09-02-2011, 09:55 PM | #29 |
Slow Turtle
|
Go steal a ds off of a rental car, and see if it fixes your problem LOL
|
09-02-2011, 09:58 PM | #30 | |
Booooosted.
|
Quote:
I'd totaly get away with it too. But, I need to figure out the cause if there is one. Also, I wonder if it would be cheaper or easier to buy a whole new drive shaft rather than fool with this one. It's gonna cost me about 450.00 all together. Bearing, U Joint, and shop to remove and repress the bearing, then put it all back together. I'd just do it myself if it didn't require a pressed bearing. |
|
09-02-2011, 10:02 PM | #31 |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
Not any more got a DSS one piece.
__________________
|
09-02-2011, 10:03 PM | #32 | |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
Quote:
__________________
|
|
09-02-2011, 10:10 PM | #33 | |
Drives: 2010 camaro Join Date: Aug 2009
Location: port st lucie ,florida
Posts: 4,273
|
Quote:
__________________
|
|
09-02-2011, 10:11 PM | #34 |
Drives: 10 1LT SIM; 91 B4C sleeper Z Join Date: Aug 2009
Location: Ft. Mitchell, Alabama
Posts: 7,199
|
Auto
__________________
Pedders Pace Car Package, Injen CAI, Flowmaster AT, AAC Lighting, ZL1 fascia/skirts, RKSport Ram Air hood, vented fenders, painted stripes (Gary's Customz), Honor and Valor badged (Thank you, John)
|
09-02-2011, 10:16 PM | #35 |
Drives: 2010 camaro Join Date: Aug 2009
Location: port st lucie ,florida
Posts: 4,273
|
sorry , i have to disagree, considering the mods i have seen that people are pushing this stock ds thru ..it has held up rather well , when you compare to the rest of driveline...much other weaker parts...axles/rear-1 wheel spin/rear itself/output shaft of tranny/i have seen less then a handful of oem ds break under some extreme mods...i have seen just as many aftermarket high performance ds fail...difference is the oem ds outnumbers the high perf ds by 2000-1...... this is my opinion ......opinions are like a##holes , we all have one..lol
__________________
|
09-02-2011, 10:18 PM | #36 |
Booooosted.
|
Yup mine is an auto. I'm not really concerned about the two piece or one piece thing. Just might be easier to snatch one out and slap another one in rather than have this bearing done.
|
09-02-2011, 10:24 PM | #37 |
Drives: 2010 camaro Join Date: Aug 2009
Location: port st lucie ,florida
Posts: 4,273
|
i def agree there, and the fact ..there are a bunch of ds out there from people who swapped there,s or ones that went 9in...hell, where is speedster,s send jamie{superchargedss} jenetty prob has 5 oem laying aroiund...if you spend 2 hrs looking you will find someone who is not worried about a buck and give it to you for the cost of shipping..i would of gave you mine...so for 25 shipping , some ofd us it,s not a big deal...no disrespect to others trying to get a couple bucks, but some are a little better off then others..so to help out a fellow member who got square wheels , i think we should start the randy foundation...
__________________
|
09-02-2011, 10:24 PM | #38 |
Drives: 10 1LT SIM; 91 B4C sleeper Z Join Date: Aug 2009
Location: Ft. Mitchell, Alabama
Posts: 7,199
|
A little cheaper, but I can't see an illustration to see if the bearing comes with it.
__________________
Pedders Pace Car Package, Injen CAI, Flowmaster AT, AAC Lighting, ZL1 fascia/skirts, RKSport Ram Air hood, vented fenders, painted stripes (Gary's Customz), Honor and Valor badged (Thank you, John)
|
09-02-2011, 10:34 PM | #39 |
Drives: 2010 camaro Join Date: Aug 2009
Location: port st lucie ,florida
Posts: 4,273
|
theres 1 new one on ebay 229 free shipping...a used one - make offer...i would offer 125 with shipping...but you need to check your part number...i can call tommy hendrix, he may have a old 1 laying around..
__________________
|
09-02-2011, 10:45 PM | #40 |
Just Because!
Drives: 2010 SIM 2SSRS Join Date: Jun 2010
Location: San Jose, Ca
Posts: 6,909
|
Sounds like an excuse to buy a new tool! DIY
http://www.harborfreight.com/12-ton-...ess-33497.html But, does sound like a bad carrier bearing. Could just be the magical PQ "luck" and you got a bad one and its finally done. J
__________________
|
09-02-2011, 11:00 PM | #41 | |||
Booooosted.
|
Quote:
I've given a ton of stock parts to members on here at no charge. Drop springs, stock shifter, door panels, intake manifold, and a number of other things. Heck, I gave GTAHVIT my exhaust and cats. ........ Quote:
Quote:
But I'm not sure it's a simple press like that. The shop even said that they'd have to send it off to be done. To a clutch and drivetrain shop. |
|||
09-02-2011, 11:00 PM | #42 |
Booooosted.
|
How can I be sure it has the carrier bearing in it?
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
TR6060 hydraulic bearing kit Fits 10-up Camaro | Xplosive Performance | Transmission / Driveline | 5 | 05-21-2012 10:59 PM |
FS. Brand New Camaro SS Two Piece Driveshaft with Center Bearing | 55Designs | Transmission / Driveline | 4 | 12-08-2010 06:33 PM |
Ball Bearing | Blkcamaro757 | Forced Induction - V8 | 9 | 07-29-2010 03:08 PM |
2010 Camaro BMR Driveshaft Safety Loop pics!!! | BMR Sales | Dragstrip and Launch Techniques Discussion | 29 | 12-12-2009 11:45 PM |
2010 Camaro BMR Driveshaft Safety Loop Pics!!! | BMR Sales | Wheels and Tires Talk Sponsored by The Tire Rack | 3 | 10-20-2009 11:21 PM |