ago I did this so the prices were lower. But I shopped and haggled with a few vendors and got my 20x20 garage Racedeck materials (main tiles plus tapered edges for the entrances) for 1000.00 shipped.
Just googled it real quick and found a place selling the Diamond pattern I have for 3.49sq ft so not too much higher....
__________________
"You were really flyin' when I passed you back there!" - Born on 10/05/09 MyCamaroBuildInfo
|
03-26-2012, 07:13 PM | #9 |
Drives: 2007 Corvette C6 983 RWHP Join Date: Dec 2011
Location: Montreal, Canada
Posts: 690
|
Racedeck is great stuff!
__________________
2007 C6 vert, auto, F55, LT3
LME LS402 , WCCH 245 Heads, Pat G. Custom cam YSI / 3.0 pulley, ARH 1 7/8 headers, NPP Dewitts / dual spals, A&A dual pump fuel system. 3.42 polished gears, hardened shafts, Alky control meth, Cartech line lock, ECS axle loops, Trans brace, 6L80 built by me. ID 1000 injectors, comp rockers, Morel lifters, BT springs, Trend 3/8 pushrods, ATI 10% OD Damper Circle D Triple Disc stall 1009 RWHP @ 7000, 817 RWTQ @ 6000, |
03-29-2012, 02:42 AM | #10 |
Sold car...
Drives: 2010 Rally Yellow 2SS/RS #37115 Join Date: Oct 2009
Location: Manalapan, New Jersey
Posts: 2,019
|
Also do not use jackstands with sharp bottoms otherwise it will dig into the race deck.
__________________
Build Thread
ECS Novi 1500 Supercharged, LS3 conversion, Small blower cam, Alky Meth injection, 3:45 rear, BMR Suspension parts, 1LE Sways, Billy Boat ZL1 dual mode exhaust. |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
I'm looking for suggustions on garage flooring. | Larz29 | Garage / Tools Discussions | 23 | 05-15-2012 02:13 PM |
Successful DIY Epoxy Flooring ?? | AtotheJ | Garage / Tools Discussions | 27 | 04-02-2012 06:45 PM |
Hardwood flooring Deal! | JasonK | Off-topic Discussions | 1 | 10-18-2011 11:12 PM |
Toughest garage flooring? | BlownSS | 5th Gen Camaro SS LS LT General Discussions | 20 | 02-10-2011 10:10 PM |