c6 z06 rims 40mm offset - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JZM2ss · 04-23-2011, 07:33 AM

I know the 40mm z06 will fit the back of 5gen camaro ss but will they fit the front.

BossCitySS · 05-05-2011, 09:19 AM

I was wondering the exact same thing???

Neriah · 05-13-2011, 02:53 PM

I thought they were differant lug patterns?

JZM2ss · 05-14-2011, 08:18 AM

They will bolt up on the back with no problem. It is the front you have to worry about because the offset if I'm not mistaking.

Neriah · 05-14-2011, 09:25 AM

gotcha

flht99b · 05-14-2011, 09:31 AM

The factory rear 20x9 wheel is a +40mm offset and it fits perfectly with the OEM Pirelli P Zero 275/40/20 tire on the front. A 285/35/20 or 285/40/20 tire won't fit, it will rub on the strut housing. Since the ZO6 wheel is 18" or 19" diameter you will have to see if it clears the steering knuckle where the 2 bolts retaining the front strut are and if it clears be sure you don't go wider then a 275 tire or the tire may rub the strut housing. In any event it will be close.
Ed M.

SS>GT · 06-01-2011, 03:27 PM

Quote:

Originally Posted by JZM2ss

I know the 40mm z06 will fit the back of 5gen camaro ss but will they fit the front.

what you talking about willis?

I tried fitting the C6 Z06 rims on mine but they didnt fit in the rear. the tires were rubbing the inner well way before they were completely on the rotor...
Bolt pattern is the same though.

jasycz28 · 06-03-2011, 10:01 AM

No they don't fit on the front look here

http://www.camaro5.com/forums/showthread.php?t=133236

jasycz28 · 06-03-2011, 10:02 AM

Quote:

Originally Posted by SS>GT

what you talking about willis?

I tried fitting the C6 Z06 rims on mine but they didnt fit in the rear. the tires were rubbing the inner well way before they were completely on the rotor...
Bolt pattern is the same though.

I have them on the rear of my car with ET streets 305/45/18's.

SS>GT · 08-01-2011, 03:14 PM

Quote:

Originally Posted by jasycz28

I have them on the rear of my car with ET streets 305/45/18's.

You fit C6 Z06 rims on the rear of your camaro?? Can you please PM me on how this was done? im very interested.

SUX2BU · 08-01-2011, 04:36 PM

Quote:

Originally Posted by SS>GT

You fit C6 Z06 rims on the rear of your camaro?? Can you please PM me on how this was done? im very interested.

He is more that likely using the front Z06 wheels on the back of his Camaro. The stream roller Z06 rear wheels won't fit on our cars.

jasycz28 · 08-02-2011, 12:40 AM

Quote:

Originally Posted by SUX2BU

He is more that likely using the front Z06 wheels on the back of his Camaro. The stream roller Z06 rear wheels won't fit on our cars.

Yes.

ref10603 · 08-03-2011, 01:09 AM

if they have wheels widening, would they have wheel thinning? i want the brand new Z06 carbon package wheels! (black zr1 wheels)

04-23-2011, 07:33 AM	#1
JZM2ss Drives: 2ss camaro Join Date: May 2010 Location: NC Posts: 118	c6 z06 rims 40mm offset I know the 40mm z06 will fit the back of 5gen camaro ss but will they fit the front.

05-14-2011, 09:31 AM	#6
flht99b Drives: 2010 Camaro 2SS/RS RJT Join Date: May 2009 Location: Knoxville Posts: 1,574 View My Garage	The factory rear 20x9 wheel is a +40mm offset and it fits perfectly with the OEM Pirelli P Zero 275/40/20 tire on the front. A 285/35/20 or 285/40/20 tire won't fit, it will rub on the strut housing. Since the ZO6 wheel is 18" or 19" diameter you will have to see if it clears the steering knuckle where the 2 bolts retaining the front strut are and if it clears be sure you don't go wider then a 275 tire or the tire may rub the strut housing. In any event it will be close. Ed M. __________________ RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers, rotors & pads, BMR Trailing & Toe Arms, rear cradle & diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 whls, 275/40/20 & 315/35/20 tires, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console & Grant steering wheel.

06-03-2011, 10:01 AM	#8
jasycz28 J.Sick Drives: 2010 Camaro SS Join Date: Nov 2010 Location: Ardmore, OK Posts: 958	No they don't fit on the front look here http://www.camaro5.com/forums/showthread.php?t=133236 __________________ "J.Sick" 2010 Camaro 2SS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
do rims that fit on c6 corvette, fit the camaro?	ls7camaro	Wheels and Tires Talk Sponsored by The Tire Rack	4	04-22-2010 06:42 AM
C6 Z06 flyby... freakin-a	CamaroSpike23	General Automotive + Other Cars Discussion	20	05-05-2008 11:58 AM
2007 Chevrolet Corvette Z06 Ron Fellows Championship Edition	KILLER74Z28	General Automotive + Other Cars Discussion	14	04-10-2007 09:29 AM

05-05-2011, 09:19 AM	#2
BossCitySS Drives: 2010 Camaro SS L99 Join Date: Apr 2010 Location: Bossier City, La Posts: 303 View My Garage	I was wondering the exact same thing???

05-13-2011, 02:53 PM	#3
Neriah Drives: 2011 2SS/RS Join Date: May 2011 Location: Brentwood, CA Posts: 860	I thought they were differant lug patterns?

05-14-2011, 08:18 AM	#4
JZM2ss Drives: 2ss camaro Join Date: May 2010 Location: NC Posts: 118	They will bolt up on the back with no problem. It is the front you have to worry about because the offset if I'm not mistaking.

05-14-2011, 09:25 AM	#5
Neriah Drives: 2011 2SS/RS Join Date: May 2011 Location: Brentwood, CA Posts: 860	gotcha

08-03-2011, 01:09 AM	#13
ref10603 Drives: 2011 Camaro 2SS Join Date: Jun 2011 Location: houston Posts: 24	if they have wheels widening, would they have wheel thinning? i want the brand new Z06 carbon package wheels! (black zr1 wheels)