04-17-2015, 11:17 AM | #1 |
Drives: Black 2012 ZL1 Join Date: Mar 2013
Location: Buffalo Grove
Posts: 433
|
Balancer size
I have a 2.55 upper now. Looking at a custom cam and since the car will be in pieces I figured now is a good time to swap the lower. What's the recommendation for the balancer. Not looking to push it to the edge.
|
04-17-2015, 11:39 AM | #2 |
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,813
|
8.66" or 9.1" lower ring is a nice complement
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
04-17-2015, 12:03 PM | #3 |
Drives: '12 ZL1 #1609 Join Date: Feb 2010
Location: Georgia
Posts: 1,762
|
This might help you make a decision.
__________________
Life is too short to drive cars that suck.
My build Thread |
04-17-2015, 12:11 PM | #4 |
Drives: Chevys at the limit Join Date: Nov 2010
Location: SLC, UT
Posts: 9,621
|
I'd recommend the ATI balancer with the 10% OD pulley along with an ARP balancer bolt.
Feel free to call, PM or email me anytime with questions. Best regards, Tyler 888-308-6007 |
04-17-2015, 01:26 PM | #5 |
Drives: ZL1 Join Date: Oct 2012
Location: Talladega
Posts: 631
|
Which Balancer do most of you prefer between Innovators West & ATI? Have you experienced both?
|
04-17-2015, 01:30 PM | #6 |
Drives: Chevys at the limit Join Date: Nov 2010
Location: SLC, UT
Posts: 9,621
|
|
04-17-2015, 02:00 PM | #7 |
Drives: ZL1 Join Date: Oct 2012
Location: Talladega
Posts: 631
|
|
04-17-2015, 02:14 PM | #8 |
Drives: Chevys at the limit Join Date: Nov 2010
Location: SLC, UT
Posts: 9,621
|
ATI is about 1.5lbs lighter.
Best regards, Tyler 888-308-6007 |
|
|
|
|