10-09-2009, 12:42 PM | #1 |
Drives: 10 SIM 2SS/RS LS3 Join Date: May 2008
Location: Winston-Salem, NC
Posts: 1,940
|
Updated-Pics of the new Magnaflow cat-back on her!
Just got this done this morning by a buddy of mine that runs a performance shop. This is only my second day being able to drive the car and I had the 3" Magnaflow cat-back competition series stainless steel system installed. He took photos before and after. The first 3 photos are before. The last ones are after. The stock exhaust is not a thing of beauty. The new system sounds great, deeper tone, no cracklin and less back pressure, plus adds some hp. Can't tell from the outside that much anything was done unless you get up close to the tips that are 4". I took some more photos today of the mufflers and tips. (got a little road grime on the mufflers-I'll be cleaning those again next time I detail!) I'm trying so hard not to get on the pedal too much!
__________________
5th Gen Camaros of the Carolinas SIM, 2SS/RS LS3 5/7/11 453.9 RWHP 427.5 RWTQ
VMS Stage 2.5 Comp Cams kit, Cold Air Inductions intake, ADM race scoop, DT 1 3/4" headers, Solo cats, 3" Magnaflow catback, Pypes cutouts, HP tune, H&R SuperSport springs, Eibach sways/spacers, TexasSpeed UD pulley, LSR tensioner pulley, Barton shifter, skip shift eliminator, powder-coated calipers, R1 concept rotors, StopTech pads, Granatelli wires, Lloyds mats, tint, AAC afterburner taillamps, AAC scanner/sidemarkers, SRP pedals, custom engine cover, black bowties, Ridergraphix hood spears.... Last edited by topgun1; 10-14-2009 at 02:58 PM. |
10-09-2009, 05:07 PM | #2 |
Love's to Detail
Drives: 2010 SS,97silverado/08crewcab Join Date: Oct 2008
Location: Greenville SC.
Posts: 1,421
|
Nice pics,but what about the vid?
|
10-09-2009, 06:29 PM | #3 |
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
Best exhaust ever for the camaro....MY OPINION!
|
10-09-2009, 07:29 PM | #4 |
Drives: Wild Cherry Join Date: Nov 2008
Location: Keller, Texas
Posts: 430
|
I would agree with Andy............
__________________
2010 RJT 2SS/RS L99 CAMARO ARH 1 7/8" LT HEADERS W/ HF CATS MAGNAFLOW 3" COMP EXHAUST ADM PERFORMANCE CAI ADM PERFORMANCE CUSTOM TUNE ADM PERFORMANCE PORTED THROTTLE BODY ADM PERFORMANCE TRANS COOLER 3.45 GEARS BMR TRAILING ARMS |
10-09-2009, 07:31 PM | #5 |
Drives: 2SS/RS - Black - GFX Join Date: Nov 2008
Location: B'ham, Alabama
Posts: 2,458
|
vid?
you know u can just show exhaust pics without a vid right
__________________
Ordered: 10-13-08
Built: 3-30-09 (#1691) Recieved: 6-12-09 Blacked out, Cammed (Lunati Voodoo 233/245, .578/.598 @114°, +4°), ARH LTs, VR OTR CAI, Cutouts, and lots of other fun mods. |
10-09-2009, 07:48 PM | #6 |
Drives: 10 SIM 2SS/RS LS3 Join Date: May 2008
Location: Winston-Salem, NC
Posts: 1,940
|
Yeah sorry no vid, I just gave the guy my camera and asked him to take a few shots while I was away. Didn't want some grainy cell phone vid where you can't hear it anything like it sounds. But anyway, awesome exhaust-i've had Magnaflow's on 2 vehicles before and wouldn't do anything else- and it's already sounding even better than it did this morning since it's been warmed up and some metal burned off. It's getting even deeper in sound and has a great hum at highway speeds.
