ADM 603rwhp and 564rwtq TVS2300 Video - Page 5 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Crowley · 09-20-2009, 10:51 AM

Quote:

Originally Posted by ADM PERFORMANCE

Yeah yeah yeah!!!!!!

We will be upgrading the Camaro and the ZR-1 to much higher standards ......A little birdie told me 700 rwhp is a nice round number,but we will see.

Andy

That little birdie is cool

freemaSSon · 09-20-2009, 02:22 PM

Quote:

Originally Posted by tsnow

How about a sound bite of the lumpity lump at idle with the new cam! Would love to hear it.

The video was done at the last minute with a not so much camera but it translates the ATTITUDE in the cam.

It has just enough lumpety without sacrirficing ALL THE BOOST!

Streetking · 09-20-2009, 09:39 PM

Quote:

Originally Posted by freemaSSon

The video was done at the last minute with a not so much camera but it translates the ATTITUDE in the cam.

It has just enough lumpety without sacrirficing ALL THE BOOST!

Thanks for posting the video, I have been to busy driving it to make another video..

SW

old motorhead · 09-21-2009, 06:44 AM

In the video, what was the guage that read, "07.7" ?

Z_Rocks · 09-21-2009, 08:07 AM

Quote:

Originally Posted by Streetking

Thanks for posting the video, I have been to busy driving it to make another video..

SW

Ok, I'm confused about the wheels. When the car is at the shop, the wheels are white and when the car is at home the wheels are black and car looks lowered. What's up with that?

Crowley · 09-21-2009, 01:42 PM

Quote:

Originally Posted by old motorhead

In the video, what was the guage that read, "07.7" ?

I'm at work so I can't see the vid, but if it is just above the steering wheel and below the gauges, that would be the boost gauge.

Crowley

Number_9 · 09-21-2009, 02:39 PM

I cannot wait to add the ARH and ADM Pulley to my mix... and the race mod for the ADM intake of course.

old motorhead · 09-21-2009, 03:15 PM

Quote:

Originally Posted by Crowley

I'm at work so I can't see the vid, but if it is just above the steering wheel and below the gauges, that would be the boost gauge.

Crowley

It's located below the DIC right in the lower middle of the dash. The car is at idle, so I don't think it's boost. I moves form 7.7 to 7.6 during the video. Sure has me stumped.

Crowley · 09-21-2009, 03:19 PM

Quote:

Originally Posted by old motorhead

It's located below the DIC right in the lower middle of the dash. The car is at idle, so I don't think it's boost. I moves form 7.7 to 7.6 during the video. Sure has me stumped.

That is the vacuum / boost gauge .. betting it is reading -7.7 or so for vacuum.

Here is mine at idle ..

old motorhead · 09-21-2009, 03:52 PM

Is that inches of vaccum or maybe negative manifold pressure?

Crowley · 09-21-2009, 05:04 PM

Quote:

Originally Posted by old motorhead

Is that inches of vaccum or maybe negative manifold pressure?

I think negative pressure .. something like this:
-8 psi would be around -17 inHg

Crowley

tsnow · 09-22-2009, 04:52 AM

Sounds good, looks like it idles around 900? Boost guage is clean and simple,

just the way I like it. After following many threads Andy sure seems to have

his sh_t together. Nice work

Streetking, with what is in your stable hope you

have bought stock in U.S. rubber!

Z_Rocks · 09-22-2009, 06:42 AM

Quote:

Originally Posted by tsnow

Streetking, with what is in your stable hope you

have bought stock in U.S. rubber!

What are you talking about? He "Owns" the U.S. rubber...

Streetking · 09-22-2009, 11:39 AM

Quote:

Originally Posted by Z_Rocks

Ok, I'm confused about the wheels. When the car is at the shop, the wheels are white and when the car is at home the wheels are black and car looks lowered. What's up with that?

I just put on the stock wheels for transport and dyno..

SW

09-21-2009, 02:39 PM	#63
Number_9 Drives: 2010 2SS/RS L99 Join Date: Mar 2009 Location: Trophy Club, TX Posts: 1,464 View My Garage	I cannot wait to add the ARH and ADM Pulley to my mix... and the race mod for the ADM intake of course. __________________

09-22-2009, 04:52 AM	#68
tsnow Drives: 12' ZL1, AGM 6M Join Date: Jun 2009 Location: 49th state Posts: 249	Sounds good, looks like it idles around 900? Boost guage is clean and simple, just the way I like it. After following many threads Andy sure seems to have his sh_t together. Nice work Streetking, with what is in your stable hope you have bought stock in U.S. rubber! Last edited by tsnow; 09-22-2009 at 04:59 AM. Reason: sp

09-21-2009, 06:44 AM	#60
old motorhead Drives: Maggie blown LS3 vette Join Date: Aug 2009 Location: SE TX Posts: 1,490	In the video, what was the guage that read, "07.7" ?

09-21-2009, 03:52 PM	#66
old motorhead Drives: Maggie blown LS3 vette Join Date: Aug 2009 Location: SE TX Posts: 1,490	Is that inches of vaccum or maybe negative manifold pressure?