Suede Emergency Brake Cover - Page 5 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Wildcherry13 · 03-08-2014, 11:10 PM

Does the red stitching have to be so close together on the top side of the brake handle? I woukd like one but id like to get the stitching further apart like one on the left side and one on the right side. Would that be possible to order?

RedlineGoods · 03-11-2014, 03:44 PM

Quote:

Originally Posted by Firefighter

From the pictures the BMW seems to be the right combo. What if it is wrong though? Computer colors can be inaccurate. Would I be able to exchange it for the other one?

Of course

Take care
Jack
RedlineGoods Team

RedlineGoods · 03-11-2014, 03:55 PM

Quote:

Originally Posted by 29er

i like the option of all your tread colors.

Great to hear that

Which is your favourite?

BTW - this is not all, we will soon introduce a few more stitching and leather colors - Stay tuned!

Take care
Jack
RedlineGoods Team

RedlineGoods · 03-11-2014, 04:39 PM

Quote:

Originally Posted by Wildcherry13

Does the red stitching have to be so close together on the top side of the brake handle? I woukd like one but id like to get the stitching further apart like one on the left side and one on the right side.

Is this what you mean?

We can of course do it - you just need to pick a STRIPE option on our order form - this way we will insert a stripe to the top of the handle cover and put seams on the sides.

Take care
Jack
RedlineGoods Team

Firefighter · 03-11-2014, 05:32 PM

Quote:

Originally Posted by RedlineGoods

Of course

Take care
Jack
RedlineGoods Team

I'll be ordering one soon then. Thanks.

Sent from my DROID RAZR HD using Tapatalk

Cleancoupe · 03-11-2014, 07:51 PM

Since this was my idea, I think I should get the first one made for free.

I'll make sure to give a full review of it & post pics.

Wildcherry13 · 03-11-2014, 10:36 PM

Quote:

Originally Posted by RedlineGoods

Is this what you mean?

We can of course do it - you just need to pick a STRIPE option on our order form - this way we will insert a stripe to the top of the handle cover and put seams on the sides.

Take care
Jack
RedlineGoods Team

Yes that's more like it!

but I would really like it a little more apart to where its literally on opposite sides from one another. Would that that be possible?

RedlineGoods · 03-12-2014, 03:16 AM

We can try

Take care

Jack
RedlineGoods Team

RedlineGoods · 03-12-2014, 03:20 AM

Quote:

Originally Posted by Cleancoupe

Since this was my idea, I think I should get the first one made for free.

Well, in fact it was LittleReEntryRacer who first contacted us about this idea

But, since it was indeed you, who started this thread an apaprently make him email us, and you are willing to

Quote:

Originally Posted by Cleancoupe

make sure to give a full review of it & post pics.

let me offer you a FULL REFUND upon review with photos of the cover installed in your car

How does that sound?

Take care

Jack
RedlineGoods Team

RedlineGoods · 03-12-2014, 12:44 PM

OK guys, We finished redesigning our full-length ebrake handle cover:

We finished he bottom with the stitch in the fabric color so that there is no ugly edge. The finishing of the tip is a bit tricky though - we just enlarged the hole around release button with x-acto knife (factory plastic is soft enough to do it easily) and then glued and tucked the top end of the cover inside the lever around the button.

What do you think?

Take care

Jack
RedlineGoods Team

honor first · 03-12-2014, 01:21 PM

pretty cool, whats something like that running. good work though!

Cleancoupe · 03-12-2014, 02:12 PM

Quote:

Originally Posted by RedlineGoods

Well, in fact it was LittleReEntryRacer who first contacted us about this idea

But, since it was indeed you, who started this thread an apaprently make him email us, and you are willing tolet me offer you a FULL REFUND upon review with photos of the cover installed in your car

How does that sound?

Take care

Jack
RedlineGoods Team

That sounds great to me.

Wilsonation · 03-12-2014, 03:30 PM

Quote:

Originally Posted by RedlineGoods

OK guys, We finished redesigning our full-length ebrake handle cover:

We finished he bottom with the stitch in the fabric color so that there is no ugly edge. The finishing of the tip is a bit tricky though - we just enlarged the hole around release button with x-acto knife (factory plastic is soft enough to do it easily) and then glued and tucked the top end of the cover inside the lever around the button.

What do you think?

Take care

Jack
RedlineGoods Team

Tough to see on my phone, but looks pretty decent!

LittleReEntryRacer · 03-12-2014, 05:57 PM

Do we order through you or wait for the website to be updated?

03-12-2014, 01:21 PM	#67
honor first MURICA! Drives: 2014 2SS 1LE Join Date: Sep 2013 Location: RGV, Texas Posts: 459	pretty cool, whats something like that running. good work though! __________________ *Pro Amore Patriae* God gave three gifts to man; dogs, women, and the LS motor. 2014 Camaro 2SS 6MT RS 1LE Black on Black AFE Intake, Stainless Power Headers + HFC, BadlanzHPE Electric Cutouts. 315/275 Nittos, Wheels. Debadged, Cosmetic Mods, Sound System, More

03-08-2014, 11:10 PM	#57
Wildcherry13 Drives: 2013 2SS/RS IOM 1LE Join Date: Mar 2013 Location: Houston Posts: 330	Does the red stitching have to be so close together on the top side of the brake handle? I woukd like one but id like to get the stitching further apart like one on the left side and one on the right side. Would that be possible to order?

03-11-2014, 07:51 PM	#62
Cleancoupe Drives: 18 ZL1 1LE Join Date: Apr 2013 Location: Florida Posts: 703	Since this was my idea, I think I should get the first one made for free. I'll make sure to give a full review of it & post pics.

03-12-2014, 03:16 AM	#64
RedlineGoods Drives: Bumblebee :-) Join Date: Nov 2011 Location: Wilmington, DE Posts: 146	We can try Take care Jack RedlineGoods Team

03-12-2014, 12:44 PM	#66
RedlineGoods Drives: Bumblebee :-) Join Date: Nov 2011 Location: Wilmington, DE Posts: 146	OK guys, We finished redesigning our full-length ebrake handle cover: We finished he bottom with the stitch in the fabric color so that there is no ugly edge. The finishing of the tip is a bit tricky though - we just enlarged the hole around release button with x-acto knife (factory plastic is soft enough to do it easily) and then glued and tucked the top end of the cover inside the lever around the button. What do you think? Take care Jack RedlineGoods Team

03-12-2014, 05:57 PM	#70
LittleReEntryRacer Drives: 2014 Camaro 2SS 1LE Join Date: Dec 2013 Location: Langley, BC, Canada Posts: 133	Do we order through you or wait for the website to be updated?