12-09-2009, 08:38 PM | #1 |
el Ruco
Drives: 2010 Camaro SS (now runnin' TENS ) Join Date: Nov 2009
Location: Fontana, CA
Posts: 7,388
|
Which 18" wheels and tires for dragging?
Can anybody tell me which tires, sizes too, and wheels, will provide the maximum grab, and least cost for dragging on 18" rims? I need new 18" wheels too, which are cost effective, and how wide? Using up drag specific tires at the track, instead of the daily super expensive 20"s, is an important alternative for this working class hero.
|
12-09-2009, 08:51 PM | #2 |
Drives: Corvette ZO6 CSR edition #47 Join Date: Apr 2009
Location: Calhoun, GA
Posts: 767
|
Good luck I have asked this question for 4 months. Even tirerack.com couldnt get it right. Beware of the Z06 wheels they require a spacer. Other than that Im along for the ride also.
__________________
Nationwide Turf
"artificial turf factory" |
12-09-2009, 09:03 PM | #3 |
Drives: Not enough room here! Join Date: Jul 2009
Location: Plainfield, IL
Posts: 1,017
|
About half way down the page at : http://www.camaro5.com/forums/showth...04#post1227404
__________________
BEWARE OF THE LPE BROTHERHOOD!
Remember: You can sleep in your car, but you can't drive your house! |
12-09-2009, 09:06 PM | #4 |
Drives: '10 Camaro SS Join Date: Apr 2009
Location: Gilbert, Arizona
Posts: 1,047
|
Allot of people have been going this route.
18" C5 Z06 wheels require the 3/16 spacer for the WIDTH spacing. http://www.corvetteguys.com/c5z06-ch...el-18x105.html g-Force T/A Drag Radial 295/35R18 http://www.tirerack.com/tires/Sizes....FA+Drag+Radial OR: Nitto NT 555R Drag Radial 305/35-18 http://www.discounttire.com/dtcs/tir...85234&pc=40231
__________________
2010, SIM, 2SS/RS, LS3, CGM Stripes
|
12-09-2009, 09:25 PM | #5 |
SST...
Drives: SST Camaro 2010 Join Date: Oct 2008
Location: East Coast of Florida
Posts: 5,927
|
One cost effective alternative - check out a set of Beyern wheels. There are many distributors in the US. Beyern makes wheels for BMW. Since they deal in large volumes and they are the correct metric fit for the Camaro, you can get almost any diameter, style and backspace in the $160 - $300 range.
|
12-09-2009, 11:09 PM | #6 |
Account Suspended
|
My plan is to buy a set of 4 C6 Z06 18X9.5's off Ebay and split them with a friend.
|
|
|
|
|