09-13-2013, 12:40 AM | #1 |
..[ Z06-QTR ]..
|
FS: 1177+whp IPS built 2010 Camaro
2010 2SS/RS Camaro Fully Built by IPS Motorsports.
22134miles on the car. less than 200 miles after the built on everything. Looking to get $65000 OBO over 80k spent on Mods/Labor/Tuning not including the price of the car. I have most of the Invoices that will be given to the buyer to show it too. if you don't like the price, thats fine just move on. Very simple. or just post, email, PM an offer. The worst that will happen is me saying no! obviously if I get a silly offer of 45k or whatever then most likely you wont even get a response from me. Sorry if I sound like a Jerk, but I just don't want to waste your time or mine. Basic run down ** Engine ** Forged 427ci LSX (Callies Crank/billet rods/wiesco Turbo pistons) GM Performance 6bolt LS3 Heads IPS Boost II Cam Fast 102 intake ARP hardware all through Comp short-travel Race lifters Harland Sharp Rocker Arm Tri-union upgrade Meziere electric water pump Ported and Polished throttle body ** IPS Turbo Kit ** IPS Motorsports Camaro Front Mount Intercooler -6" Thick USA Made Core -Custom Crash Bar -4" Intercooler Piping GT3794HTA Turbos Machiene vacumm block for sensor Custom Coolant fitting side of block for TT kit routing AEM tru-boost ** Drivetrain ** RPM Built TR6060 Driveshaft shop 9" rear end conversion kit W/ strange center section Farks anti wheel hop kit Hendrix Street Slayer Carbon Triple Disc Clutch kit ** Fuel System ** IPS Eliminator Drop In 1400hp Complete fuel system FIC 1100cc fuel injectors Fuel pump harness ** Exhaust ** 3" KOOKS custom 3" Muffler-less Catback exhaust Clamps and hangers for new system Hedman Headers tublaur manifold 3" Band clamp ** Oil cooler ** Setrab Oil Cooler Lingenfelter oil cooler adapter block Peterson y blocks ** Suspension/Wheels ** Pfadt Drag Suspension/Coilovers Custom 15" Rear Trailing Arms and Lower Control Arms Package C5 Corvette Rear Brake Parts Modified to Fit 15" Kit (Calipers, Brackets, Rotors, Pads, Lines, Etc.) PFADT 2010+ Camaro Adjustable Rear Tie Rods Farks Supercar 2010+ Camaro No-Hop Bushings ARP Wheel Studs Weld RT S Rear Black Center Wheels Mickey Thompson Rear Drag Radials (325/50/15) Bolt Thru Valve Stems Rear 1/4inch Wheel Spacers (Billet Aluminum) Shank Style Lug Nuts http://store.ipsmotorsports.net/cama...n-package.html I know I am messing like bunch of stuff. but this is the main components I think. Car made 1177whp on C16 around 20psi 990whp on 93oct No meth. the engine/turbo is capable for more but need to get a ProEFI or something similar to run more boost and have better control and safety. Hit me up if interested. here is couple quick pictures. I will post some good ones in the next few days. I have some good ones but I did something that caused the quality to get all messed up so I will have to get some new ones. Thanks!
__________________
- 07 Silver C6 Z06, Darton sleeved LS7, 441ci, H/C/I, Duel Stage Nitrous, RPS BC3, TR6060, E85. (615whp/582wtq N/A)
- 09 Blk Z06, 427ci LSX, F2 Procharger, Brodix, Holley, ZR1 TR6060, ... (1204whp/1045wtq @ 24psi) - 06 Blk C6, Darton Sleeved LS2, 427ci, H/C/I, F1X, RPM Trans/Diff, RPS BC3. (New #s soon) - 10 Black Camaro LS3, 2SS/RS, H/C/I, bolt-ons, Spec. (470whp/450wtq). - 07 Black Corvette C6(SOLD). - 98 White/Red Corvette C5(SOLD). Last edited by walhan_qtr; 10-22-2013 at 12:40 PM. |
09-15-2013, 11:59 AM | #2 |
Drives: 1000hp turbo 4th gen Join Date: Sep 2013
Location: ohio
Posts: 31
|
damn thats nice any 1/4 #s?
|
09-15-2013, 03:29 PM | #3 |
Drives: 2012 CTS-V, 2010 Camaro SS Join Date: Sep 2013
Location: Infront of you
Posts: 281
|
Probably get a negative response from others but damn dude you can find build TT z06s and c6s for much less than that.
