Borla S type Catback- In Cab Noise - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

nessa131 · 09-30-2009, 09:51 PM

I have seen the videos of the borla s type cat backs- and love em--- I am almost positive that is what I am going to get

I have not however seen a video with the in cab drone---- does anyone have a video of this? Thanks!

HeavyD · 10-01-2009, 12:23 AM

I have asked numerous times before. There are several complaints, but no videos. I would love to hear what AFM sounds like!

ravensjeff · 10-01-2009, 03:19 PM

To me, this "Drone" is only noticeable during acceleration. I can put my car on auto-pilot at most speeds and it's quite negligible.

ToddSS · 10-01-2009, 03:30 PM

I will have mine on soon and will post up some video's.

SS-screamer · 10-01-2009, 03:33 PM

I can really notice it when it's running on 4 cylinders but I have to give a slight amount of gas to either keep up with traffic or mantain speed going up a slight incline but I'm not straining it enough to jump into 8 cylinder. It sounds like it simply doesnt have the power to to accelerate the car and is straining. Then it kicks up to 8 cylinders and the exhaust note spikes. It is very annoying in traffic.

nessa131 · 10-01-2009, 08:12 PM

Quote:

Originally Posted by SS-screamer

I can really notice it when it's running on 4 cylinders but I have to give a slight amount of gas to either keep up with traffic or mantain speed going up a slight incline but I'm not straining it enough to jump into 8 cylinder. It sounds like it simply doesnt have the power to to accelerate the car and is straining. Then it kicks up to 8 cylinders and the exhaust note spikes. It is very annoying in traffic.

Does this effect the preformance of your car? (the straining part) or is it just annoying? Thanks!

nessa131 · 10-02-2009, 09:15 PM

Anyone take videos yet? Thanks!

WySS · 10-03-2009, 09:21 PM

I just made this video today, its the Borla S-Type.

Here is my super high tech steering wheel mount for the Samsung SL820 Camera. It involves a sock to isolate any sounds from the steering column/wheel and some masking tape to keep the camera in place(both painters tape and regular, the painters is first attached to the camera to protect the finish from the regular tape).

Kscott46 · 10-03-2009, 09:50 PM

You need gas dude!!LOL ..Im amazed! NO DRONE!.. Was considering SLP LM II....Maybe Borla now! Thanks!

WySS · 10-03-2009, 09:57 PM

Quote:

Originally Posted by Kscott46

You need gas dude!!LOL ..Im amazed! NO DRONE!.. Was considering SLP LM II....Maybe Borla now! Thanks!

LOL Chevron is on the way home from the business park i shot the videos in, got gas after the videos. I love the Borla, it sounds better in person than the digi cam video.

Kscott46 · 10-03-2009, 10:05 PM

If you dont mind me asking....Is it a Full Cat? Axel?

WySS · 10-03-2009, 10:14 PM

Quote:

Originally Posted by Kscott46

If you dont mind me asking....Is it a Full Cat? Axel?

Full Cat Back, if you want to see pics and some more videos check out my thread. http://camaro5.com/forums/showthread.php?t=44650

GOINGSOLO2 · 10-03-2009, 10:15 PM

Give us a look too before you make a decision. We were able to make an exhaust with no drone, great quality, improved throttle response, and at a very reasonable price.

http://www.camaro5.com/forums/showthread.php?t=42318

Tanner · 10-03-2009, 11:44 PM

I have the Borla S Type and I put it on cruise and barely hear it at anywhere between 55 and 70. I don't know what people are complaining about. I can barely hear the Borlas on the highway unless I unleash the beast, then it sounds fantastic!

09-30-2009, 09:51 PM	#1
nessa131 Nessa131 Drives: 2010 Camaro 2SS RS IBM Join Date: Sep 2009 Location: Central Arkansas Posts: 326	Borla S type Catback- In Cab Noise I have seen the videos of the borla s type cat backs- and love em--- I am almost positive that is what I am going to get I have not however seen a video with the in cab drone---- does anyone have a video of this? Thanks!

