Dont hate the Shelby - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Barton Industries · 07-31-2012, 05:02 PM

Hey Everyone,
We will be attending Camaro5fest once again. We didn't know for sure if we were going to make it or not, but we will be there.
We will have our BARTON short throw shifters there along with our pistol grip knobs. My 2010 Camaro will be open at our booth for anyone to hop in and try out the shifter.
I will also have my 2013 Shelby GT500 there, but don't hate.

I needed another car to haul stuff down with. Last year at Mustang Week, I brought my Camaro for the same reason.

See everyone in a couple days,
Dave

Dznts · 07-31-2012, 05:27 PM

Can't wait to see that Shelby!

M Miller69 · 07-31-2012, 05:33 PM

A SHELBY AT CAMAROFEST!!!!!!!!!!!.

LOL. just kidding, even the Mustang haters, deep inside will have to admit the is Shelby is an awesome car.

*Mindz* · 07-31-2012, 06:25 PM

Both cars look sleek and aggressive. I didn't get to meet you guys last year because you parked both cars way away from everyone off in a corner. I'll make sure I'm come say hello this year.

PQ · 07-31-2012, 06:26 PM

Are you guys planning on running the Shelby on the strip?

rocketman 12 · 07-31-2012, 06:38 PM

Quote:

Originally Posted by Dznts

Can't wait to see that Shelby!

Ditto, Shelby's ROCK!

Quote:

Originally Posted by PQ

Are you guys planning on running the Shelby on the strip?

please, please, please!

skar · 07-31-2012, 06:42 PM

? Do the Barton's have a nylon or ? For a bushing . Do they get sloppy with use like the other brand.

xSSkier874 · 07-31-2012, 09:07 PM

Quote:

Originally Posted by skar

? Do the Barton's have a nylon or ? For a bushing . Do they get sloppy with use like the other brand.

I have one of their shifters from the original pre-order, it's as smooth as the day I put it in about 2 1/2 years ago. They sell quality stuff and at an awesome price.

Deke736 · 07-31-2012, 09:22 PM

Quote:

Originally Posted by PQ

Are you guys planning on running the Shelby on the strip?

That would be awesome!

Earthshaker6 · 07-31-2012, 09:32 PM

Quote:

Originally Posted by Barton Industries

I will also have my 2013 Shelby GT500 there, but don't hate.

See everyone in a couple days,
Dave

Who's hating? Not I!

Barton Industries · 08-01-2012, 07:48 AM

We should be getting in sometime tonight or 1st thing tomorrow. I have an 11.5 hour drive and I'm still assembling shifters.

Skar- We use PTFE for the bushings, but the other brand does not have a problem with the Material they use, it's that they don't have enough wall thickness and they groove the face which makes them very prone to wear.

I wish I could run it at the strip, but Im to far from home to risk something happening. At least with the Camaros you will be able to get parts at the show if you break. I would be out of luck.

Thanks for the positive comments guys, I feel a little better about it.

khislop007 · 08-01-2012, 08:00 AM

Quote:

Originally Posted by Barton Industries

We should be getting in sometime tonight or 1st thing tomorrow. I have an 11.5 hour drive and I'm still assembling shifters.

Skar- We use PTFE for the bushings, but the other brand does not have a problem with the Material they use, it's that they don't have enough wall thickness and they groove the face which makes them very prone to wear.

I wish I could run it at the strip, but Im to far from home to risk something happening. At least with the Camaros you will be able to get parts at the show if you break. I would be out of luck.

Thanks for the positive comments guys, I feel a little better about it.

Oh man, no faith in the FORD!?

Just kidding!

I already have your shifter but I may pick up just the flat stick.

RADREVX · 08-01-2012, 08:17 AM

Shelby is a kick ass car

AdamZ · 08-01-2012, 03:59 PM

07-31-2012, 05:02 PM	#1
Barton Industries Drives: 2010 Camaro SS Join Date: Sep 2009 Location: Cortland NY Posts: 437	Dont hate the Shelby Hey Everyone, We will be attending Camaro5fest once again. We didn't know for sure if we were going to make it or not, but we will be there. We will have our BARTON short throw shifters there along with our pistol grip knobs. My 2010 Camaro will be open at our booth for anyone to hop in and try out the shifter. I will also have my 2013 Shelby GT500 there, but don't hate. I needed another car to haul stuff down with. Last year at Mustang Week, I brought my Camaro for the same reason. See everyone in a couple days, Dave

07-31-2012, 05:27 PM	#2
Dznts Anabolic Connoisseur Drives: Sold - Blown Camaro 2SS/RS LS3 Join Date: Sep 2010 Location: Oklahoma Posts: 22,094	Can't wait to see that Shelby! __________________

07-31-2012, 05:33 PM	#3
M Miller69 Drives: 2010 Camaro 2SS Join Date: Feb 2011 Location: Iola,Wisconsin Posts: 434 View My Garage	A SHELBY AT CAMAROFEST!!!!!!!!!!!. LOL. just kidding, even the Mustang haters, deep inside will have to admit the is Shelby is an awesome car. __________________ RED 10' 2SS MPD1 Hood MPD1 spoiler SS front splitter SW lt Headers VMaxx porteds TB JRE 93 octane tune

07-31-2012, 06:25 PM	#4
Mindz E.B.A.H. Drives: you wild... Join Date: Mar 2007 Location: In the happy padded room wearing a jacket that makes me hug myself... Posts: 18,421	Both cars look sleek and aggressive. I didn't get to meet you guys last year because you parked both cars way away from everyone off in a corner. I'll make sure I'm come say hello this year. __________________ Blue Rush, 2010 SS [Car of the Week 3/22/2010] Traded in on...ZLZBUBB, 2013 ZL1

07-31-2012, 06:26 PM	#5
PQ Booooosted. Drives: 2010 Supercharged SS Join Date: Apr 2008 Location: Mobile, AL Posts: 36,716 View My Garage	Are you guys planning on running the Shelby on the strip? __________________

07-31-2012, 06:42 PM	#7
skar Drives: 2010 2SSRS headers/CAI/tune/corsa, Join Date: May 2010 Location: Commerce twp Michigan Posts: 1,413	? Do the Barton's have a nylon or ? For a bushing . Do they get sloppy with use like the other brand. __________________ Stainless works headers/cats Roto fab CAI / Corsa install and tune Livernois TSW Nuburgring 9 &10" x 20 on Invos (315 & 275 ) JL Audio XD400/4 amp Pfadt trailing arms & tie rods sway bars. pedders street 1 package. ,Hurst short throw shifter With bronze bushings .

08-01-2012, 07:48 AM	#11
Barton Industries Drives: 2010 Camaro SS Join Date: Sep 2009 Location: Cortland NY Posts: 437	We should be getting in sometime tonight or 1st thing tomorrow. I have an 11.5 hour drive and I'm still assembling shifters. Skar- We use PTFE for the bushings, but the other brand does not have a problem with the Material they use, it's that they don't have enough wall thickness and they groove the face which makes them very prone to wear. I wish I could run it at the strip, but Im to far from home to risk something happening. At least with the Camaros you will be able to get parts at the show if you break. I would be out of luck. Thanks for the positive comments guys, I feel a little better about it.

08-01-2012, 08:17 AM	#13
RADREVX Drives: 2012 SS Join Date: May 2012 Location: FAIRPORT NY Posts: 286	Shelby is a kick ass car

08-01-2012, 03:59 PM	#14
AdamZ Account Suspended Drives: Eve - 2011 Camaro 2SS/RS Join Date: Apr 2012 Location: Fairfield, OH Posts: 11,815