Any LFX guys change their exhaust yet? - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

45anni-gen5 · 05-28-2012, 09:37 AM

i went with the SLP Loudmouth axle back. Everone seems to complain about droning but its not bad if you have a 6 spd so you can keep the rpm's down

but when u want it loud its awsome IMO it sounds like a ferrari LOL...and for 404.00 shipped from Marylandspeedshop.com it was a no brainer.

45anni-gen5 · 05-28-2012, 09:39 AM

Quote:

Originally Posted by PalmerGA

I'm sure the question has been asked before but as a new Camaro owner I'm curious:

When I install the CAI and MRT-V2, will it void any parts of my warranty?

No it should not void warranty. They would have to prove that your install caused the problem and in most cases the on board computer on the car was designed to make changes for minor mods such as that. You are safe by doing those mods my friend

!!

Roll_the_Dice · 05-28-2012, 10:31 AM

Quote:

Originally Posted by 45anni-gen5

i went with the SLP Loudmouth axle back. Everone seems to complain about droning but its not bad if you have a 6 spd so you can keep the rpm's down

but when u want it loud its awsome IMO it sounds like a ferrari LOL...and for 404.00 shipped from Marylandspeedshop.com it was a no brainer.

Any sound clips? I used to have a Ferrari with Tubi exhaust...so I would love to hear it.

PalmerGA · 05-28-2012, 01:59 PM

Quote:

Originally Posted by 45anni-gen5

No it should not void warranty. They would have to prove that your install caused the problem and in most cases the on board computer on the car was designed to make changes for minor mods such as that. You are safe by doing those mods my friend

!!

And mod I shall. Thanks for the info and a special thanks for your service, SSgt.

PalmerGA · 05-28-2012, 02:02 PM

Quote:

Originally Posted by toyboy1980

I would highly recommend getting it welded on instead of messing with clamps, etc.

Do you recommend welding because of some noted leakage with the clamps, or just as a precaution against possible leakage?

toyboy1980 · 05-28-2012, 02:44 PM

Quote:

Originally Posted by PalmerGA

Do you recommend welding because of some noted leakage with the clamps, or just as a precaution against possible leakage?

Yes, and yes, and just because I don't trust clamps to stay put, and not move around.

PalmerGA · 05-28-2012, 03:23 PM

Quote:

Originally Posted by toyboy1980

Yes, and yes, and just because I don't trust clamps to stay put, and not move around.

I hear ya. It just seems to me (assuming the new MRT pipe slides over or into the existing pipe

) one could wrap a little "muffler tape" type stuff around the joint and them clamp it with something like this...

I would think that would not leak.

kcm117 · 05-28-2012, 03:23 PM

Hey Guys,

I was looking at the MRT V2's, they sound really nice. But I have an honest newb question, my new Camaro is the first car I've had worth modifying.

I noticed on the Juiced website they have MRT 2.0 , and MRT 2.0 (for V6's with GFX).

What exactly is GFX?

I have the 2012 V6 2LS.

Can't wait to pull the trigger and buy a MRT V2 in a few weeks hopefully.

PalmerGA · 05-28-2012, 03:26 PM

Quote:

Originally Posted by kcm117

Hey Guys,

I was looking at the MRT V2's, they sound really nice. But I have an honest newb question, my new Camaro is the first car I've had worth modifying.

I noticed on the Juiced website they have MRT 2.0 , and MRT 2.0 (for V6's with GFX).

What exactly is GFX?

I have the 2012 V6 2LS.

Can't wait to pull the trigger and buy a MRT V2 in a few weeks hopefully.

Ooo - ooo I know this one. GFX is the Ground Effects option, which has different sized/shaped exhaust tip ports, requiring a different tip on the pipes.

I had to ask too, about a week ago. If your Camaro doesn't have the Ground Effexts option, just get the regular V2.

kcm117 · 05-28-2012, 03:44 PM

Quote:

Originally Posted by PalmerGA

Ooo - ooo I know this one. GFX is the Ground Effects option, which has different sized/shaped exhaust tip ports, requiring a different tip on the pipes.

I had to ask too, about a week ago. If your Camaro doesn't have the Ground Effexts option, just get the regular V2.

Thanks a ton man. I didn't purchase a Ground Effects option for my 2LS so that leaves me with regular. You da man!

45anni-gen5 · 05-28-2012, 06:54 PM

Quote:

Originally Posted by Roll_the_Dice

Any sound clips? I used to have a Ferrari with Tubi exhaust...so I would love to hear it.

not yet but as soon as i get them up ill be sure to let you know...!!

45anni-gen5 · 05-28-2012, 06:56 PM

Quote:

Originally Posted by PalmerGA

And mod I shall. Thanks for the info and a special thanks for your service, SSgt.

no problem ...thanks for your support!

Roll_the_Dice · 05-28-2012, 07:00 PM

Quote:

Originally Posted by 45anni-gen5

not yet but as soon as i get them up ill be sure to let you know...!!

Thanks, can't wait to hear them!

12camlt · 05-29-2012, 09:06 PM

I upgraded my stock several weeks ago to a GMPP exhuast from a 2010 SS. I had it welded on and it's just axle back but the sound change is major. If I get off my butt I'll have to post a video.

05-28-2012, 09:37 AM	#43
45anni-gen5 Chevy 4 Life Drives: 2012 45th anniversary RS Vert Join Date: Apr 2012 Location: cheyenne WY Posts: 127	i went with the SLP Loudmouth axle back. Everone seems to complain about droning but its not bad if you have a 6 spd so you can keep the rpm's down but when u want it loud its awsome IMO it sounds like a ferrari LOL...and for 404.00 shipped from Marylandspeedshop.com it was a no brainer. __________________

05-28-2012, 03:23 PM	#50
kcm117 Drives: White 2012 2LS Join Date: May 2012 Location: Boca Raton, FL Posts: 13 View My Garage	What is GFX? Hey Guys, I was looking at the MRT V2's, they sound really nice. But I have an honest newb question, my new Camaro is the first car I've had worth modifying. I noticed on the Juiced website they have MRT 2.0 , and MRT 2.0 (for V6's with GFX). What exactly is GFX? I have the 2012 V6 2LS. Can't wait to pull the trigger and buy a MRT V2 in a few weeks hopefully. __________________ KcM117

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Back pressure and the camaro...	SS>GT	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	80	12-03-2012 03:39 PM
Do we need a new Category "Camaro V6 LFX Engine, Exhaust, and Bolt-Ons"	Solocus	Camaro V6 LFX Engine, Exhaust, and Bolt-Ons	15	09-10-2011 06:56 PM
Will a cam change the exhaust note?	marticus24	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	7	02-20-2011 05:35 PM
MAGNAFLOW Cat-Back / Axle-Back Exhaust Systems \| FREE Shipping	Apex Paul	V8 Bolt-Ons & Tunes	134	01-24-2011 12:56 AM

05-29-2012, 09:06 PM	#56
12camlt Drives: 2016 2SS Join Date: Mar 2012 Location: Seattle Wa Posts: 101	I upgraded my stock several weeks ago to a GMPP exhuast from a 2010 SS. I had it welded on and it's just axle back but the sound change is major. If I get off my butt I'll have to post a video.