09-03-2015, 11:01 AM | #1 |
SparkyDL75
|
Z/28 front fascia on a 2010 SS? Anyone done this?
First off, I am not trying to make a Z/28 clone/ripoff but I like the look of the 2014-2015 front end and have scraped the crap out of my front end. I know the headlights are different and the Z/28 has the huge splitter, but has anyone done this swap?
__________________
2010 CGM 2SS/RS M6 LS3 Black/Gray
Exterior American Racing BLVD Black w/Machined(20x10) Mickey Thompson Street Comps(275/40 & 305/35) Suspension Pedders Pace Car Pkg w/ZL1 Upgrade; Pedders Upper & Lower Control Arm, Steering, & Differential Mount Bushings; Pedders SS Brake Lines; Pedders Dual Bearing Camber Plates; ZL1 Toe Link; Hawk Performance Ceramic brake pads Drivetrain Maggie2300(8psi-3.4pulley); CompCam; 85lb injectors; ZL1 fuel pump; ZR1 MAP; Centerforce DYAD Twin Disc clutch; Stainless Works LT headers; QTP Cutouts; Rotofab intake; RX catch can; Mike Norris tune 643rwhp 598 rwtq |
09-03-2015, 11:16 AM | #2 |
ZYJ
Drives: 2017 1SS Camaro/6 speed Join Date: Sep 2014
Location: Miami, FL
Posts: 1,346
|
I have seen 2014-2015 ZL1's doing the Z28 whole body conversion.
|
09-03-2015, 11:40 AM | #3 |
Drives: cars Join Date: May 2011
Location: Oversneeze
Posts: 4,544
|
It takes a custom harness, headlights, and all the body parts. Possible but pricey.
|
09-03-2015, 12:13 PM | #4 |
Casey Woodside
Drives: a very fun car Join Date: Jun 2010
Location: Tn
Posts: 1,906
|
thought you did not like the 14-15 fronts?
the lingenfilter l/28 they did the front swap and the rear swap
__________________
Instagram @caseywoodside
http://youtu.be/CSc9aPh_X_w |
09-03-2015, 01:16 PM | #5 |
Drives: 2014 1LS Camaro Join Date: May 2014
Location: Cincinnati, Ohio
Posts: 653
|
You can find the SS front bumper preyty easily, but the splitter is nearly impossible to find unless you buy aftermarket or you get lucky like I did and find a wrecked Z28.
__________________
Nobody with a good car needs to be justified. -Flannery O'Connor
|
09-04-2015, 09:57 PM | #6 |
SparkyDL75
|
Hey Pathogen, what headlights are those? I am trying to put a Z/28 front on a 2010 SS. It won't be as easy as your swap on a 14 model.
__________________
2010 CGM 2SS/RS M6 LS3 Black/Gray
Exterior American Racing BLVD Black w/Machined(20x10) Mickey Thompson Street Comps(275/40 & 305/35) Suspension Pedders Pace Car Pkg w/ZL1 Upgrade; Pedders Upper & Lower Control Arm, Steering, & Differential Mount Bushings; Pedders SS Brake Lines; Pedders Dual Bearing Camber Plates; ZL1 Toe Link; Hawk Performance Ceramic brake pads Drivetrain Maggie2300(8psi-3.4pulley); CompCam; 85lb injectors; ZL1 fuel pump; ZR1 MAP; Centerforce DYAD Twin Disc clutch; Stainless Works LT headers; QTP Cutouts; Rotofab intake; RX catch can; Mike Norris tune 643rwhp 598 rwtq |
09-04-2015, 09:59 PM | #7 |
SparkyDL75
|
The Z/28 front has grown on me. Plus I scraped up the lower part of my front at Camaro5Fest. I want something different and really like the Aggressor II but it is a pain in the butt to get installed from what I have read.
__________________
2010 CGM 2SS/RS M6 LS3 Black/Gray
Exterior American Racing BLVD Black w/Machined(20x10) Mickey Thompson Street Comps(275/40 & 305/35) Suspension Pedders Pace Car Pkg w/ZL1 Upgrade; Pedders Upper & Lower Control Arm, Steering, & Differential Mount Bushings; Pedders SS Brake Lines; Pedders Dual Bearing Camber Plates; ZL1 Toe Link; Hawk Performance Ceramic brake pads Drivetrain Maggie2300(8psi-3.4pulley); CompCam; 85lb injectors; ZL1 fuel pump; ZR1 MAP; Centerforce DYAD Twin Disc clutch; Stainless Works LT headers; QTP Cutouts; Rotofab intake; RX catch can; Mike Norris tune 643rwhp 598 rwtq |
09-05-2015, 10:02 AM | #8 |
Drives: 2014 1LS Camaro Join Date: May 2014
Location: Cincinnati, Ohio
Posts: 653
|
The headlights are Eagle Eye projectors.
__________________
Nobody with a good car needs to be justified. -Flannery O'Connor
|
|
|
|
|