03-13-2014, 09:59 PM | #1 |
Drives: 2018 ZL1 2015 1SS 1LE Join Date: May 2013
Location: North Eastern Michigan
Posts: 772
|
Bolts for Strut Tower Brace
Anyone know what size the six bolts are that come with the GM strut tower brace. Picked one up and it did not come with any. Would check the car, but it's in storage.
Thanks in advance for any help.
__________________
2018 ZL1 2015 1SS 1LE Stock...ish |
03-13-2014, 10:25 PM | #2 |
Drives: 2012 Triple Black ZL1 M6 Join Date: Jun 2010
Location: San Antonio, TX
Posts: 584
|
I had the same problem, I ended up going to the dealer and ordering them. They are a few dollars each =/
__________________
CenterForce DYAD Dual Disc Clutch, JDP stage 2 Clutch Reservoir, Rotofab CF CAI with Big Gulp and WW Reservoir Relocate, Stainess Works LT Headers and Retro Cat-Back with Cat Delete, MGW ST Shifter with custom Knob, CF Tail light Bezels, more to come...
Build Thread for my Z is in the works..... |
03-13-2014, 10:37 PM | #3 |
Drives: '14 1LE Join Date: Nov 2013
Location: NJ
Posts: 2,435
|
M8 - 1.25 x 35mm should work (try Lowes or HD)
|
03-14-2014, 06:30 AM | #4 |
Drives: 2018 ZL1 2015 1SS 1LE Join Date: May 2013
Location: North Eastern Michigan
Posts: 772
|
__________________
2018 ZL1 2015 1SS 1LE Stock...ish |
03-16-2014, 04:48 PM | #5 |
Drives: 2012 SS Camaro LS3 Join Date: Jun 2012
Location: New Jersey
Posts: 330
|
yup m8 x 1.25 x 35mm...you can also use the allen key socket head cap screws to dress it up a bit..
|
|
|
|
|