What tuning Software do you use?? - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Motion427 · 08-18-2012, 09:49 AM

I use HPtuners for my 04 and my 06.
As for the Camaro,the only thing,it's to tune the VE table.Trying to figure it out now.Haven't had to much time to work on it.Hopefully I'll figure it out.I did hear the EFI live gives you a table to you can tune the VE table,while HPtuners you have to use a second program,and a some other little things to tune the VE.

Higgs Boson · 08-18-2012, 10:01 AM

it's a virtual ve table. you don't need to use the conversion program, you can upgrade to a custom os and it gives you a normal ve table plus a bunch of other cool features.

RickRay · 08-18-2012, 10:02 AM

Check out IPF Tuning...http://www.ipf-tuning.com/

Jayrcr3 · 08-18-2012, 10:08 AM

Quote:

Originally Posted by Higgs Boson

it's a virtual ve table. you don't need to use the conversion program, you can upgrade to a custom os and it gives you a normal ve table plus a bunch of other cool features.

No need to upgrade to a custom op system. The VVE table is available as is.

Sent from my HTC One X using Tapatalk 2

Higgs Boson · 08-18-2012, 12:20 PM

Quote:

Originally Posted by Jayrcr3

No need to upgrade to a custom op system. The VVE table is available as is.

Sent from my HTC One X using Tapatalk 2

Lol, I suspect you did not read my post. I never said the vve wasn't available.... I said a custom os will give a normal ve table right in the tune.

Motion427 · 08-19-2012, 05:09 PM

Quote:

Originally Posted by Jayrcr3

No need to upgrade to a custom op system. The VVE table is available as is.

Sent from my HTC One X using Tapatalk 2

I updated my HPtuners this week,as far as I know,I haven't seen it.
If somebody would want to point me in the right direction it would make it alot easier for me for sure.........

Motion427 · 08-19-2012, 05:21 PM

I have 2.23.772 software.

By any chance,the only OS upgrade that I see in my software is the 2 bar map SD.It would make sense that is what you are talking about,right?

Iam Broke · 08-19-2012, 06:32 PM

HP Tuners for 3 years now. Just upgraded to the Pro for the LS3 tuning. My other cars had wideband 02's already.

Higgs Boson · 08-19-2012, 10:02 PM

Quote:

Originally Posted by Motion427

I have 2.23.772 software.

By any chance,the only OS upgrade that I see in my software is the 2 bar map SD.It would make sense that is what you are talking about,right?

yes it is called a 2 bar map sd but you can run it like stock, with the maf, hybrid, just ve table (sd), 1 bar, 2 bar, whatever you want.

in fact, it just became available for the 2012 within the last couple days and I now have a working ve table!

Motion427 · 08-20-2012, 05:46 AM

Let say the car is pretty stock. You would use Bluecat software to create the VE,and transfer the # to the OS upgrade.Noticed that Bluecat makes it as 4 digit numbers,but at different RPM's and KPA. I'm guessing you just fill the blanks.
I'm running a 2-bar map in my Supercharged AV.
I just wanted to learn how to do it in my Camaro aswell. Just in case. lol...

Iam Broke · 08-20-2012, 07:30 AM

Quote:

Originally Posted by Higgs Boson

yes it is called a 2 bar map sd but you can run it like stock, with the maf, hybrid, just ve table (sd), 1 bar, 2 bar, whatever you want.

in fact, it just became available for the 2012 within the last couple days and I now have a working ve table!

Interesting... Might have to look into this when I get disgusted with MAF tuning.

Higgs Boson · 08-20-2012, 07:47 AM

Quote:

Originally Posted by Motion427

Let say the car is pretty stock. You would use Bluecat software to create the VE,and transfer the # to the OS upgrade.Noticed that Bluecat makes it as 4 digit numbers,but at different RPM's and KPA. I'm guessing you just fill the blanks.
I'm running a 2-bar map in my Supercharged AV.
I just wanted to learn how to do it in my Camaro aswell. Just in case. lol...

or you can use the custom OS and don't need bluecat software.

you tune it like it's 1999, lol! actually more like 2004.....

there are also several other features, not to mention you are good to go on the car from bone stock all the way to giant cam and/or nitrous and/or FI...

Motion427 · 08-20-2012, 05:00 PM

I know when I ugraded my AV to a 2 bar setup,I had to copy/paste the curent VE table,and fill out the extra empty spaces(over 105KPA).

On the Camaro,the custom OS only goes to 175KPA. :(
Might be a stupid question,
I'm guessing I still have to use bluecat to create a VE table so that I can copy/paste to the custom OS for the car to start.Because when I open the custom OP,the VE is showing 0 all over the board.

Higgs Boson · 08-20-2012, 07:08 PM

Quote:

Originally Posted by Motion427

I know when I ugraded my AV to a 2 bar setup,I had to copy/paste the curent VE table,and fill out the extra empty spaces(over 105KPA).

