Adding subwoofers to 2013 ss with my link - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Msmall143 · 10-16-2013, 09:27 PM

Hey guys,

I've looked on here a bit and haven't seen anything specific as to what I need to upgrade my system on a 2013 ss. I've seen lots on the 2010-12's but given that the 2013's changed a bit with my link I just don't know what I need.

I'd like to add a sub or 2 but want to do it the right way. Any advise would be appreciated, even if its a link to a thread. But please be specific to the 2013's

I also welcome Pam's or responses from forum sponsors.

So what and how have you upgrades your 13's with my link?

45thCamaro · 10-16-2013, 11:06 PM

See if the sub thump harness supports 2013. If it does, just get that harness. Works well for me.

Ajdin@A2BMotorsport · 10-17-2013, 01:55 AM

Just get a high power line out converter and wire it into the amp on the drivers side trunk, I used the rear speaker outputs and then tapped the factory remote for my remote wire. I suggest investing in a good Line Out Converter though you will notice a difference. I used the Audiocontrol LC2i, it works great.

Im running 1 Cerwin Vega 10 in a 1.2 cubic foot slot ported enclosure and a JBL Amp. Im only pushing 175 watts RMS and it sounds awesome cause how small the cabin is.

lfree11012 · 10-17-2013, 01:58 AM

If you are plan on adding just the sub the franks harnes will be fine

Msmall143 · 10-17-2013, 06:12 AM

Quote:

Originally Posted by 45thCamaro

See if the sub thump harness supports 2013. If it does, just get that harness. Works well for me.

That's why I posted this....to see if anyone had used it on a 13

Msmall143 · 10-17-2013, 06:14 AM

Where are you guys adding te remote?

45thCamaro · 10-17-2013, 06:58 AM

Quote:

Originally Posted by Msmall143

That's why I posted this....to see if anyone had used it on a 13

Hopefully someone will chime in, but as long as they didn't change the amp on the 13's it should work

Maybe find out the part numbers for both a 12 amp and a 13 amp. It works in my 12.

Evotion · 10-17-2013, 10:11 AM

Just did a few weeks ago on my '13. Same amp, no issues. Works fine.

Lord Ryan · 10-17-2013, 11:39 AM

http://www.camaro5.com/forums/showthread.php?t=315902

******** T harness. Worked a lot better than the in line converter. 13 2lt rs with mylink. You need a mono amp for the sub, the factory amp is weak!

http://********.com/Chevrolet-GMC-Su...t-Product.html

A lot of members recommended calling Steve from ********. He'll tell you exactly what you need. Seems to be trustworthy.

Lord Ryan · 10-17-2013, 11:50 AM

Also see http://www.camaro5.com/forums/showthread.php?t=316200

JimE · 10-17-2013, 06:16 PM

The harness still works. The amp/wiring didn't change.

There are many of us using it, myself included. You can get the whole kit from ******** or piece it together yourself.

10-16-2013, 09:27 PM	#1
Msmall143 Drives: Camaro Join Date: Sep 2013 Location: NOVA Posts: 1,718	Adding subwoofers to 2013 ss with my link Hey guys, I've looked on here a bit and haven't seen anything specific as to what I need to upgrade my system on a 2013 ss. I've seen lots on the 2010-12's but given that the 2013's changed a bit with my link I just don't know what I need. I'd like to add a sub or 2 but want to do it the right way. Any advise would be appreciated, even if its a link to a thread. But please be specific to the 2013's I also welcome Pam's or responses from forum sponsors. So what and how have you upgrades your 13's with my link?

10-17-2013, 11:39 AM	#9
Lord Ryan Drives: Chevy Prelude RS V4 Hot Pink Ed. Join Date: Jun 2013 Location: Avon Lake Posts: 308	http://www.camaro5.com/forums/showthread.php?t=315902 ****** T harness. Worked a lot better than the in line converter. 13 2lt rs with mylink. You need a mono amp for the sub, the factory amp is weak! http://****.com/Chevrolet-GMC-Su...t-Product.html A lot of members recommended calling Steve from ****. He'll tell you exactly what you need. Seems to be trustworthy. __________________ Multiple coated Plasti-dipped rims. Double dipped blacked out Bowtie. Quad low quality plastic flat black tail light bezels. Super charged vanilla air freshner. DIY sound system.** Last edited by Lord Ryan; 10-17-2013 at 11:55 AM.

10-17-2013, 11:50 AM	#10
Lord Ryan Drives: Chevy Prelude RS V4 Hot Pink Ed. Join Date: Jun 2013 Location: Avon Lake Posts: 308	Also see http://www.camaro5.com/forums/showthread.php?t=316200 __________________ Multiple coated Plasti-dipped rims. Double dipped blacked out Bowtie. Quad low quality plastic flat black tail light bezels. Super charged vanilla air freshner. DIY sound system.

10-16-2013, 11:06 PM	#2
45thCamaro Drives: 2012 Camaro 45th Anniversary RS Join Date: Nov 2012 Location: New York Posts: 2,418	See if the sub thump harness supports 2013. If it does, just get that harness. Works well for me.

10-17-2013, 01:55 AM	#3
Ajdin@A2BMotorsport Account Suspended Drives: 2013 Camaro 1SS/1LE Join Date: Feb 2013 Location: Waterloo Posts: 609	Just get a high power line out converter and wire it into the amp on the drivers side trunk, I used the rear speaker outputs and then tapped the factory remote for my remote wire. I suggest investing in a good Line Out Converter though you will notice a difference. I used the Audiocontrol LC2i, it works great. Im running 1 Cerwin Vega 10 in a 1.2 cubic foot slot ported enclosure and a JBL Amp. Im only pushing 175 watts RMS and it sounds awesome cause how small the cabin is.

10-17-2013, 01:58 AM	#4
lfree11012 Drives: 2018 1LE Join Date: Feb 2013 Location: delaware Posts: 319	If you are plan on adding just the sub the franks harnes will be fine

10-17-2013, 06:14 AM	#6
Msmall143 Drives: Camaro Join Date: Sep 2013 Location: NOVA Posts: 1,718	Where are you guys adding te remote?

10-17-2013, 10:11 AM	#8
Evotion Warehouse 13 Survivor!!!! Drives: '13 ZL1 - 69' Camaro Join Date: Sep 2008 Location: Tucson, AZ Posts: 802 View My Garage	Just did a few weeks ago on my '13. Same amp, no issues. Works fine.

10-17-2013, 06:16 PM	#11
JimE Drives: 2013 2SS/RS/1LE Join Date: Apr 2010 Location: St Louis, MO Posts: 3,087	The harness still works. The amp/wiring didn't change. There are many of us using it, myself included. You can get the whole kit from ******** or piece it together yourself.