Great Lakes Dragaway - Page 11 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Pro Stock John · 05-18-2013, 11:32 AM

Though when you think about it, you are only down about 1-1.5 mph compared to the last pass right? What the 60 the same? Lookin' at your 11.18 slip, I was kinda thinking you'd need 101 at the 1/8th to run 10.99, which is a very anecdotal observation. Then again a 1.70 on the current setup would net a 10.99 I think too.

I'm moving forward on new tire combo, might take a little time for me to get everything here but I'm going to do it.

Motion427 · 05-18-2013, 11:37 AM

Cool.
A little fine tune,and you'll be there.

Same here,hopefully in the next couple of weeks,I'll be testing the new combo on the Camaro.Hope to break in the 11.xx

xjer22x · 05-18-2013, 12:44 PM

Quote:

Originally Posted by Pro Stock John

Though when you think about it, you are only down about 1-1.5 mph compared to the last pass right? What the 60 the same? Lookin' at your 11.18 slip, I was kinda thinking you'd need 101 at the 1/8th to run 10.99, which is a very anecdotal observation. Then again a 1.70 on the current setup would net a 10.99 I think too.

I'm moving forward on new tire combo, might take a little time for me to get everything here but I'm going to do it.

these are from my trip out at the end of last year.

11.416 @ 125.87 - 1.921
11.416 @ 126.61 - 1.941
11.239 @ 127.40 - 1.879
11.504 @ 127.71 - 1.960
11.506 @ 127.04 - 1.976

and then these are from tuesday.

11.429 @ 125.80 - 1.951 60ft
11.313 @ 125.69 - 1.847 60ft
11.273 @ 126.81 - 1.971 60ft
11.184 @ 125.73 - 1.786 60ft
11.441 @ 126.76 - 1.916 60ft

so realistically yes its more like 1-1.5mph. And that is still being super rich. Plus the DA from last year was almost -2000.... so i think if i get it fine tuned, i might be able to pull a 130mph now.

Quote:

Originally Posted by Motion427

Cool.
A little fine tune,and you'll be there.

Same here,hopefully in the next couple of weeks,I'll be testing the new combo on the Camaro.Hope to break in the 11.xx

Keep us posted! PSJ is on the same journey. Whats your current best?

steveo9043 · 05-18-2013, 04:24 PM

Following this thread is not helping my bank account! I've got the headers and drop springs sitting in a shopping cart.... TALK ME OUT OF IT!!!! Lol

Motion427 · 05-18-2013, 04:33 PM

Long tube,exhaust,CAI w/scoop ,17" rear DR. 12.58 at 112.7mph(last year)
This winter,we added a 3.45 diff and a cam pkg.
In the next week or so, i'll also add a 2800 converter.
Then it will be track and dyno testing.

steveo9043 · 05-18-2013, 04:45 PM

Quote:

Originally Posted by Motion427

Long tube,exhaust,CAI w/scoop ,17" rear DR. 12.58 at 112.7mph(last year)
This winter,we added a 3.45 diff and a cam pkg.
In the next week or so, i'll also add a 2800 converter.
Then it will be track and dyno testing.

What cam? I'm assuming its a smaller cam since you aren't running the converter already.

xjer22x · 05-18-2013, 05:28 PM

Quote:

Originally Posted by steveo9043

Following this thread is not helping my bank account! I've got the headers and drop springs sitting in a shopping cart.... TALK ME OUT OF IT!!!! Lol

DO IT IF YOU'RE COOL!

Quote:

Originally Posted by Motion427

Long tube,exhaust,CAI w/scoop ,17" rear DR. 12.58 at 112.7mph(last year)
This winter,we added a 3.45 diff and a cam pkg.
In the next week or so, i'll also add a 2800 converter.
Then it will be track and dyno testing.

you got 11's written all over it. That stall will help that 60ft too with the right rubber. You running 18's?

sent from my galaxy s3. that would explain the errors.

Motion427 · 05-19-2013, 06:54 PM

Quote:

Originally Posted by steveo9043

What cam? I'm assuming its a smaller cam since you aren't running the converter already.

