03-18-2014, 11:51 AM | #1 |
2014 Oil Seperator Kit Instructions Needed
When I picked up my new 2014 1LE the oil seperator kit was already installed and instructions thrown out. I would like to have the instructions for documentation purposes. Can someone please scan theirs in or PM me and I can give my email address for emailing?
The below link is for a 2013. Is there a different part number for the 2014? Besides the oil cap, what stock parts have to be removed to add this kit? I did not get the stock parts that the seperator parts replaced so I'd like to know what I am missing. Thanks in advance! http://sandyblogs.com/techlink/?p=1145
__________________
Last edited by domano 68; 03-18-2014 at 12:09 PM. |
|
03-20-2014, 01:05 PM | #2 |
Bump.
__________________
|
|
03-20-2014, 01:07 PM | #3 |
knows 2 facts about ducks
Drives: ...and they're both wrong Join Date: Aug 2009
Location: The HMS Invincible
Posts: 25,072
|
Here's a DIY on installing it - this help?
http://www.camaro5.com/forums/showthread.php?p=6922530 I know it's for a V6, but the parts are all same I believe. |
03-20-2014, 07:36 PM | #4 |
Drives: 2013 2SS/RS/1LE Join Date: Apr 2010
Location: St Louis, MO
Posts: 3,087
|
It's a one sheet and I doubt it has changed from 13 to 14 as there were no motor changes.
See here: http://www.camaro5.com/forums/showthread.php?t=326260 |
03-20-2014, 08:59 PM | #5 |
Thanks guys for posting as I have seen these. I really need for someone to scan the actual instructions. One reason I need to know how the seperator tube dis-attaches from the intake side. The end of the seperator tube that attaches to the can has a quick disconnect, no clue on the other end. Also I would like to have for future install and uninstall in case I forget how. Thanks.
__________________
|
|
03-20-2014, 09:19 PM | #6 |
Drives: '14 1LE Join Date: Nov 2013
Location: NJ
Posts: 2,435
|
It should come out if you just pull on it
|
03-20-2014, 10:15 PM | #7 |
Drives: 2013 2SS/RS/1LE Join Date: Apr 2010
Location: St Louis, MO
Posts: 3,087
|
nm
Last edited by JimE; 03-20-2014 at 10:36 PM. Reason: two threads |
|
|
|
|