GLWS.. but think you need to bring the price down a bit... There's even a 1300whp 1LE for less than this. |
09-15-2013, 03:33 PM | #4 |
..[ Z06-QTR ]..
|
never been on a track. only few highway pulls...
__________________
- 07 Silver C6 Z06, Darton sleeved LS7, 441ci, H/C/I, Duel Stage Nitrous, RPS BC3, TR6060, E85. (615whp/582wtq N/A)
- 09 Blk Z06, 427ci LSX, F2 Procharger, Brodix, Holley, ZR1 TR6060, ... (1204whp/1045wtq @ 24psi) - 06 Blk C6, Darton Sleeved LS2, 427ci, H/C/I, F1X, RPM Trans/Diff, RPS BC3. (New #s soon) - 10 Black Camaro LS3, 2SS/RS, H/C/I, bolt-ons, Spec. (470whp/450wtq). - 07 Black Corvette C6(SOLD). - 98 White/Red Corvette C5(SOLD). |
09-15-2013, 03:40 PM | #5 | |
..[ Z06-QTR ]..
|
Quote:
if there is a car that was built by a local shop that only few knows about it, it will most likely cost less and be cheaper than a car that was built by say Dallas Performance or IPS. I am not looking to get $71000 honestly, but I know how people will always lowball you, so you have to get the price up to get what you want out of it. I am open to offers just like mentioned in my first post. so if someone is interested, he/she can send me an offer and we will go from there. if I like it, then we might work the deal, if I don't, it will be very simple, I will say no or send a counter offer........ saw the 1LE. very nice car, and good build, but the stuff on this car is more and "better" quality. not saying its bad, just not the same really I like your post, such posts are fine with me... but what I don't like to see is people that most likely not even looking for a car to buy but will just come and post those little stupid offers or comments
__________________
- 07 Silver C6 Z06, Darton sleeved LS7, 441ci, H/C/I, Duel Stage Nitrous, RPS BC3, TR6060, E85. (615whp/582wtq N/A)
- 09 Blk Z06, 427ci LSX, F2 Procharger, Brodix, Holley, ZR1 TR6060, ... (1204whp/1045wtq @ 24psi) - 06 Blk C6, Darton Sleeved LS2, 427ci, H/C/I, F1X, RPM Trans/Diff, RPS BC3. (New #s soon) - 10 Black Camaro LS3, 2SS/RS, H/C/I, bolt-ons, Spec. (470whp/450wtq). - 07 Black Corvette C6(SOLD). - 98 White/Red Corvette C5(SOLD). Last edited by walhan_qtr; 09-15-2013 at 04:26 PM. |
|
09-15-2013, 04:30 PM | #6 |
Drives: 1000hp turbo 4th gen Join Date: Sep 2013
Location: ohio
Posts: 31
|
ive seen 800 wheel 5th gens built by no name shops go for 40-50k theres no reason a 1000wheel camaro built by IPS wouldnt sell for 60k+. the 71k asking price is a little high but with how bad people low ball now days I see why he is asking that.
|
09-15-2013, 04:35 PM | #7 | |
..[ Z06-QTR ]..
|
Quote:
again I am open to offers. I have invoices on this car for over $75k. can you build a similar car for less??? absolutely but it wont be IPS! that I know for sure!
__________________
- 07 Silver C6 Z06, Darton sleeved LS7, 441ci, H/C/I, Duel Stage Nitrous, RPS BC3, TR6060, E85. (615whp/582wtq N/A)
- 09 Blk Z06, 427ci LSX, F2 Procharger, Brodix, Holley, ZR1 TR6060, ... (1204whp/1045wtq @ 24psi) - 06 Blk C6, Darton Sleeved LS2, 427ci, H/C/I, F1X, RPM Trans/Diff, RPS BC3. (New #s soon) - 10 Black Camaro LS3, 2SS/RS, H/C/I, bolt-ons, Spec. (470whp/450wtq). - 07 Black Corvette C6(SOLD). - 98 White/Red Corvette C5(SOLD). |
|
09-15-2013, 06:28 PM | #8 |
Caffeine Injected
Drives: 13 Ram - 05 Widebody 1050rwhp Vette Join Date: Sep 2010
Location: Woodstock, Ga
Posts: 1,033
|
That is a beast, what is the suspension and wheels/tire setup?
