You are browsing camaro5 
 |
|
03-01-2015, 07:37 AM
|
#1 |
 
Drives: 2013 1LE Join Date: May 2013
Location: NJ
Posts: 685
|
-6 or -8 fuel hose?
I'm looking to buy a fuel rail kit and see some use # 6 an or # 8 an hose. What size should I be looking to buy? I'm making 740 rwhp right now, and may go up in the future. Running a ZL1 pump & stock lines at the moment. Thanks.
|
|
|
|
03-01-2015, 11:04 AM
|
#2 |
    
Drives: 14 1LE Join Date: Mar 2013
Location: Spokane, WA
Posts: 1,567
|
-8 if your planning on doing more
__________________
LMS Engineering
|
|
|
|
|
03-01-2015, 12:36 PM
|
#3 |
|
Not necessarily. This is what I was told by Andy; PTFE lines flow better than a standard line. The PTFE -6 is supposed to flow almost as good as the -8 standard and they don't permeate the smell of gasoline.
I told him I want to be able to provide enough fuel for 1000 hp or more and he still recommended the -6 PTFE. Take this for what it's worth.
__________________
 |
|
|
|
|
03-01-2015, 01:48 PM
|
#4 |
|
Drives: 2013 1LE Join Date: May 2013
Location: NJ
Posts: 685
|
Thanks for the replies. This is the kit I was thinking of going with. http://www.summitracing.com/parts/hly-534-210
|
|
|
|
|
03-01-2015, 02:52 PM
|
#5 |
|
|
If your thinking of going anywhere close to the 1k mark I would look at the PTFE -6an or the standard -8. I mentioned the benefit of the PTFE above. Good luck.
__________________
|
|
|
|
|
03-01-2015, 03:09 PM
|
#6 |
    
Drives: 2009 ZR1 Join Date: May 2010
Location: KCMO
Posts: 3,205
|
I'm running the stock feed adapted to a -8. That splits into (2) -6 lines for each rail. I have had no fueling issues.
|
|
|
|
|
|
|
|
 |
| Thread Tools | |
|
|
