Need HELP setting up AEM Widebands AFR's in HP Tuners - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

John_C · 07-09-2017, 01:20 PM

OK folks, help me out here. I need help setting up two AEM Widebands AFR's in HP Tuners.

I have two of these that are supposed to be plug and play pretty much:

http://www.aemelectronics.com/?q=pro...nd-uego-OBDII#

I did everything in this video:

https://youtu.be/ozJz-pNFCuo

But it would only detect 1 sensor out of the two. When I saved that sensor, no gauges show the data.

To top it off, when I saved that one sensor, I lost all my channels and custom graphs like LTFT+STFT, etc.

Thanks.

John_C · 07-09-2017, 01:25 PM

My setup at the moment is this. Welded in 2 bungs and added the widebands:

QUICRNU · 07-09-2017, 02:46 PM

I know you have to set the 2nd gauge to 7 and then OBDII to 2...seems strange it wouldnt recognize it. Maybe try a different #

In HPtuners you did the drop down while car was on for REpolling channels?

UNRIVALED SS · 07-09-2017, 08:51 PM

There is only one O2 sensor in the picture. Do you have you leave one out of the picture?

John_C · 07-10-2017, 03:34 AM

Quote:

Originally Posted by QUICRNU

I know you have to set the 2nd gauge to 7 and then OBDII to 2...seems strange it wouldnt recognize it. Maybe try a different #

In HPtuners you did the drop down while car was on for REpolling channels?

What drop down are you speaking of and how to setup 2nd sensor as #7?

I did what the video said:

Connect
Re-pull for supported parameters
Add channels
Search for WB EQ
Clicked the 12 yadda yadda under the 1 sensor that picks up
Then right-clicked on sensor in channels
Setup for 14.7:1 (Gas)
Setup for 10ms (100Hrtz)

John_C · 07-10-2017, 03:35 AM

Quote:

Originally Posted by UNRIVALED SS

There is only one O2 sensor in the picture. Do you have you leave one out of the picture?

Look again. I only opened 1 of 2 boxes.

07-09-2017, 01:20 PM	#1
John_C LSx FTW!!! Drives: 2010 Camaro 2SS RS Join Date: Jan 2017 Location: TN Posts: 767	Need HELP setting up AEM Widebands AFR's in HP Tuners OK folks, help me out here. I need help setting up two AEM Widebands AFR's in HP Tuners. I have two of these that are supposed to be plug and play pretty much: http://www.aemelectronics.com/?q=pro...nd-uego-OBDII# I did everything in this video: https://youtu.be/ozJz-pNFCuo But it would only detect 1 sensor out of the two. When I saved that sensor, no gauges show the data. To top it off, when I saved that one sensor, I lost all my channels and custom graphs like LTFT+STFT, etc. Thanks. __________________ 2010 2SS RS A6 781rwhp on E85 Stage 2 ProCharger D1X Circle D 3400 Triple Disc Kooks Jet Hot Headers Kooks Full 3in exhaust Trick Flow GenX 255's Polished PAC .660's & Ti-retainers TSP VVT 3.2 cam kit w/DoD Delete Smith Bro's Trunnion kit AEM X-Series OBDII Widebands FIC ID1300x Injectors GM ZL1 High Output Fuel Pump DSX Tuning Flex Sensor DSX Auxiliary Fuel System Tim King Stage 4 Max Effort CTSV 6L90 DSS 1 piece aluminum driveshaft JRE 6L80E / 6L90E Dipstick NGK Iridium IX spark plugs #7 heat range Mighty Mouse Camaro 5 Wild w/-12an and Billet Black HP Tuners VCM Suite

07-09-2017, 01:25 PM	#2
John_C LSx FTW!!! Drives: 2010 Camaro 2SS RS Join Date: Jan 2017 Location: TN Posts: 767	My setup at the moment is this. Welded in 2 bungs and added the widebands: __________________ 2010 2SS RS A6 781rwhp on E85 Stage 2 ProCharger D1X Circle D 3400 Triple Disc Kooks Jet Hot Headers Kooks Full 3in exhaust Trick Flow GenX 255's Polished PAC .660's & Ti-retainers TSP VVT 3.2 cam kit w/DoD Delete Smith Bro's Trunnion kit AEM X-Series OBDII Widebands FIC ID1300x Injectors GM ZL1 High Output Fuel Pump DSX Tuning Flex Sensor DSX Auxiliary Fuel System Tim King Stage 4 Max Effort CTSV 6L90 DSS 1 piece aluminum driveshaft JRE 6L80E / 6L90E Dipstick NGK Iridium IX spark plugs #7 heat range Mighty Mouse Camaro 5 Wild w/-12an and Billet Black HP Tuners VCM Suite

07-09-2017, 02:46 PM	#3
QUICRNU Drives: Z06 wannabe Join Date: Feb 2015 Location: Daytona Beach, FL Posts: 1,200	I know you have to set the 2nd gauge to 7 and then OBDII to 2...seems strange it wouldnt recognize it. Maybe try a different # In HPtuners you did the drop down while car was on for REpolling channels? __________________ Apex Focused

07-09-2017, 08:51 PM	#4
UNRIVALED SS Drives: 2010 Camaro SS Join Date: Aug 2010 Location: El Paso Posts: 704 View My Garage	There is only one O2 sensor in the picture. Do you have you leave one out of the picture?