06-19-2012, 06:15 PM | #1 |
Do I need a new power harness?
So, I'm in the middle of troubleshooting with AAC at the moment to get my HID setup working. previously (and currently until I get the HID kit working), I am using these bulbs also purchased from AAC.
http://www.automotivelightstore.com/H13HOD.aspx Over time, they began to dim and lose functionality. In the midst of installing my HID kit, I noticed that the middle slot (ground) is burned. this would explain the dimming and other issues. I've been told that this will not be an issue for the HIDs because you will be grounding them to the frame. My question is "How expensive would it be to replace these plugs and is it worth it?" |
|
06-19-2012, 06:33 PM | #2 |
oldschool69
Drives: 2012 2SS/RS Join Date: Dec 2011
Location: Indiana
Posts: 150
|
Ah,warranty?
|
06-19-2012, 06:46 PM | #3 |
06-19-2012, 06:49 PM | #4 |
Drives: 2010 camaro 2SS LS3 Join Date: Aug 2011
Location: Denver
Posts: 1,334
|
depends on how the plugs connect to the wires. some need a special clamping tool.
__________________
stage III cam, 4.10's, custom CAI, suede headliner
461 RWHP, 422 RWTQ |
06-20-2012, 07:07 PM | #5 |
oldschool69
Drives: 2012 2SS/RS Join Date: Dec 2011
Location: Indiana
Posts: 150
|
|
06-20-2012, 07:20 PM | #6 |
Drives: Chevrolet Camaro 2011 RS 1LT Join Date: Apr 2012
Location: Chicago, IL
Posts: 340
|
Oh that's easy just buy a replacement bulb and install it. Then explain to them they are dimming and that is the 3rd set you have been through. That should work.
__________________
Camaro 2011 VR 1LT RS - Prometheus Prime
|Leather Interior|Leather Door & Dash Trim|12" Subwoofer|Dash ABL|Plasma DRL| |
|
|
Tags |
aac, plug, power harness |
Thread Tools | |
|
|