CamaroI build Thread (better late than never I guess) - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CamaroI · 04-10-2013, 07:43 PM

Bummed I didn't start this sooner, but thought better late than never. Attempting to dig up old photos along with placing new ones to get everyone up to date.

Going to inventory build and will post pics soon.

For starters I have a L99 2010 SS IOM Camoro original owner. Miles when purchsed 50.

Still trying to locate early pics. Will get individual pics of mods along the way soon.

Mods to date---

ADM Performance Mods include
ADM CAI
Headers installed by ADM
Magnaflow 3' exhaust installed by ADM
Tune by Andy at ADM
Gearing of 3:45 to 1
Dyno Max Power 362.42 and Max Torque 378.18

Mods done by Scorpion Customz in North Richland Hills Texas (Craig)
Lambo doors
Reverse Hood Kit by Revolution
AAC RBG Halos to headlights
AAC RGB Light strips Underglow
AAC pod lights Red for Footwells
AAC Red strip lights for Engine lighting
AAC RGB strip lighting for Front Grill
AAC Rear LED bowtie Red
AAC strip lighting Fenders
3d Carbon Fender Vents
NOS purge system to purge from Fender Vents
Hex Hood Vents
ACS Hood Vents (this was a difficult install and thanks to Lupe at Overhaulengines to adjust for fit)
Rear Blackout trunk panel
RGB Wheel Lights
R1 Slotted and Drill Rotors
Powder Coated "Red" Calipers from Mike
Monster Power Switches for Consol area by Emblem Pros
Cupholder Switches by Emblem Pro's
AAC LED afterburners
OEM stripes removed from Hood and Trunk

Mods done by Fender Mender Keller Texas (Barry)
Painting and installation of ZL1 side skirts
SLP Front Spoiler
Painting and installation of Concept SLP Diffuser with Chrome openings
T3 Mirros from Blacky painted black and installed (soon to come)
High Wing Spoiler
Paint and installation of Black Heritage Grill. Originally purchased/painted IOM by Gary Customz.

Other Mods
AAC Side Markers
Brushed Shifters
Floor Matts by Llyods
Custom trunk panel by Jarhead
Custom trunk inside panels by Jarhead
AAC front Scanner light
Tinted Windows
Drake Custom Shifter
Ghost Armor to protect Radio Face
SS badging in Interior
Bowtie Badging to Wheels IOM by Big Worm Graphics in Fort Worth

Overhaulengines by Lupe
Aided in adjusting Reverse Hood to fit properly.
Painted IOM XM antenna
Painted Black Tail light Bezels
Aided in Adjusting ACS hood ports to fit properly
Painted and installed ACS lower bumper ports with 3 LED pod lighting
Custom Painted Rear AAC Bowtie

Showstoppers
IMO/Black underhood dress up kit.

Roto Fab
Custom Flame IOM/Black Roto Fab Engine Covers

Trying to locate early pics...

This is photo of what looks like now

04-10-2013, 07:43 PM	#1
CamaroI Drives: 2010 IOM Camaro Join Date: Aug 2012 Location: DFW Posts: 3,112	CamaroI build Thread (better late than never I guess) Bummed I didn't start this sooner, but thought better late than never. Attempting to dig up old photos along with placing new ones to get everyone up to date. Going to inventory build and will post pics soon. For starters I have a L99 2010 SS IOM Camoro original owner. Miles when purchsed 50. Still trying to locate early pics. Will get individual pics of mods along the way soon. Mods to date--- ADM Performance Mods include ADM CAI Headers installed by ADM Magnaflow 3' exhaust installed by ADM Tune by Andy at ADM Gearing of 3:45 to 1 Dyno Max Power 362.42 and Max Torque 378.18 Mods done by Scorpion Customz in North Richland Hills Texas (Craig) Lambo doors Reverse Hood Kit by Revolution AAC RBG Halos to headlights AAC RGB Light strips Underglow AAC pod lights Red for Footwells AAC Red strip lights for Engine lighting AAC RGB strip lighting for Front Grill AAC Rear LED bowtie Red AAC strip lighting Fenders 3d Carbon Fender Vents NOS purge system to purge from Fender Vents Hex Hood Vents ACS Hood Vents (this was a difficult install and thanks to Lupe at Overhaulengines to adjust for fit) Rear Blackout trunk panel RGB Wheel Lights R1 Slotted and Drill Rotors Powder Coated "Red" Calipers from Mike Monster Power Switches for Consol area by Emblem Pros Cupholder Switches by Emblem Pro's AAC LED afterburners OEM stripes removed from Hood and Trunk Mods done by Fender Mender Keller Texas (Barry) Painting and installation of ZL1 side skirts SLP Front Spoiler Painting and installation of Concept SLP Diffuser with Chrome openings T3 Mirros from Blacky painted black and installed (soon to come) High Wing Spoiler Paint and installation of Black Heritage Grill. Originally purchased/painted IOM by Gary Customz. Other Mods AAC Side Markers Brushed Shifters Floor Matts by Llyods Custom trunk panel by Jarhead Custom trunk inside panels by Jarhead AAC front Scanner light Tinted Windows Drake Custom Shifter Ghost Armor to protect Radio Face SS badging in Interior Bowtie Badging to Wheels IOM by Big Worm Graphics in Fort Worth Overhaulengines by Lupe Aided in adjusting Reverse Hood to fit properly. Painted IOM XM antenna Painted Black Tail light Bezels Aided in Adjusting ACS hood ports to fit properly Painted and installed ACS lower bumper ports with 3 LED pod lighting Custom Painted Rear AAC Bowtie Showstoppers IMO/Black underhood dress up kit. Roto Fab Custom Flame IOM/Black Roto Fab Engine Covers Trying to locate early pics... This is photo of what looks like now Last edited by CamaroI; 04-11-2013 at 08:05 AM.