07-01-2013, 01:36 PM | #1 |
Carbon fiber vinyl ideas w/ pictures.
looking for some ideas. i already did my bow tie and im gonna do my side reflector but leave like a 1/4 inch so its not ilegal and it looks cooler. and other ideas?
was gonna do panals inside doors but i have ls 2011 so its hard to make it stick
__________________
|
|
07-01-2013, 07:11 PM | #2 |
Russ
|
I want to do inside door panels and was hoping someone had a template of the door panel. I'm not going to take the panels off because they are a royal pain in the a$$ to put back on. I never heard anyone having a problem with the vinyl sticking to the door panels, where did you hear this from?
Russ |
07-01-2013, 07:31 PM | #3 |
Retired from Car mfrs....
Drives: 2LT RS/HR-V Join Date: May 2013
Location: /Fort Lauderdale
Posts: 10,048
|
|
07-01-2013, 08:54 PM | #4 |
how did you do that? take all of it apart?
__________________
|
|
07-01-2013, 08:59 PM | #5 |
ZL1 Nut
Drives: 10 SS/RS;12 ZL1;17ZL1;22ZL1;24ZL1 Join Date: Sep 2009
Location: nc
Posts: 286
|
2012 ZL1 #1883
Here's some pics of mine
|
07-03-2013, 09:53 PM | #6 |
instigator
Drives: 2020 6.2 Trail Boss, 2022 XC90 Join Date: Jan 2010
Location: 72034
Posts: 3,979
|
I was debating on wrapping a vfn Sunoco hood in it...1le look, but easier maint.
__________________
-John S.
|
07-03-2013, 09:56 PM | #7 |
07-04-2013, 07:13 AM | #8 |
Drives: 2013 Camaro Ls Join Date: Nov 2012
Location: United States
Posts: 75
|
Dash and door panels
|
07-05-2013, 08:58 PM | #9 |
Drives: Company Car Join Date: Sep 2009
Location: headlightarmor.com
Posts: 3,535
|
Some nice ideas, and done photos!
When installing wrap - especially on the interior it is critical to be sure the surface is very very clean. Also as it is summer it you are not going to remove a piece to be wrapped most mfg's want the piece to be and stay below 75-78 degrees f for 24 hours. The adhesive has a stronger bond after 24 hours. |
|
|
|
|