Tucson Camaro's

[slickmetal]

Hey all, just wanted to say it was nice seeing you all at the last meeting and some of you at the Cruise Ins! Feels good to be back! I've been busy with the aesthetic mods lately but now if I could only just get my car in at CPR for the new performance mods :(

The cruise to Flagstaff/GC is going to be awesome. Thing is, my mother/etc are coming to visit towards the end of September and lets hope they don't want to go to the GC!! Also it looks like I will be taking off the entire month of September from work (use or lose leave days...) Hope I am ok to take that Friday off if going.

I am planning to go to the the Old Tucson Studios car show...my Mom/etc should be ok to go (too bad the Studio is closed). I did pay for a VIP slot...how many others did? Will I not be able to park with you? Who else did VIP?

[Dirtdog]

I signed up for VIP also.

[FLYNNZL1]

Monthly Meeting:
7:00pm to 8:00pm the second Thursday of every month at different restaurants in the Tucson area, with plenty of Parking, no fees or dues. This is a good way to talk and share information, and make plans.
This month's meeting is at:

This month's meeting:
Hello everyone,
This month's meeting will be Thursday,September 10th, at Fuddruckers, 6118 E Speedway Blvd, Tucson, AZ 85712. We'll eat at 6PM, and discuss meeting notes right after
Hope to see you there!

Coming up:
CAR SHOW @ OLD TUCSON STUDIOS
Saturday, September 19 at 11:00am - 5:00pm
https://www.facebook.com/events/1566778123576550/

CAR-CON 2015
Saturday, Sep 26 at 10:00am to Sep 27 at 6:00pm
https://www.facebook.com/events/494924453993629/

Flagstaff-Grand Canyon-Sedona Cruise
We have a cruise planned October 2nd returning October 4th to Flagstaff-Grand Canyon-Sedona. Deadline for signing up is Friday September 25th, hotel will be booked at 6:00pm that night. We will stop at different points along the way for photo ops.
Go here for more information, click going if you are going:
https://www.facebook.com/events/1487973724834553/

SIR Schedule:
http://raceswir.com/schedule

[slickmetal]

Ok gang! I'm offering this to you all first before I advertise elsewhere! Ive hit my cap for spending and now need to sell somethings to get what I need more...Like a new heat exchanger...

With all the up coming fall car shows, why not add some special flare! I have a set of vertical/lambo dual mode hinges from Vertical Doors Inc.

http://www.verticaldoors.com/
http://www.verticaldoors.com/chevrolet_2010_camaro.html

Yes, they are used but still priced to save you a ton of $$ at $700 vs $1589 (1499 + 90 shipping) new . This is exactly what I paid shipped to me! They were previously professionally installed and professionally removed. Should be a simple DIY install/direct bolt on w/ removal of fenders - just watch the alignment.

Also for sale is a Carbon Fiber APR front splitter for ZL1. Looks to be brand new and never installed. Does not have the support rods/any hardware - Thus why only $200 vs $405 + shipping.

http://shop.aprperformance.com/index...product_id=306

Will have a AIRRAID MXP/Non-Oiled Cold Air Intake for ZL1 as well. $250
http://www.airaid.com/search/product.aspx?prod=251-308

Also have a SUB THUMP plug n play v3 wiring harness for Camaros equipped with Boston Acoustics Systems to use aftermarket amp etc. w/ ground loop isolator. Brand new, never installed/used. $50
http://********.com/product_info.php...roducts_id=204

[slickmetal]

Originally Posted by Flynnaz

Monthly Meeting:
7:00pm to 8:00pm the second Thursday of every month at different restaurants in the Tucson area, with plenty of Parking, no fees or dues. This is a good way to talk and share information, and make plans.
This month's meeting is at:

This month's meeting:
Hello everyone,
This month's meeting will be Thursday,September 10th, at Fuddruckers, 6118 E Speedway Blvd, Tucson, AZ 85712. We'll eat at 6PM, and discuss meeting notes right after
Hope to see you there!

Coming up:
CAR SHOW @ OLD TUCSON STUDIOS
Saturday, September 19 at 11:00am - 5:00pm
https://www.facebook.com/events/1566778123576550/

CAR-CON 2015
Saturday, Sep 26 at 10:00am to Sep 27 at 6:00pm
https://www.facebook.com/events/494924453993629/

Flagstaff-Grand Canyon-Sedona Cruise
We have a cruise planned October 2nd returning October 4th to Flagstaff-Grand Canyon-Sedona. Deadline for signing up is Friday September 25th, hotel will be booked at 6:00pm that night. We will stop at different points along the way for photo ops.
Go here for more information, click going if you are going:
https://www.facebook.com/events/1487973724834553/

SIR Schedule:
http://raceswir.com/schedule

If we go to this months meeting, it will be without the Z. It will be at CPR until 12th.

