EVERYBODY POST YOUR DYNO NUMBERS!(sticky request) - Page 20 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

KMPrenger · 08-14-2012, 02:08 PM

Quote:

Originally Posted by rtcat600man

By the way did it ever get settleed on who was going to keep this up to date. I noticed we are a few dyno pulls behind on getting the latest posted.

I believe it was going to me. I've contacted Jay about it, and he got back with me. I believe he was going to contact the mods about it, but I haven't heard anything since.

mydreamcar · 08-18-2012, 08:36 AM

Here is my dyno from yesterday, temp was hot about 89 degress and high humidity. Its on a mustang dyno so I open it up to interpretation as I know these things read much lower and did some reading that all people seem to say you could easily add a % to this to compare.. 254hp seems low but the guy openly told me on a dyno jet you could easily add 15 to 20% to these numbers, at 10% that would put me at 280 hp, at 15% at 292. Car feels faster then it ever did before thanks to Jay's ported IM. prior dyno was at 254 hp, but it was an old dyno,. no info on it my fuel trims were horrible and the car did not feel or drive like it does now. so if its a legit 280-290 then I am happy becuase its a good gain from last year.

MACE_ENG · 09-11-2012, 07:10 AM

Just contacted tran to hand this dyno sticky to kmprenger so let's see what happens. Milk, if you see this please pm me. I been trying to pm you for months but no reply. Thanks.

-------------------------------------
Jay@Velocity Port/MACE USA
Direct Email: Velocityport410@Gmail.com

KMPrenger · 09-11-2012, 11:44 AM

I have also contacted him.

MACE_ENG · 09-11-2012, 12:52 PM

Quote:

Originally Posted by KMPrenger

I have also contacted him.

Thanks keith

-------------------------------------
Jay@Velocity Port/MACE USA
Direct Email: Velocityport410@Gmail.com

simt3k · 09-11-2012, 01:05 PM

Quote:

Originally Posted by V6owner

Ya I had a shop tell me $150 for 3 pulls I just started laughing on the phone lol

Some ****ing ass hat here wanted to charge $1500 for "2" dyno runs and a tune. I ****ing hate living in a country where mechanics think they can charge outrageous prices, every day I wish I was an American....

KMPrenger · 09-12-2012, 07:21 PM

The thread is mine.....now I have two of the sticky threads

rtcat600man · 09-12-2012, 07:32 PM

Quote:

Originally Posted by KMPrenger

The thread is mine.....now I have two of the sticky threads

The right person for the right job. we know you will keep it up to date and accurate.

Thanks for all you do Keith.

KMPrenger · 09-12-2012, 10:06 PM

Quote:

Originally Posted by rtcat600man

The right person for the right job. we know you will keep it up to date and accurate.

Thanks for all you do Keith.

I'll do what I can! I know some of the recent ones are missing...I'll get to them I promise!

KMPrenger · 09-15-2012, 05:06 PM

OK boys and girls...I've gotten the first post updated. I've added mydreamcar's and rtcat600man's dynos to the results.

RickRay, I would add yours, but I believe your mods may be different now (whats in your sig) versus what you had when that dyno was ran.

V6owner, I did no add yours also as it is hard to read and I'm un-aware of what your mods were.

Now lets get some more results here guys...the more the merrier!

Also, it helps a bunch if you post up all the data with your run that was asked for in the original post.

Thanks everyone!

its a syn · 09-15-2012, 05:28 PM

Will post my numbers when I get home.

rtcat600man · 09-15-2012, 05:29 PM

Thank - you for taking care of the updates Keith.

RickRay · 09-15-2012, 06:19 PM

Quote:

Originally Posted by KMPrenger

OK boys and girls...I've gotten the first post updated. I've added mydreamcar's and rtcat600man's dynos to the results.

RickRay, I would add yours, but I believe your mods may be different now (whats in your sig) versus what you had when that dyno was ran.

Thanks everyone!

Post 264 is my last dyno with whats in my sig...