On the Camaro,the custom OS only goes to 175KPA. :(
Might be a stupid question,
I'm guessing I still have to use bluecat to create a VE table so that I can copy/paste to the custom OS for the car to start.Because when I open the custom OP,the VE is showing 0 all over the board.

it is zeros, just populate it with an 05 vette ve if that's easier.

also, withi the GenIVs you can click the table column and row titles and rescale them.

View Poll Results: What tuning software do you use?
EFILive Scan and Tune V2	6	9.23%
HPTuners	33	50.77%
SCT	16	24.62%
Other	14	21.54%
Multiple Choice Poll. Voters: 65. You may not vote on this poll

08-18-2012, 10:02 AM	#17
RickRay INJACC Drives: 2010 CGM 2LT/RS AUTO Join Date: Jan 2009 Location: Montreal (South Shore)Quebec, Canada Posts: 6,518 View My Garage	Check out IPF Tuning...http://www.ipf-tuning.com/ __________________ *Member of 'Club Elite' #70* 2LT/RS Auto / Solo HFC / Solo Mach X-LLT J-Pipe / JBA Headers Shorty CAI - Cold Air Inductions / VMAX TB / Trifecta Tune Hotchkis Max Strut Brace / Blade Dovetail Spoiler / Elite Catch Can ACS T3 Hood Ports / T2 Bumper Ports / T2 Splitter / ACS T1 Led Light Kit ACS Rockers / ACS Composite Hood Liner / ACS Upper Rear Quarter Ports ACS Front Wheel Mud Flaps / ACS Rear Wheel Mud Flaps / Vitesse Throttle Controller Pedders Drop Suspension / BMR Lower Control Arms / Style 41 ZL1 Wheels / Oracle Afterburners / Oracle Concept SMD Side markers Complete SS Brembo Brakes Set

08-19-2012, 05:21 PM	#21
Motion427 Account Suspended Drives: 2010 2SS/RS Red Jewel L99 Join Date: Jun 2011 Location: NB,Canada Posts: 834	I have 2.23.772 software. By any chance,the only OS upgrade that I see in my software is the 2 bar map SD.It would make sense that is what you are talking about,right? Last edited by Motion427; 08-19-2012 at 05:33 PM.

08-19-2012, 06:32 PM	#22
Iam Broke PHAT B33 Drives: 2012 TF3 Camaro 2SS/RS M6 Join Date: Jun 2012 Location: Dark of the Moon Posts: 1,460 View My Garage	HP Tuners for 3 years now. Just upgraded to the Pro for the LS3 tuning. My other cars had wideband 02's already. __________________ Another 1 of 371 '12 T3 LS3 M6's built.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom Tuning by Trifecta and NALLEN Engineering	nallen00	V8 Bolt-Ons & Tunes	19	02-06-2010 10:32 AM
Tuning Software	7hogs	Tuning / Diagnostics -- engine and transmission	2	10-03-2009 10:15 AM
New flash tuner - ?old to 'Stang - new to 'Maro?	radz28	Tuning / Diagnostics -- engine and transmission	0	08-26-2009 01:10 PM
Tuning software for LS3	perfxn	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	38	11-26-2008 12:59 AM

08-18-2012, 09:49 AM	#15
Motion427 Account Suspended Drives: 2010 2SS/RS Red Jewel L99 Join Date: Jun 2011 Location: NB,Canada Posts: 834	I use HPtuners for my 04 and my 06. As for the Camaro,the only thing,it's to tune the VE table.Trying to figure it out now.Haven't had to much time to work on it.Hopefully I'll figure it out.I did hear the EFI live gives you a table to you can tune the VE table,while HPtuners you have to use a second program,and a some other little things to tune the VE.

08-18-2012, 10:01 AM	#16
Higgs Boson Perpetual Order Drives: indeed Join Date: Jun 2012 Location: Texas Hill Country Posts: 1,277	it's a virtual ve table. you don't need to use the conversion program, you can upgrade to a custom os and it gives you a normal ve table plus a bunch of other cool features.

08-20-2012, 05:46 AM	#24
Motion427 Account Suspended Drives: 2010 2SS/RS Red Jewel L99 Join Date: Jun 2011 Location: NB,Canada Posts: 834	Let say the car is pretty stock. You would use Bluecat software to create the VE,and transfer the # to the OS upgrade.Noticed that Bluecat makes it as 4 digit numbers,but at different RPM's and KPA. I'm guessing you just fill the blanks. I'm running a 2-bar map in my Supercharged AV. I just wanted to learn how to do it in my Camaro aswell. Just in case. lol...

08-20-2012, 05:00 PM	#27
Motion427 Account Suspended Drives: 2010 2SS/RS Red Jewel L99 Join Date: Jun 2011 Location: NB,Canada Posts: 834	I know when I ugraded my AV to a 2 bar setup,I had to copy/paste the curent VE table,and fill out the extra empty spaces(over 105KPA). On the Camaro,the custom OS only goes to 175KPA. :( Might be a stupid question, I'm guessing I still have to use bluecat to create a VE table so that I can copy/paste to the custom OS for the car to start.Because when I open the custom OP,the VE is showing 0 all over the board.