10-01-2009, 03:19 PM	#3
ravensjeff 100% Chevy & Harley Man Drives: 2010 2SS: Blown LSX 376-B15 Join Date: Feb 2009 Location: Eldersburg,MD Posts: 2,211 View My Garage	To me, this "Drone" is only noticeable during acceleration. I can put my car on auto-pilot at most speeds and it's quite negligible. __________________ LSX 376-B15, TVS2300 SC, Harland Sharp Rockers w/ Trunion Bearings, ATI Balancer/keyed, AR LT Headers/Borla Catback Exhaust, DSS 1400 HP Axles, DSS aluminum driveshaft, 3.70, Hotchkis Springs/Sway bars, Forgeline SO3P Aluminum Wheels (20x9.5 F/20x11 R)w/ Hidden Titanium Hardware, Nitto NT05 Tires (27540ZR20 F/31535ZR20 R), Billet LPE brake/gas pedals, Escort 9500ci Radar Detector Laser Jammer, Roto Fab CAI with Ice Silver box, Carbon fiber tube/MAF Housing Assy, LPE Aluminum coil covers, SS9 Sleeper Fiber Glass Hood (ACS), Carbotech 1521 ceramic brake pads, Elite catch can.

10-03-2009, 11:44 PM	#14
Tanner Drives: 2010 Camaro 2SS/RS Join Date: Mar 2009 Location: Arizona Posts: 370 View My Garage	I have the Borla S Type and I put it on cruise and barely hear it at anywhere between 55 and 70. I don't know what people are complaining about. I can barely hear the Borlas on the highway unless I unleash the beast, then it sounds fantastic! __________________ 2SS/RS Victory Red / painted White Rally Stripes - 6 Speed Automatic with Tap Shifter Sands - Surprise

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Borla S type catback video	Ltdodge	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	23	03-20-2023 07:44 PM
Borla S type CatBack vs. Axle Back	nessa131	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	8	07-26-2012 10:38 PM
Borla Catback Review	Havok1327	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	24	08-31-2009 11:43 PM
Borla S Type Catback Exhaust Installed Today	ravensjeff	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	5	08-24-2009 10:53 AM
Borla Headers + Borla S Type Exhaust	DON GIOVANNI	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	7	05-05-2009 10:56 AM

10-01-2009, 12:23 AM	#2
HeavyD Drives: 1SSRS RY L99 Join Date: Aug 2009 Location: Ontario Posts: 1,329	I have asked numerous times before. There are several complaints, but no videos. I would love to hear what AFM sounds like!

10-01-2009, 03:30 PM	#4
ToddSS ZZ Motorsports Sales Rep Drives: 2010 SIM 1SS Join Date: Jul 2009 Location: moving to Texas Posts: 149	I will have mine on soon and will post up some video's.

10-01-2009, 03:33 PM	#5
SS-screamer Drives: SIM RS/SS L99 Join Date: Sep 2009 Location: Sunshine State Posts: 207	I can really notice it when it's running on 4 cylinders but I have to give a slight amount of gas to either keep up with traffic or mantain speed going up a slight incline but I'm not straining it enough to jump into 8 cylinder. It sounds like it simply doesnt have the power to to accelerate the car and is straining. Then it kicks up to 8 cylinders and the exhaust note spikes. It is very annoying in traffic.

10-02-2009, 09:15 PM	#7
nessa131 Nessa131 Drives: 2010 Camaro 2SS RS IBM Join Date: Sep 2009 Location: Central Arkansas Posts: 326	Anyone take videos yet? Thanks!

10-03-2009, 09:21 PM	#8
WySS Drives: 2010 Camaro 2SS RS M6 CGM A9125214 Join Date: Jun 2009 Location: So Cal Posts: 155	I just made this video today, its the Borla S-Type. Here is my super high tech steering wheel mount for the Samsung SL820 Camera. It involves a sock to isolate any sounds from the steering column/wheel and some masking tape to keep the camera in place(both painters tape and regular, the painters is first attached to the camera to protect the finish from the regular tape).

10-03-2009, 09:50 PM	#9
Kscott46 Drives: 2010 Black SS2, RS, MT Join Date: Oct 2009 Location: Brownsville, Texas Posts: 68	You need gas dude!!LOL ..Im amazed! NO DRONE!.. Was considering SLP LM II....Maybe Borla now! Thanks!

10-03-2009, 10:05 PM	#11
Kscott46 Drives: 2010 Black SS2, RS, MT Join Date: Oct 2009 Location: Brownsville, Texas Posts: 68	If you dont mind me asking....Is it a Full Cat? Axel?

10-03-2009, 10:15 PM	#13
GOINGSOLO2 Drives: All Models Join Date: Aug 2009 Location: NY Posts: 1,475	Give us a look too before you make a decision. We were able to make an exhaust with no drone, great quality, improved throttle response, and at a very reasonable price. http://www.camaro5.com/forums/showthread.php?t=42318