Also for the Old Tucson Car Show, when we arrive, folks who paid for VIP will need to go directly to the VIP line for photos. We have a few and I know OCD has a few too. Please save ample spots (as we are slated spots for clubs on reported numbers) for VIP folks to park when finished!

Also, SIR is no longer SIR. Its going to be Tucson Dragway as of 3 Sept. They appear to be closed until October.

tucsondragway.net
https://www.facebook.com/TucsonDragway

[FLYNNZL1]

Good to know. I am thinking about getting a quote from CPR for a supercharger and headers

[slickmetal]

Originally Posted by Flynnaz

Good to know. I am thinking about getting a quote from CPR for a supercharger and headers

NICE! Also check the post in the local market from urr2slo...he has just about a complete procharger setup for $3K!

CPR is doing LT headers, new plugs, FORE fuel system w/ dual pumps, E85 sensor, FIC 1000 injectors, extra coolant reservoir, Rotofab CAI, Rotofab Big Gulp Scoop, Rotofab WW relocator installs, install of my Moroso catch can, 11% lower pully and new lineloc. I was getting a 2.38 upper pully, but they informed me my S/C spindle was not turned down and they have no time for the labor :(

Hope some folks want some vertical doors so I can get my upgraded HX! Please pass the word!

[Joe@CPR.com]

Originally Posted by Flynnaz

Good to know. I am thinking about getting a quote from CPR for a supercharger and headers

Let me know sir! We are a magnuson, ecs, procharger, and Whipple dealer. Along with agp if you want a nice tt setup.

Sent from my SM-G920V using Tapatalk

[slickmetal]

Originally Posted by Joe@CPR.com

Let me know sir! We are a magnuson, ecs, procharger, and Whipple dealer. Along with agp if you want a nice tt setup.

Sent from my SM-G920V using Tapatalk

Get 'em set up Joe!

[FLYNNZL1]

We have a cruise planned October 2nd returning October 4th to Flagstaff-Grand Canyon-Sedona. Deadline for signing up is Friday September 25th, hotel will be booked at 6:00pm that night. We will stop at different points along the way for photo ops. This is the itinerary:
Friday October 2nd
12:30 Meet at Quik Trip at Cortaro and I10 (Gas Up) Meet up with Sierra Vista people.
1:00 Leave Quik Trip, I10
3:00 Arrive at Circle K at Daisy Mountain Rd, Anthem, AZ (North of Phoenix) (Need to Gas Up!, Bathroom Break, Snack) Meet up with Phoenix people.
3:30 Leave for Flagstaff, I17
5:15 Arrive at Super 8 at 3725 Kasper Drive, Flagstaff, AZ, 86004 (if you choose to stay there, we will have a discounted rate at $101.00 + tax) This is parent's weekend at NAU so this is a great rate Steve Willis was able to secure, please confirm with me by the 23rd of September if you are staying there.
6:30 Dinner at Freddy's Steak Burgers for Cruise in.
Saturday October 3rd
Breakfast on your own (Hotel has small breakfast setup, Cereal, Bagels, Juice, Fruit)
8:30 Leave to Grand Canyon, Hwy 180 Scenic Route
10:00 Enter Grand Canyon $25.00 per car
3:00 Leave Grand Canyon, Hwy 180 Scenic Route
4:30-5:00 Arrive at Hotel
7:00 Dinner at Galaxy Diner http://jbsfamily.com/galaxy-diner/.
Sunday October 4th
7:30 Hotel Check Out
8:00 Leave to Ihop for Breakfast
9:30 Leave to Sedona, 89A
11:00 Arrive in Sodona, (shopping, pictures, lunch)
1:00 Leave for Tucson, 179 to 17
5:00 Arrive Tucson

Hotel link:
http://www.super8.com/hotels/arizona...n_date&rooms=1

[slickmetal]

is it 101+ tax per night or for both nights?

[FLYNNZL1]

No, per night

[jasycz28]

Originally Posted by Flynnaz

Good to know. I am thinking about getting a quote from CPR for a supercharger and headers

FYI....I am going to have my Whipple and LG headers for sale shortly.

[FLYNNZL1]

Originally Posted by jasycz28

FYI....I am going to have my Whipple and LG headers for sale shortly.

I'm not sure it will work, I have a 2013 Manual, when I liked it up it showed me a different model for mine.