04-05-2012, 10:38 AM | #1 |
one car wolfpack
Drives: 2010 Camaro V6 Join Date: Nov 2010
Location: Illinois
Posts: 1,226
|
what to do now
i bought a pc for the 89 dollar price.
now what? what backing plate should i buy? example? What pads will i need? As much as id like to try adams i dont have the money to spend on it. would over the counter polishes work fine. what color pads for each step?? |
04-05-2012, 11:44 AM | #2 |
The enjoyment never ends
Drives: 2010 1LT/RS IOM #25223 Join Date: May 2009
Location: NKY
Posts: 1,086
|
Okay. This is my opinions. Take it as you will. Backing plate-
http://www.detailersdomain.com/Megui...7DA_p_586.html Get the 5" backing plate. Not the 6". 5" is better correcting for the PC. Pads- http://www.detailersdomain.com/5-Pac...nch_p_297.html In that kit, get 2 yellow pads, 2 Green pads, and 1 black pad. You'll thank me later for the two pads of those colors. Polishes and Compounds- You can go OTC with Meg's Ultimate Polish and Ultimate Compound, but they won't get your car perfect. They will get it pretty darn near though. If you want to reach perfection, you should go for these 2 products here. http://www.detailersdomain.com/Menze...int_p_218.html http://www.detailersdomain.com/Menze...int_p_134.html Now that you have your paint corrected properly, you're gonna want to seal it in with a good wax or sealant. If you're wanting to order from the same place, I would go with this. http://www.detailersdomain.com/1Z-ei...-Wax_p_72.html So either way, Adam's prices aren't that bad when you look at what you get. Have I used their polishes and sealant? No. I have their Fine Machine Polish and Machine Super Sealant that I will be using very soon as soon as the pads get here. I have used what I have offered you and they are a great combo, but they too are expensive. Don't forget to use the forum code for 10% off. |
04-05-2012, 12:02 PM | #3 |
one car wolfpack
Drives: 2010 Camaro V6 Join Date: Nov 2010
Location: Illinois
Posts: 1,226
|
Thanks man. This is exactly the info I was looking for. I looked all over the internet for this but couldn't find nothing.
Good luck with your detailing business bro! |
04-05-2012, 12:03 PM | #4 |
The enjoyment never ends
Drives: 2010 1LT/RS IOM #25223 Join Date: May 2009
Location: NKY
Posts: 1,086
|
Thanks! It's getting closer and closer to being time to open it. May 4th is my last day for exams. I can't wait.
|
|
|
Thread Tools | |
|
|