__________________
5th Gen Camaros of the Carolinas SIM, 2SS/RS LS3 5/7/11 453.9 RWHP 427.5 RWTQ
VMS Stage 2.5 Comp Cams kit, Cold Air Inductions intake, ADM race scoop, DT 1 3/4" headers, Solo cats, 3" Magnaflow catback, Pypes cutouts, HP tune, H&R SuperSport springs, Eibach sways/spacers, TexasSpeed UD pulley, LSR tensioner pulley, Barton shifter, skip shift eliminator, powder-coated calipers, R1 concept rotors, StopTech pads, Granatelli wires, Lloyds mats, tint, AAC afterburner taillamps, AAC scanner/sidemarkers, SRP pedals, custom engine cover, black bowties, Ridergraphix hood spears.... |
10-09-2009, 09:17 PM | #7 |
Drives: Silver Ice 2SS M6 Join Date: Jun 2009
Location: Ft. Worth, TX
Posts: 136
|
This is the exhaust that I am really looking at getting.
|
10-09-2009, 09:56 PM | #8 |
Drives: Wild Cherry Join Date: Nov 2008
Location: Keller, Texas
Posts: 430
|
you will not be disappointed............I have it on mine with AR Headers, and a ADM intake
__________________
2010 RJT 2SS/RS L99 CAMARO ARH 1 7/8" LT HEADERS W/ HF CATS MAGNAFLOW 3" COMP EXHAUST ADM PERFORMANCE CAI ADM PERFORMANCE CUSTOM TUNE ADM PERFORMANCE PORTED THROTTLE BODY ADM PERFORMANCE TRANS COOLER 3.45 GEARS BMR TRAILING ARMS |
10-09-2009, 10:17 PM | #9 |
Drives: Silver Ice 2SS M6 Join Date: Jun 2009
Location: Ft. Worth, TX
Posts: 136
|
Hey Melson you are in my neck of the woods. Would you mind meeting up so I can check out your car to see how it sounds in person and how loud the noise is inside the car?
|
10-09-2009, 10:20 PM | #10 |
Whipped
|
wish I would have waited. . . I like the 3" over the 2.5 street series I got.
__________________
|
10-09-2009, 10:43 PM | #11 |
Dog Is My Copilot
Drives: 2011 2SS/RS LS3 Join Date: Jun 2009
Location: Pittsburgh, PA
Posts: 1,394
|
Andy, have you ever done a comparison between Magnaflow's x-pipe and the others available? I remember you saying in another thread that other designs had a better merge.
__________________
|
10-10-2009, 01:06 AM | #12 |
Account Suspended
Drives: 2012 ZL1 & 2010 2SS/RS Join Date: Jul 2009
Location: Maryland
Posts: 3,378
|
Looks good! The stock mufflers look like damn gas tanks.
|
10-10-2009, 10:20 AM | #13 |
Drives: Wild Cherry Join Date: Nov 2008
Location: Keller, Texas
Posts: 430
|
Nope, I would not mind at all.....
__________________
2010 RJT 2SS/RS L99 CAMARO ARH 1 7/8" LT HEADERS W/ HF CATS MAGNAFLOW 3" COMP EXHAUST ADM PERFORMANCE CAI ADM PERFORMANCE CUSTOM TUNE ADM PERFORMANCE PORTED THROTTLE BODY ADM PERFORMANCE TRANS COOLER 3.45 GEARS BMR TRAILING ARMS |
10-10-2009, 11:56 AM | #14 |
Drives: 10 SIM 2SS/RS LS3 Join Date: May 2008
Location: Winston-Salem, NC
Posts: 1,940
|
yeah, butt ugly.
__________________
5th Gen Camaros of the Carolinas SIM, 2SS/RS LS3 5/7/11 453.9 RWHP 427.5 RWTQ
VMS Stage 2.5 Comp Cams kit, Cold Air Inductions intake, ADM race scoop, DT 1 3/4" headers, Solo cats, 3" Magnaflow catback, Pypes cutouts, HP tune, H&R SuperSport springs, Eibach sways/spacers, TexasSpeed UD pulley, LSR tensioner pulley, Barton shifter, skip shift eliminator, powder-coated calipers, R1 concept rotors, StopTech pads, Granatelli wires, Lloyds mats, tint, AAC afterburner taillamps, AAC scanner/sidemarkers, SRP pedals, custom engine cover, black bowties, Ridergraphix hood spears.... |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Magnaflow axle back exhaust/Predator programmer package - $739.99 | tbyrne | V8 Bolt-Ons & Tunes | 0 | 09-18-2009 08:54 AM |
ADM / Magnaflow 3" system for the ARH Catted system - Pics and thoughts | Crowley | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 26 | 09-17-2009 04:51 PM |
Cat back or axle back? | norcalwheelman | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 2 | 07-22-2009 08:15 AM |
Cat back gains? | 8ty8 ls1 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 0 | 07-21-2009 12:46 PM |
5% hp increase for aftermarket cat back? | Fogey | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 9 | 06-02-2009 11:06 AM |