Which wire do I cut???

[A_DILLA]

Hey everyone this link below says to cut the left wire but which one is it? I cut the blue wore and my signals where still on and it didn't blink when I hit the signal just stayed on..

http://www.camaro5.com/forums/showthread.php?t=220780

[MGD]

You cut the wire on the LIGHT BULB, not on the connector. Look at your link.

[A_DILLA]

Originally Posted by MGD

You cut the wire on the LIGHT BULB, not on the connector. Look at your link.

So i have to remove the bulb and there should be a wire?

[MGD]

Not blue wire, the bulb has 4 wires on it. 2 ground, 1 turn signal and the other DRL. Look at the picture of the bulb in your link. He cut the wire on the bulb, like he did. Hold the bulb like he did, SILVANIA torte you, bulb up, then cut the left wire. No more running light.

[A_DILLA]

Originally Posted by MGD

Not blue wire, the bulb has 4 wires on it. 2 ground, 1 turn signal and the other DRL. Look at the picture of the bulb in your link. He cut the wire on the bulb, like he did. Hold the bulb like he did, SILVANIA torte you, bulb up, then cut the left wire. No more running light.

Gotcha.. im gonna pop the bulb off the connector or the socket and then I'll cut the wire..

[MLAZ1990]

I disconnected the bulb from the wire and there was 2 clip like things things. I cut the one on the left...they weren't exactly wires...

[R6P]

Couldn't resist...

[MLAZ1990]

I think the one on the left was black, that's the one I cut.

[A_DILLA]

Got it! Worked like a charm thanks man...

[MLAZ1990]

Originally Posted by A_DILLA

Got it! Worked like a charm thanks man...

Np!!! It look much better with the parking lights on!

[A_DILLA]

Originally Posted by MLAZ1990

Np!!! It look much better with the parking lights on!

They look much better now, thx everyone

[A_DILLA]

Bam!