Anyone else have a XD700/5 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

josephs8 · 03-20-2012, 01:00 PM

Wondering if anyone else has a XD700/5. I am wondering what you set for your Input Sensitivity and what you setup your HP Filter Mode for Channel 1&2 and Filter Mode for Channel 3&4. What frequency have you setup to filter at? I am just about ready to get mine completely hooked up but just wanted to see what settings other people had to try out a whole combination of settings.

I am going to connect the rear 6x9 tweeters later today with the adapter supplied. Not sure how many people have done that yet.

EDGE_ · 03-20-2012, 06:52 PM

I am using a XD700/5 with a JL Audio 12W3v3-2 sub-woofer.
I configured the Input Sensitivity using the 9-step calibration procedure in the manual with a 2 ohm nominal impedance.
Channel 1&2 - HP Filter 1X. Filter Freq - 80
Channel 3&4 - Filter Mode OFF

josephs8 · 03-21-2012, 05:31 AM

Thanks EDGE_

Thats the exact configuration I am going with. Going to order my sub (12w3v3-2) very soon.

what filtering did you do on your sub?

Did you end up hooking up your tweeters in the rear? I am trying to decide if I want to order the bass blockers or not to hook them up.

EDGE_ · 03-21-2012, 03:32 PM

I bought the bass blockers but haven't hooked them up yet. I decided to try them for awhile without it and I am going to install them this weekend and run it for a week and then decide which I like best.

Right now I am running the sub at 24dB and it sounds pretty good but I'll probably switch it to 12dB.

03-20-2012, 01:00 PM	#1
josephs8 Drives: 2011 Yellow 2LT RS Camaro Join Date: Apr 2011 Location: Kalamazoo mi Posts: 84	Anyone else have a XD700/5 Wondering if anyone else has a XD700/5. I am wondering what you set for your Input Sensitivity and what you setup your HP Filter Mode for Channel 1&2 and Filter Mode for Channel 3&4. What frequency have you setup to filter at? I am just about ready to get mine completely hooked up but just wanted to see what settings other people had to try out a whole combination of settings. I am going to connect the rear 6x9 tweeters later today with the adapter supplied. Not sure how many people have done that yet. Last edited by josephs8; 03-20-2012 at 02:50 PM.

03-21-2012, 05:31 AM	#3
josephs8 Drives: 2011 Yellow 2LT RS Camaro Join Date: Apr 2011 Location: Kalamazoo mi Posts: 84	Thanks EDGE_ Thats the exact configuration I am going with. Going to order my sub (12w3v3-2) very soon. what filtering did you do on your sub? Did you end up hooking up your tweeters in the rear? I am trying to decide if I want to order the bass blockers or not to hook them up. Last edited by josephs8; 03-21-2012 at 08:20 AM.

03-20-2012, 06:52 PM	#2
EDGE_ Drives: 2010 1SS/RS SIM L99 Join Date: Jul 2009 Location: Houston, TX Posts: 153	I am using a XD700/5 with a JL Audio 12W3v3-2 sub-woofer. I configured the Input Sensitivity using the 9-step calibration procedure in the manual with a 2 ohm nominal impedance. Channel 1&2 - HP Filter 1X. Filter Freq - 80 Channel 3&4 - Filter Mode OFF

03-21-2012, 03:32 PM	#4
EDGE_ Drives: 2010 1SS/RS SIM L99 Join Date: Jul 2009 Location: Houston, TX Posts: 153	I bought the bass blockers but haven't hooked them up yet. I decided to try them for awhile without it and I am going to install them this weekend and run it for a week and then decide which I like best. Right now I am running the sub at 24dB and it sounds pretty good but I'll probably switch it to 12dB.