07-09-2009, 12:45 PM | #1 |
Drives: 98 Camaro Race Car 3.96 @ 202 MPH Join Date: Mar 2009
Location: Houston, Tx
Posts: 979
|
LMR CAI, Longtube Headers, SLP exhaust sound clip!
Just finished up another 2010 Camaro. This one has our CAI, longtube headers, and SLP loudmouth exhaust system. Car made 390rwhp! Here is the sound clip.
__________________
FIRST C7 Corvette in the 7's & 9's 2019 ZR1 LT5*9.00*@ 157 Current C7 World Record Holder 7.55*@ 184*MPH Quickest and Fastest GEN5 LT Powered Vehicle LMR1200HP Supercharged C7 8.84 @ 160** LMR1200HP Twin Turbo C7 9.35@155mph-2014 2 TIME OUTLAW DRAG RADIAL LSX CHAMPION 2008/2010 9.47 ZR1 Corvette-2009 FIRST 2010 CAMARO in the 9's-2010 713-466-9900 Latemodelracecraft.com |
07-09-2009, 12:54 PM | #2 |
Drives: Summit White 1SS Soon Join Date: Jul 2009
Location: Canada
Posts: 52
|
Catted mids?
|
07-09-2009, 01:28 PM | #3 |
Drives: 2010 CGM 2SS 6spd Join Date: Apr 2009
Location: Houston
Posts: 327
|
Yes, it has cats and it was 102 degrees outside when the run was done. This is the Kooks LT headers with cats, LMR CAI and SLP Loudmouth 1 axleback. The car has just over 500 miles on the odometer.
|
07-09-2009, 02:18 PM | #4 |
|
390??
That must be the L99
__________________
|
07-09-2009, 04:15 PM | #5 |
Drives: 2010 CGM 2SS 6spd Join Date: Apr 2009
Location: Houston
Posts: 327
|
Nope, it's a LS3.
|
07-09-2009, 04:19 PM | #6 |
Drives: Summit White 1SS Soon Join Date: Jul 2009
Location: Canada
Posts: 52
|
Hmmm... I thought the loudmouth 1 was gonna be louder than that with a header system, too loud for what I wanted... but that doesn't actually seem TOO bad
|
07-09-2009, 04:58 PM | #7 |
Drives: '69 SS Convertible Join Date: May 2009
Location: DFW, TX
Posts: 7,111
|
Did it get a tune as well?
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal |
07-09-2009, 05:34 PM | #8 |
Drives: 98 Camaro Race Car 3.96 @ 202 MPH Join Date: Mar 2009
Location: Houston, Tx
Posts: 979
|
Yes, that is with a tune. Our dyno seems to be a little stingy. We have dyno'd over 20 2010 Camaro SS's and the baslines are all between 350-358rwhp STOCK where as other shops around the country have seen 370-380's. A dyno is just a tuning tool, you will see the results at the track/street!
__________________
FIRST C7 Corvette in the 7's & 9's 2019 ZR1 LT5*9.00*@ 157 Current C7 World Record Holder 7.55*@ 184*MPH Quickest and Fastest GEN5 LT Powered Vehicle LMR1200HP Supercharged C7 8.84 @ 160** LMR1200HP Twin Turbo C7 9.35@155mph-2014 2 TIME OUTLAW DRAG RADIAL LSX CHAMPION 2008/2010 9.47 ZR1 Corvette-2009 FIRST 2010 CAMARO in the 9's-2010 713-466-9900 Latemodelracecraft.com |
07-10-2009, 10:06 AM | #9 |
NOICE!!! ™
|
Noice
__________________
|
07-21-2009, 11:29 PM | #10 |
superbad IOM
Drives: 07 Suburban Z71, 2010 IOM Camaro SS Join Date: Jun 2009
Location: Vassar, Michigan
Posts: 82
|
This setup has long tube headers, cats and SLP loudmouth, is the loudmouth just minus the mufflers?
|
07-23-2009, 07:38 PM | #11 |
Love's to Detail
Drives: 2010 SS,97silverado/08crewcab Join Date: Oct 2008
Location: Greenville SC.
Posts: 1,421
|
LMR, How much are the CAI's going for?
|
07-25-2009, 02:00 AM | #12 |
Drives: 98 Camaro Race Car 3.96 @ 202 MPH Join Date: Mar 2009
Location: Houston, Tx
Posts: 979
|
$399.99 for black and $449.99 for the carbon fiber finish. Feel free to give me a call at the shop to place your order. It will ship out the same day if ordered before 4pm.
__________________
FIRST C7 Corvette in the 7's & 9's 2019 ZR1 LT5*9.00*@ 157 Current C7 World Record Holder 7.55*@ 184*MPH Quickest and Fastest GEN5 LT Powered Vehicle LMR1200HP Supercharged C7 8.84 @ 160** LMR1200HP Twin Turbo C7 9.35@155mph-2014 2 TIME OUTLAW DRAG RADIAL LSX CHAMPION 2008/2010 9.47 ZR1 Corvette-2009 FIRST 2010 CAMARO in the 9's-2010 713-466-9900 Latemodelracecraft.com |
07-26-2009, 09:22 AM | #13 |
Love's to Detail
Drives: 2010 SS,97silverado/08crewcab Join Date: Oct 2008
Location: Greenville SC.
Posts: 1,421
|
Thanks!
|
08-04-2009, 01:47 PM | #14 |
ZEUSS
|
I am thinking of running either the LM1 or Borla axle back, but I am afraid that the LM1 might sound raspy with the ARH headers. But this doesn't sound raspy at all. do you have any other vids of it just reving?
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
V8 Camaro Performance Upgrades List | Milk 1027 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 93 | 08-30-2021 05:56 PM |
Heard exhaust of L99 tonight - OMG!!! | Hylton | 5th Gen Camaro SS LS LT General Discussions | 60 | 03-06-2010 05:03 PM |
LS3 goes 11`s Bonestock! | GMRULZ | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 28 | 12-08-2008 09:10 PM |
Aftermarket Headers and Exhaust | destroyer4 | 5th Gen Camaro SS LS LT General Discussions | 8 | 11-30-2008 06:46 PM |
Muscle car exhaust sound | linkwpc | 5th Gen Camaro SS LS LT General Discussions | 19 | 12-09-2007 06:50 AM |