Roto-Fab BIG GULP

[RexZL1]

Hey Now,

Has anybody put the BIG GULP on their car? I put the CAI on about a week ago, and am pleased with it so far. No problems with lights coming on or anything, as promised in past forums. On the threads, the dyno results were obtained with the hood up. The Roto-Fab guys said that with the BIG GULP the results should be about the same. I just want to know if anybody has had good results or an opinion one way or the other with it.

[Azzkker]

Originally Posted by RexZL1

Hey Now,

Has anybody put the BIG GULP on their car? I put the CAI on about a week ago, and am pleased with it so far. No problems with lights coming on or anything, as promised in past forums. On the threads, the dyno results were obtained with the hood up. The Roto-Fab guys said that with the BIG GULP the results should be about the same. I just want to know if anybody has had good results or an opinion one way or the other with it.

I installed it at the same time as the CAI. It does run a little faster at the track with it on the open to filter setting. it was worth 2 mph and .1 in the 1/8th mile for me versus being set to the brake duct mode.

Its a really nice piece and worth the effort in my book.

thanks
anthony

[charlietuna]

love mine and worth the $$ on the street and track

[SSmokey]

Just to clarify the brake duct setting is to the left and the CAI setting is to the right correct?

[JDP Sales]

Originally Posted by RexZL1

Hey Now,

Has anybody put the BIG GULP on their car? I put the CAI on about a week ago, and am pleased with it so far. No problems with lights coming on or anything, as promised in past forums. On the threads, the dyno results were obtained with the hood up. The Roto-Fab guys said that with the BIG GULP the results should be about the same. I just want to know if anybody has had good results or an opinion one way or the other with it.

I agree, the big gulp is a great addition to the Roto-Fab intake system. Just looking at the location of the factory W/W reservoir tells you it's in the way of air flow. So by removing that and channeling air to the intake system, I have no doubts you could achieve the same results at speed as you can on a dyno with the hood up.

Originally Posted by SSmokey

Just to clarify the brake duct setting is to the left and the CAI setting is to the right correct?

I believe it's just the opposite.

Please feel free to call, PM or email me with any questions or Roto-Fab products. We have them in stock at great prices and free shipping

Best regards,

Tyler
888-308-6007

[CanadianZL1#992]

Originally Posted by SSmokey

Just to clarify the brake duct setting is to the left and the CAI setting is to the right correct?

I was told lever to passenger side CAI, lever to drivers side brake duct.

[DangerZL1]

Originally Posted by CanadianZL1#992

I was told lever to passenger side CAI, lever to drivers side brake duct.

The picture confirms this.

[SSmokey]

I will go switch it.

[SPOOKYGUNNER]

Originally Posted by RexZL1

Hey Now,

Has anybody put the BIG GULP on their car? I put the CAI on about a week ago, and am pleased with it so far. No problems with lights coming on or anything, as promised in past forums. On the threads, the dyno results were obtained with the hood up. The Roto-Fab guys said that with the BIG GULP the results should be about the same. I just want to know if anybody has had good results or an opinion one way or the other with it.

I just installed the Janetty Racing 75RWHP KIT
which included the Big Gulp Cai and lower pully.
I got 543.10 RWHP AND 564.12 RWT
Stock was 490 RWHP.
DEFINITELY WORTH THE $$$.

[s/c ss]

Originally Posted by SPOOKYGUNNER

I just installed the Janetty Racing 75RWHP KIT
which included the Big Gulp Cai and lower pully.
I got 543.10 RWHP AND 564.12 RWT
Stock was 490 RWHP.
DEFINITELY WORTH THE $$$.

Did you do the pulley swap yourself?

[Ledbetterjw]

Originally Posted by SPOOKYGUNNER

I just installed the Janetty Racing 75RWHP KIT
which included the Big Gulp Cai and lower pully.
I got 543.10 RWHP AND 564.12 RWT
Stock was 490 RWHP.
DEFINITELY WORTH THE $$$.

So should this kit they offer be called the 53 RWHP kit?? Where did the other 22hp go?

[SPOOKYGUNNER]

Originally Posted by s/c ss

Did you do the pulley swap yourself?

NO I HAD IT INSTALLED AT FINISH LINE AUTOMOTIVE AND PERFORMANCE HERE IN DENVER. JOHNNY SAID IT WAS A "BITCH" TO INSTALL THE LOWER PULLEY BUT I AM HAPPY WITH THE RESULTS. I FORGOT TO ADD IN THE FUEL ADDITIVE SO THE NUMBERS WERE LOWER THAN THEY SHOULD HAVE BEEN...91 OCTANE VS 97 OCTANE
WENT TO BANDIMERE SPEEDWAY AND TURNED A 12.61 AT 109.75 MPH AT A MILE HIGH....`11.77 @ 117.99 AT SEA LEVEL.

[SPOOKYGUNNER]

Originally Posted by Ledbetterjw

So should this kit they offer be called the 53 RWHP kit?? Where did the other 22hp go?

I FORGOT TO ADD THE FUEL ADDITIVE SO THE NUMBERS ARE OFF....MY BAD

[SPOOKYGUNNER]

Originally Posted by Ledbetterjw

So should this kit they offer be called the 53 RWHP kit?? Where did the other 22hp go?

I WAS RUNNING 91 OCTANE AND 32 PSI IN THE REAR WHEELS. THE KIT IS DESIGNED TO BE RUN AT 97 OCTANE AND 25 PSI REAR WHEELS.
I WENT BACK AND ADDED THE TORCO FUEL ADDITIVE AND DROPPED THE TIRE PRESSURE TO 25 OCTANE TO @ 100 AND GOT 571 RWHP WHICH CAME OUT TO @ 80 + RWHP....THE KIT WORKS AS ADVERTISED.