02-26-2014, 09:50 AM | #1 |
Drives: 2013 Camaro ZL1 Join Date: Aug 2013
Location: Los Angeles
Posts: 25
|
coil springs
Good morning all
I have a question.....I have a 2013 ZL1 with hotchkis coil springs..pretty happy with it expect if the rear can be lower another 1/2 inch, who makes the lowerest coil springs for our cars? thanks for all the input. |
02-26-2014, 08:12 PM | #2 |
Speed Freak
Drives: 2013 ZL1 Camaro, 2016 Camaro SS Join Date: Jun 2013
Location: Ardmore, OK
Posts: 2,637
|
Seems that everybody that makes suspension parts for ZL1's is going out of business. You can try BMR and LG motorsports.
__________________
2016 SS -AGP twin Borg Warner 7163 EFR's, LT4 mechanical pump, LT4 injectors, Walbro 255 low side, Castrol SRF. 734whp/759 tq
2013 ZL1 -ADM - 427 LSX 6 bolt, O-ringed block built by LME. Twin PT6466 turbos. RPM custom manual trans, RPS Quad carbon clutch, 9" Hendrix rear diff & axles. ADM/squash fuel system, Ron Davis radiator, Spal fans, AGP air to air, turbo plumbing. LPE oil cooler, rear bushing upgrade, roll bar...etc. rwhp 1400+... 212.5mph, best Texas mile to date. |
02-26-2014, 08:58 PM | #3 |
I just bought BMR 1.4" lowering springs. Lowest I could find per companies still in business. Also if you go that route. Use "camaro5" at checkout for 20% off.
__________________
2013 Summit White ZL1
|
|
02-27-2014, 01:44 AM | #4 |
Drives: Camaro's, always have, always will. Join Date: Oct 2010
Location: Home of the brave
Posts: 4,851
|
...for advice on suspension or lowering your car, ask Pedders Pete...
__________________
In Scott We Trust...all others must show proof.
|
02-27-2014, 09:28 AM | #5 |
Drives: 2013 Camaro ZL1 Join Date: Aug 2013
Location: Los Angeles
Posts: 25
|
Thanks for the advice.... Just order a set of BMR rear 1.4" ...hopfully this will take care of it.
|
02-27-2014, 09:29 AM | #6 |
Drives: 2010 2SS/RS M6 Join Date: Aug 2013
Location: New Orleans, La
Posts: 436
|
Pedders has closed down. As well as Pfadt.
__________________
2010 2SS/RS
|
|
|
|
|