Foot well LED HELP please!! - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ThunderSS · 11-18-2009, 10:14 PM

Quote:

Originally Posted by klatterblast

your right, dont know what i was thinking.

Same thing I was when I first read the thread.

TJ91 · 11-18-2009, 10:49 PM

i got the installer turned good friend from futureshop to put them in for me, free of charge.

markmass · 11-19-2009, 03:30 PM

I guess no-one has found the wire anywhere near the footwell that controls the dome light?
I Just ordered the LEDs for the dome light, and footwell lighting from AAC. I too would like to wire them to go on/off with the dome light - in fact I will put a 3 way switch so i can switch on when i want them - anyway slight digression. I am also putting up the Escort detector - so i think i will run a hot wire from the dome light down to the footwell while I'm channeling the detector cords - hopefully through the headliner to the side posts then down. Anyone tell me which wire it is in the dome light i need to tap into before I get my meter out?

Thanks

TonyNo · 11-19-2009, 07:17 PM

...and how to pull the a-pillar covering? ;-)

Camaro1* · 08-19-2011, 06:34 AM

Under the dash by the steering wheel you will see a block of wires. There is a grey block of wires, unplug that block and use a t splitter and splice your power wires to the grey wire and plug the block back in. Ground your ground wires and there you have it. They will work with your dome light. I just did mine about three weeks ago.

nyrfan · 08-19-2011, 06:43 AM

Quote:

Originally Posted by Camaro1*

Under the dash by the steering wheel you will see a block of wires. There is a grey block of wires, unplug that block and use a t splitter and splice your power wires to the grey wire and plug the block back in. Ground your ground wires and there you have it. They will work with your dome light. I just did mine about three weeks ago.

Holy cow, you brought up a thread is from 2009. My guess is the OP got this resolved, or at least I hope so

St33lsinger · 08-19-2011, 07:20 AM

And Tony already wrote up a DYI on it. With GOOD pics.

The Stig · 08-19-2011, 07:22 AM

hahaha necrothreads

08-19-2011, 07:20 AM	#21
St33lsinger Emerald Coast Camaros Drives: 2010 1 RS/SS Join Date: Jun 2009 Location: Florida Posts: 1,095 View My Garage	And Tony already wrote up a DYI on it. With GOOD pics. __________________ Had: 69' RS, 78' Z28, 98' SS Have: 2010 1RS/SS

08-19-2011, 07:22 AM	#22
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	hahaha necrothreads __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LED Interior Replacement Lights For Your 2010 Camaro	Vizualize	Interior Parts & Accessories	36	02-24-2010 06:57 PM
UT Camaro's LED underbody kit	chrisgalles	Camaro Photos \| Spyshots \| Video \| Media Gallery	32	09-11-2009 07:26 AM
How smart is your right foot?	tjbusa	Off-topic Discussions	13	03-25-2009 10:29 PM

11-18-2009, 10:49 PM	#16
TJ91 :chevy: Drives: 2LT/RS Join Date: Jun 2008 Location: Toronto Posts: 13,033	i got the installer turned good friend from futureshop to put them in for me, free of charge.

11-19-2009, 03:30 PM	#17
markmass TRI-COUNTY CAMAROS Drives: 2SS/RS Oct 2009 Join Date: Oct 2009 Location: Coral Springs Florida Posts: 448 View My Garage	I guess no-one has found the wire anywhere near the footwell that controls the dome light? I Just ordered the LEDs for the dome light, and footwell lighting from AAC. I too would like to wire them to go on/off with the dome light - in fact I will put a 3 way switch so i can switch on when i want them - anyway slight digression. I am also putting up the Escort detector - so i think i will run a hot wire from the dome light down to the footwell while I'm channeling the detector cords - hopefully through the headliner to the side posts then down. Anyone tell me which wire it is in the dome light i need to tap into before I get my meter out? Thanks

11-19-2009, 07:17 PM	#18
TonyNo Drives: 2016 2SS, SW Join Date: Oct 2009 Location: Chicago Suburbs Posts: 1,079	...and how to pull the a-pillar covering? ;-)

08-19-2011, 06:34 AM	#19
Camaro1* Drives: 2011Black Camaro 1 LT RS Join Date: Aug 2011 Location: Ohio Posts: 150 View My Garage	Under the dash by the steering wheel you will see a block of wires. There is a grey block of wires, unplug that block and use a t splitter and splice your power wires to the grey wire and plug the block back in. Ground your ground wires and there you have it. They will work with your dome light. I just did mine about three weeks ago.