AAC Colorshift 2.0 LED halos!

[rareslick]

Originally Posted by brengeek

Well we are having an issue with the sensor box right now ..working on a solution but he put it on the dash right behind the theft control light in that chunk of removable grill.

How did it reach from the center console to the dash(center console u mean glove box under arm rest) or where 4pack auxiliary gauges are on an 2ss or Lt2

[brengeek]

Originally Posted by rareslick

How did it reach from the center console to the dash(center console u mean glove box under arm rest) or where 4pack auxiliary gauges are on an 2ss or Lt2

I'll have to let him chime in on this as I wasn't watching the wiring install. It's in the center console glove box you rest your arm on, yes

[rareslick]

Originally Posted by brengeek

I'll have to let him chime in on this as I wasn't watching the wiring install. It's in the center console glove box you rest your arm on, yes

Ok thanks

[brengeek]

I will be happy to take pics whenever he brings the car home - it is HIS daily driver. I am thinking I need one of my own!!

[camaro2lt]

take pics please!

[rareslick]

Originally Posted by camaro2lt

take pics please!

+1

[Msltech]

We installed the controller box in the center console.



Installed the sensor in the defroster vent grill behind the theft prevention light. Took one little drill hole in the center solid section. The wiring reached the center console. I snaked the wire through by opening the glove box and reaching up underneath and pulling the wire through.





My son is always willing to "HELP" !!




This is an installed terminal board under the console center trim on the passenger side. The purpose of this is to connect the halos/footwell lighting to the terminal board to make changing any wiring easier.




THis is my terminal board in the engine compartment for the halos. Serves same purpose as the other one. Used 16/4 AWG wiring to connect terminal boards to control box.







This shows the routing of the wiring from the engine compartment to the interior of the car through the door post.




And..that's it!

[FRKNlo]

Great idea on the TB's.
Do have info on which silicone to use?

[Msltech]

Liquid Nails Clear Small Projects Silicone Adhesive (LN-207) from Home Depot and velcro to attach the TBs.

[Support@OracleLights.com]

Originally Posted by brengeek

Well we are having an issue with the sensor box right now ..working on a solution but he put it on the dash right behind the theft control light in that chunk of removable grill.

I played around with one of the remotes here and as long as the remote is seeing the "eye" dead on it works every time. If the remote is not hitting the eye dead on it has trouble reading the signal.

[rareslick]

Originally Posted by Jonathan@AACstyle.com

I played around with one of the remotes here and as long as the remote is seeing the "eye" dead on it works every time. If the remote is not hitting the eye dead on it has trouble reading the signal.

is it possible to add jack splitter to the remote box and add another infrared sensor. to have two sensors into different locations

[rareslick]

Originally Posted by AACstyle

I have a dual infrared senor (standard home threatre from Best Buy or similar) I will try it out and let you know the results

Thanks!

[Shuffler]

Originally Posted by rareslick

How many bolts and screws are there in each side after taking the wheel well liner

Here is AAC's DIY video they made while removing the front clip on my Daughter's Synergy....

[rareslick]

Originally Posted by AACstyle

Its at my house so I will not be able to tell you the results until tomorrow.

Ok, will something like this work?
http://cgi.ebay.com/Choice-Select-Du...#ht_1235wt_443