KMPrenger · 09-16-2012, 11:28 AM

Quote:

Originally Posted by RickRay

Post 264 is my last dyno with whats in my sig...

added

08-18-2012, 08:36 AM	#268
mydreamcar My Dream Car Drives: 2011 SIM LS3 1SS Join Date: Jul 2009 Location: staten island Posts: 1,534	Here is my dyno from yesterday, temp was hot about 89 degress and high humidity. Its on a mustang dyno so I open it up to interpretation as I know these things read much lower and did some reading that all people seem to say you could easily add a % to this to compare.. 254hp seems low but the guy openly told me on a dyno jet you could easily add 15 to 20% to these numbers, at 10% that would put me at 280 hp, at 15% at 292. Car feels faster then it ever did before thanks to Jay's ported IM. prior dyno was at 254 hp, but it was an old dyno,. no info on it my fuel trims were horrible and the car did not feel or drive like it does now. so if its a legit 280-290 then I am happy becuase its a good gain from last year. Attached Images __________________ CAI intake/ADM Scoop/Stainless Power Headers/Dynatech cat back exhaust/Vitesse Throttle Control/ Ported Throttle Body/QTP Electric Cutouts/ 3.91 gears and janetty rear posi/ Tuned by Janetty racing

09-11-2012, 11:44 AM	#270
KMPrenger Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009 Location: Jefferson City, Missouri Posts: 13,943	I have also contacted him. __________________ 2016 Camaro 1SS - 8-speed - NPP - Black bowties 2010 Camaro 1LT V6 (Sold. I will miss her!)

09-12-2012, 07:21 PM	#273
KMPrenger Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009 Location: Jefferson City, Missouri Posts: 13,943	The thread is mine.....now I have two of the sticky threads __________________ 2016 Camaro 1SS - 8-speed - NPP - Black bowties 2010 Camaro 1LT V6 (Sold. I will miss her!)

09-15-2012, 05:06 PM	#276
KMPrenger Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009 Location: Jefferson City, Missouri Posts: 13,943	OK boys and girls...I've gotten the first post updated. I've added mydreamcar's and rtcat600man's dynos to the results. RickRay, I would add yours, but I believe your mods may be different now (whats in your sig) versus what you had when that dyno was ran. V6owner, I did no add yours also as it is hard to read and I'm un-aware of what your mods were. Now lets get some more results here guys...the more the merrier! Also, it helps a bunch if you post up all the data with your run that was asked for in the original post. Thanks everyone! __________________ 2016 Camaro 1SS - 8-speed - NPP - Black bowties 2010 Camaro 1LT V6 (Sold. I will miss her!)

09-15-2012, 05:28 PM	#277
its a syn B.O.D. 02/16/10 Drives: 2010 SGM Sp. Edition 2017 RS Conver Join Date: Jun 2010 Location: Albia,Iowa Posts: 3,959 View My Garage	Will post my numbers when I get home. __________________

09-11-2012, 07:10 AM	#269
MACE_ENG Drives: LLT Machine Join Date: Nov 2011 Location: VIC/AUS Posts: 563	Just contacted tran to hand this dyno sticky to kmprenger so let's see what happens. Milk, if you see this please pm me. I been trying to pm you for months but no reply. Thanks. ------------------------------------- Jay@Velocity Port/MACE USA Direct Email: Velocityport410@Gmail.com

09-15-2012, 05:29 PM	#278
rtcat600man having FUN now 13.66@101 Drives: 2010 2LT IOM Join Date: Nov 2009 Location: Clarkston, Michigan Posts: 9,230 View My Garage	Thank - you for taking care of the updates Keith. __________________ MY BUILD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Roto-fab CAI dyno results	Roto-fab 1	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	102	07-30-2016 07:21 PM
Dyno numbers are in after heads,Maggie install	papabearcamaro	Forced Induction - V8	17	05-14-2011 08:36 PM
Some L99 Dyno Numbers	JLBIII	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	1	02-20-2011 01:34 AM
ls3 mustang dyno numbers	8secpumpgas	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	6	06-16-2010 12:38 AM
dyno numbers for my build are in (cam + nitrous)	mark_p	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	5	09-10-2009 10:22 AM