Right now,I'm running the JRE 470 cam pkg.
Runs ok with the stock converter,but it tends to creep foward a bit, not bad, too much for my liking.Wanted to run a converter anyway.Lol....

Motion427 · 05-19-2013, 06:58 PM

Quote:

Originally Posted by xjer22x

DO IT IF YOU'RE COOL!

you got 11's written all over it. That stall will help that 60ft too with the right rubber. You running 18's?

sent from my galaxy s3. that would explain the errors.

I hope so.
I'm running M/T 295/45/17 drag radials on 17x10 Welds.
Was hooking great last summer.Even my Nitto 315's was hooking pretty good.
I think my best 60ft was 1.9x

xjer22x · 05-19-2013, 07:15 PM

Quote:

Originally Posted by Motion427

I hope so.
I'm running M/T 295/45/17 drag radials on 17x10 Welds.
Was hooking great last summer.Even my Nitto 315's was hooking pretty good.
I think my best 60ft was 1.9x

All you need is a decent 1.8x and you got it for sure. I think with the converter you can pull it off

and PSJ... found out tunes are backed up until mid june :-/ thats a long time to wait.

Pro Stock John · 05-19-2013, 07:23 PM

Jerry do you have HPT?

xjer22x · 05-19-2013, 07:24 PM

yeah, i paid my buddy $100 for credits so i can use it whenever i need it.

check this out http://www.camaro5.com/forums/showthread.php?t=295550

Pro Stock John · 05-19-2013, 07:26 PM

I have it too.

Maybe it's time to tune our own cars.

xjer22x · 05-19-2013, 07:28 PM

Quote:

Originally Posted by Pro Stock John

I have it too.

Maybe it's time to tune our own cars.

i might just have to take a shot at it. Maybe we can teach each other lol.

05-18-2013, 11:32 AM	#141
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,216	Though when you think about it, you are only down about 1-1.5 mph compared to the last pass right? What the 60 the same? Lookin' at your 11.18 slip, I was kinda thinking you'd need 101 at the 1/8th to run 10.99, which is a very anecdotal observation. Then again a 1.70 on the current setup would net a 10.99 I think too. I'm moving forward on new tire combo, might take a little time for me to get everything here but I'm going to do it. __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800

05-18-2013, 04:24 PM	#144
steveo9043 Drives: 2012 45th AE 2SS Coupe Join Date: Sep 2011 Location: Chicago IL Posts: 1,125	Following this thread is not helping my bank account! I've got the headers and drop springs sitting in a shopping cart.... TALK ME OUT OF IT!!!! Lol __________________ 2012 45th L99 SS-Cold air inductions CAI-Dynatech LT's-Solo mach XL catback 333hp/341tq (before LT's)

05-19-2013, 07:23 PM	#151
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,216	Jerry do you have HPT? __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800

05-19-2013, 07:24 PM	#152
xjer22x Drives: 2010 rs/ss black # 10,308 Join Date: Mar 2009 Location: hoffman estates, il Posts: 914 View My Garage	yeah, i paid my buddy $100 for credits so i can use it whenever i need it. check this out http://www.camaro5.com/forums/showthread.php?t=295550 __________________ SYCK SS BUILD JOURNAL- Click here

05-19-2013, 07:26 PM	#153
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,216	I have it too. Maybe it's time to tune our own cars. __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800

05-18-2013, 11:37 AM	#142
Motion427 Account Suspended Drives: 2010 2SS/RS Red Jewel L99 Join Date: Jun 2011 Location: NB,Canada Posts: 834	Cool. A little fine tune,and you'll be there. Same here,hopefully in the next couple of weeks,I'll be testing the new combo on the Camaro.Hope to break in the 11.xx

05-18-2013, 04:33 PM	#145
Motion427 Account Suspended Drives: 2010 2SS/RS Red Jewel L99 Join Date: Jun 2011 Location: NB,Canada Posts: 834	Long tube,exhaust,CAI w/scoop ,17" rear DR. 12.58 at 112.7mph(last year) This winter,we added a 3.45 diff and a cam pkg. In the next week or so, i'll also add a 2800 converter. Then it will be track and dyno testing.