RPI Design SS front Spliter on RS - Page 2

RPI Designs · 02-10-2017, 07:39 AM

It fits!

Part number 16-2018

Link to our thread in the vendor section
http://www.camaro6.com/forums/showthread.php?t=483722

AlphaCamaro7 · 02-10-2017, 08:05 AM

Quote:

Originally Posted by RPI Designs

It fits!

Part number 16-2018

Link to our thread in the vendor section
http://www.camaro6.com/forums/newthr...stthread&f=269

Perfect I'll be getting mines soon. Just wanna know. Is that color painted or unpainted? And what color is it?

Sent from my iPhone using Tapatalk

RPI Designs · 02-10-2017, 09:17 AM

Quote:

Originally Posted by AlphaCamaro7

Perfect I'll be getting mines soon. Just wanna know. Is that color painted or unpainted? And what color is it?

Sent from my iPhone using Tapatalk

That is painted Matte Black.

AlphaCamaro7 · 02-10-2017, 09:19 AM

Quote:

Originally Posted by RPI Designs

That is painted Matte Black.

Is that extra?

Sent from my iPhone using Tapatalk

RPI Designs · 02-10-2017, 09:30 AM

Quote:

Originally Posted by AlphaCamaro7

Is that extra?

Sent from my iPhone using Tapatalk

No. That is the standard color. Primer only is less money and body colors are more.

RSKUSTOMZ · 02-10-2017, 03:14 PM

Quote:

Originally Posted by HyperBlue16

Well i'm wondering. When looking for rims, i came across this:

It has what looks like a SS splitter or something else.
Just wondering if while the front area and the grills(right at the bottom of the lower grill) are different between the SS & RS.
The section under it might be the same? Same under it to allow part interchangeability to lower cost in production.

This is the factory GM SS front splitter in gloss black, we have spoken directly with the owner of this particular Camaro to find out, as we did the same lip on our 6th Gen convertible build recently as well.

PolynesianPowerhouse · 02-10-2017, 04:02 PM

Quote:

Originally Posted by RPI Designs

It fits!

Part number 16-2018

Link to our thread in the vendor section
http://www.camaro6.com/forums/showthread.php?t=483722

Actually looks cool. Basically like the AutoX concept gm did

Mitch16 · 02-10-2017, 04:41 PM

Quote:

Originally Posted by RSKUSTOMZ

This is the factory GM SS front splitter in gloss black, we have spoken directly with the owner of this particular Camaro to find out, as we did the same lip on our 6th Gen convertible build recently as well.

Is the owner of this car on the forums? Would like to message him.

HyperBlue16 · 03-05-2017, 02:48 PM

Quote:

Originally Posted by RSKUSTOMZ

This is the factory GM SS front splitter in gloss black, we have spoken directly with the owner of this particular Camaro to find out, as we did the same lip on our 6th Gen convertible build recently as well.

As part of a deal with my dealer from car lift damage, i got a factory ground effects kit, so i grabbed the SS kit to get the front splitter to see( i have the RS splitter), It does fit in front middle perfect, but does have little variations that create a little wider gaps on both sides at the edge curves and little on the dip of each side, to where the tape can not even get near the fascia.
Just figured i would add what i saw with a factory SS on a RS.

Rsblueblood · 03-05-2017, 10:24 PM

Thanks Hyper, do you have any close up pics?

RobertAvitia · 03-06-2017, 12:12 AM

I order mine more then 3 weeks ago and it still hasn't shipped. Email them 4 days ago to cancel the order and haven't gotn anything back. I'm giving them a call tomorrow

AlphaCamaro7 · 03-06-2017, 12:25 AM

Quote:

Originally Posted by RobertAvitia

I order mine more then 3 weeks ago and it still hasn't shipped. Email them 4 days ago to cancel the order and haven't gotn anything back. I'm giving them a call tomorrow

You don't have to cancel. Mines getting here Tuesday and I ordered 3 weeks ago also. They said they're backed up.

RPI Designs · 03-06-2017, 08:37 AM

Quote:

Originally Posted by RobertAvitia

I order mine more then 3 weeks ago and it still hasn't shipped. Email them 4 days ago to cancel the order and haven't gotn anything back. I'm giving them a call tomorrow

Your order was canceled on the 2nd.

Dustya · 03-06-2017, 09:17 AM

Quote:

Originally Posted by HyperBlue16

As part of a deal with my dealer from car lift damage, i got a factory ground effects kit, so i grabbed the SS kit to get the front splitter to see( i have the RS splitter), It does fit in front middle perfect, but does have little variations that create a little wider gaps on both sides at the edge curves and little on the dip of each side, to where the tape can not even get near the fascia.
Just figured i would add what i saw with a factory SS on a RS.

Yeah I saw one on ebay a guy was selling he had showed close up pictures of his RS where it does not meet up perfectly but you have to actually get super close and if you didnt know about it you would not be able to tell.

If the RPI fits perfect probably the better options little things like that would bother me even if no one else knew or could tell.

02-10-2017, 07:39 AM	#15
RPI Designs Drives: 2016 SS 6 Spd Join Date: Jul 2009 Location: Ohio - www.rpidesigns.com Posts: 3,055	It fits! Part number 16-2018 Link to our thread in the vendor section http://www.camaro6.com/forums/showthread.php?t=483722 Last edited by RPI Designs; 02-10-2017 at 10:02 AM.

03-06-2017, 12:12 AM	#25
RobertAvitia BYND GARAGE Drives: 17' 1LT Turbo Join Date: Feb 2016 Location: CA Posts: 667	I order mine more then 3 weeks ago and it still hasn't shipped. Email them 4 days ago to cancel the order and haven't gotn anything back. I'm giving them a call tomorrow __________________ https://m.youtube.com/#/c/BEYONDGARAGE http://instagram.com/bynd_ltg

03-05-2017, 10:24 PM	#24
Rsblueblood Kywildcats Drives: 2020 2SS shock and steel (shocker) Join Date: Jul 2016 Location: Kentucky Posts: 232	Thanks Hyper, do you have any close up pics?

User Name		Remember Me?
Password