A side note, I really wish we had some BST forum rules, I'm tired of people posting their 2cents on a price (or asking for pictures) when they really have no intentions of buying. |
09-15-2013, 07:02 PM | #9 |
Drives: CGM,twin turbo, cam 2010 SS/RS Join Date: Mar 2011
Location: ROCKMART, GA
Posts: 2,185
|
That 1le didn't have half the money this car has in it....
Last edited by JLE58; 09-15-2013 at 08:16 PM. |
09-15-2013, 07:04 PM | #10 |
..[ Z06-QTR ]..
|
good question lol. as I said I am forgetting bunch of stuff. Pfadt coilovers. COR wheels in the front with Nitto invo tires, and Weld Racing 15inch on the back with the small brake kit and MT tires.
__________________
- 07 Silver C6 Z06, Darton sleeved LS7, 441ci, H/C/I, Duel Stage Nitrous, RPS BC3, TR6060, E85. (615whp/582wtq N/A)
- 09 Blk Z06, 427ci LSX, F2 Procharger, Brodix, Holley, ZR1 TR6060, ... (1204whp/1045wtq @ 24psi) - 06 Blk C6, Darton Sleeved LS2, 427ci, H/C/I, F1X, RPM Trans/Diff, RPS BC3. (New #s soon) - 10 Black Camaro LS3, 2SS/RS, H/C/I, bolt-ons, Spec. (470whp/450wtq). - 07 Black Corvette C6(SOLD). - 98 White/Red Corvette C5(SOLD). Last edited by walhan_qtr; 09-15-2013 at 07:27 PM. |
09-15-2013, 07:12 PM | #11 |
..[ Z06-QTR ]..
|
Thanks exactly what I am saying. yes its making the power, but not the same quality parts and this thing have at least 25k more in it (probably even more)...
again maybe you can build a similar setup with the same power or even more, but wont be by IPS!! this car spent way to long at IPS to get it all done RIGHT. almost 1000whp on 93oct pump gas and no Meth.. you don't see that very often. and for people that don't like running Race fuel, you can always tune it on E85 if thats available at your area and get 1200+whp no problem. or run Meth which is installed now but needs to get wired. The thing I was told is I will probably need to run like a ProEFI or something similar to really be able to run more boost and get it hooking!
__________________
- 07 Silver C6 Z06, Darton sleeved LS7, 441ci, H/C/I, Duel Stage Nitrous, RPS BC3, TR6060, E85. (615whp/582wtq N/A)
- 09 Blk Z06, 427ci LSX, F2 Procharger, Brodix, Holley, ZR1 TR6060, ... (1204whp/1045wtq @ 24psi) - 06 Blk C6, Darton Sleeved LS2, 427ci, H/C/I, F1X, RPM Trans/Diff, RPS BC3. (New #s soon) - 10 Black Camaro LS3, 2SS/RS, H/C/I, bolt-ons, Spec. (470whp/450wtq). - 07 Black Corvette C6(SOLD). - 98 White/Red Corvette C5(SOLD). |
09-20-2013, 11:25 AM | #12 |
AquaRob
Drives: ABM RS\SS; 69 427 Camaro; 1970 Z28 Join Date: Mar 2010
Location: Bagram Air Base, Afghanistan
Posts: 648
|
Bad ass!! These are the numbers I'd like to get from a future build.
Where did you put the turbos? Got any engine pics to post? thanks
__________________
Centerline, Weld, Holley, Nick Williams, GMPP, Diamond, ARP, Callies, Nelson Racing, Pro Torque, Strange, J&S Polishing, RMCR, AAC, MBRP, Flowmaster, FAST, Comp Cams, RX Performance, Aeroquip, Spectrum Powder-Coating, Current Performance, RX,TDub Racing, DSS, Fore Innovations, Aeroquip, Earl's, BMR, Ximpac, MPD,Street Scene, Blood, Sweat and Tears
|
09-22-2013, 08:14 PM | #13 |
Drives: 1987 Corvette TPI Join Date: Mar 2012
Location: Littleton
Posts: 549
|
Sure wish I had the money to take that car off your hands! GLWS
|
09-23-2013, 02:34 PM | #14 |
Drives: 2013 ZL1 Join Date: Jul 2009
Location: roanoke,va
Posts: 129
|
any videos of it?? do you have any more detailed pics
|
|
|
Thread Tools | |
|
|