my turbo build. "Project fastest street 5th gen" - Page 15 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

47AJV8 · 02-09-2013, 12:20 PM

Quote:

Originally Posted by stangkilr

If its not it will sure as hell look better!

That thing's only got 700hp apparently! Won't stand a chance!

stangkilr · 02-09-2013, 12:36 PM

That thing is uglier than a home made fence

MANNYS2SS/RS · 02-09-2013, 02:28 PM

Quote:

Originally Posted by stangkilr

That thing is uglier than a home made fence

Agree 100%

TRIPWIRE · 02-09-2013, 05:59 PM

dude you gotta put a start up and rev video it prob sounds insane!

djw32 · 02-10-2013, 11:07 AM

Sweet build!

blake-b · 02-10-2013, 11:49 AM

Justin,

Did any rewiring have to be done to move the PCM and fusebox? It appears you tucked the wiring beneath in the custom box.

I am in KC and would love to see how you did it in person.

stangkilr · 02-11-2013, 10:35 AM

Quote:

Originally Posted by blake-b

Justin,

Did any rewiring have to be done to move the PCM and fusebox? It appears you tucked the wiring beneath in the custom box.

I am in KC and would love to see how you did it in person.

Yes a TON of re-wiring had to be done. Its all located in the fresh air box.

stangkilr · 02-11-2013, 10:44 AM

LC · 02-11-2013, 05:12 PM

rear tires look like balloons

G200 Pilot · 02-11-2013, 05:45 PM

After reading the thread, it's obvious this is not your first "RODEO". Build's coming out beautiful... Re your Welds, did you install the Bmr equipment shown earlier and it looks like you kept your original Brembos?

Btw, I went over to You Tube and checked out your buddies Silverado and yours, however, your runs were at night and unable to see much. Have you tracked your Gen 4? What were your 1/4 numbers et/mph?

stangkilr · 02-12-2013, 07:24 AM

Quote:

Originally Posted by G200 Pilot

After reading the thread, it's obvious this is not your first "RODEO". Build's coming out beautiful... Re your Welds, did you install the Bmr equipment shown earlier and it looks like you kept your original Brembos?

Btw, I went over to You Tube and checked out your buddies Silverado and yours, however, your runs were at night and unable to see much. Have you tracked your Gen 4? What were your 1/4 numbers et/mph?

I am not using the BMR stuff. They didnt get it done in time and I had to get the car on wheels. I am using the RPM arms, factory spindles, c5 Corvette rear brakes. I only ran the 4th gen when it was nitrous. It went a best of 9.4@144mph

G200 Pilot · 02-12-2013, 10:03 AM

Quote:

Originally Posted by stangkilr

I am not using the BMR stuff. They didnt get it done in time and I had to get the car on wheels. I am using the RPM arms, factory spindles, c5 Corvette rear brakes. I only ran the 4th gen when it was nitrous. It went a best of 9.4@144mph

Thanks! We're close... 9.5/149... I have the 16" Bogarts and had to remove my Brembos for V6 brakes! Not happy with that setup...

ToddB · 02-12-2013, 10:10 AM

Very nice car. Looks like a work of art.

v6sonoma · 02-14-2013, 03:57 PM

Amazing job. Car looks pretty sweet.

02-09-2013, 12:36 PM	#198
stangkilr Drives: 2017 Camaro ZL1 Join Date: Jan 2011 Location: Missouri Posts: 621	That thing is uglier than a home made fence __________________ 2017 ZL1 2014 Corvette 2002 Camaro

02-11-2013, 10:44 AM	#204
stangkilr Drives: 2017 Camaro ZL1 Join Date: Jan 2011 Location: Missouri Posts: 621	__________________ 2017 ZL1 2014 Corvette 2002 Camaro

02-11-2013, 05:12 PM	#205
LC ou mai gad Drives: SW 2SS x2 Join Date: Feb 2010 Location: MX Posts: 643	rear tires look like balloons __________________

02-11-2013, 05:45 PM	#206
G200 Pilot G200 Pilot Drives: 2010 Camaro SS/RS purchased 5/2010 Join Date: Dec 2010 Location: Port St Lucie, FL Posts: 597	Congratulations on your build! After reading the thread, it's obvious this is not your first "RODEO". Build's coming out beautiful... Re your Welds, did you install the Bmr equipment shown earlier and it looks like you kept your original Brembos? Btw, I went over to You Tube and checked out your buddies Silverado and yours, however, your runs were at night and unable to see much. Have you tracked your Gen 4? What were your 1/4 numbers et/mph? __________________

02-14-2013, 03:57 PM	#210
v6sonoma Drives: 2010 SS RS Join Date: Jun 2009 Location: Providence, RI Posts: 8,108 View My Garage	Amazing job. Car looks pretty sweet. __________________ Mods: BBK Intake, BBK LT's and High Flow Cats, Corsa Cat-back exhaust, Hurst short throw shifter, SLP skip-shift eliminator. 7/1/09 Placed order for IOM/IO int/ SS/RS 6M 9/26/09 Took delivery!

02-09-2013, 05:59 PM	#200
TRIPWIRE Chillin Like a Villain Drives: 2013 2SS Blue Ray Metallic Dusk Ed. Join Date: Apr 2011 Location: Clarksburg,MD Posts: 551 View My Garage	dude you gotta put a start up and rev video it prob sounds insane!

02-10-2013, 11:07 AM	#201
djw32 Drives: on blocks Join Date: Dec 2009 Location: Earth Posts: 34	Sweet build!

02-10-2013, 11:49 AM	#202
blake-b Drives: 2009 ZR1 Join Date: May 2010 Location: KCMO Posts: 3,205	Justin, Did any rewiring have to be done to move the PCM and fusebox? It appears you tucked the wiring beneath in the custom box. I am in KC and would love to see how you did it in person.

02-12-2013, 10:10 AM	#209
ToddB Drives: 2011 2SS Convertible Supercharged Join Date: Nov 2010 Location: WI Cert Welder Navy NSSN Posts: 1,157	Very nice car. Looks like a work of art.