04-21-2014, 12:17 AM | #1 |
Drives: 2013 2SS 1LE NPP GBE Join Date: Sep 2012
Location: Bay Area, online, & in my 1LE
Posts: 2,667
|
Lowering Springs
What brands do you guys recommend? Will these affect the 1LE handling in a negative way? 1" to 1.5" lowering?
I'm not going to pony up for coil overs.
__________________
|
04-21-2014, 12:33 AM | #2 |
• HT •
Drives: 2013 2SS/RS 1LE Join Date: Nov 2012
Location: Canada
Posts: 907
|
I went with BMR 1.4" springs. Should be going on this week. It definitely won't make any negative differences. The ride may be more stiff... But who cares? Lol!
__________________
2013 Camaro 2SS/RS/1LE - 402 of 451 "BATMOB1LE" - Xpel Stealth Wrap - ZL1 Rockers - 18% Tint - Custom Badges - Heritage Grille - BMR 1.4" Springs - Solo Performance Axel-Back Exhaust - Recaro Sport Seats |
04-21-2014, 12:45 AM | #3 |
Drives: 2013 2SS/1LE, 2004 Cavalier Join Date: Sep 2012
Location: jax, FL
Posts: 1,344
|
Apex took over Pfadt's springs and have them on their website under the Apex name now, if that appeals to you
|
04-21-2014, 02:22 AM | #4 |
"Cam Only"
|
Get pfadt springs. Under the Apex name like mentioned above.
They're 1.25" all around. http://www.apex-speed.com/apex-motor...g-springs.html
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
04-21-2014, 12:32 PM | #5 |
run ur car not ur mouth
Drives: 2013 1LE Join Date: Jul 2013
Location: Middletown, DE; Mayfield, NY
Posts: 1,220
|
I went with Pfadt and I have zero complaints. The look is perfect.
__________________
TSP headers, cat delete, x-pipe, atak, RPM custom cam and tune, Phfadt 1.25 springs, 15" Carlyle conversion, Nitrous Outlet, Procharger F1A-94, Meth inj
|
04-21-2014, 12:37 PM | #6 |
2013 Camaro SS1LECTSVZ28
Drives: 2013 AGM 1SS/1LE Join Date: Nov 2012
Location: Suburbs of Detroit, MI
Posts: 2,440
|
What are the Apex provided spring rates front and rear?
__________________
|
04-21-2014, 10:57 PM | #7 |
Drives: 2013 2SS 1LE NPP GBE Join Date: Sep 2012
Location: Bay Area, online, & in my 1LE
Posts: 2,667
|
Exactly. It doesn't say on their web site.
__________________
|
04-21-2014, 11:04 PM | #8 |
"Cam Only"
|
Well do we know what the pfadt rates were?
Because they're gonna be the same as that, right?
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
04-21-2014, 11:29 PM | #9 |
Drives: 14 1SS Camaro 1LE, NPP, Recaros Join Date: Nov 2013
Location: NC
Posts: 819
|
|
04-22-2014, 08:52 AM | #10 |
Drives: E92 BMW M3 Join Date: Oct 2012
Location: Houston
Posts: 4,496
|
Do any of you guys know anything about 'Ground Force' lowering springs? I know a 1LE owner installed some recently and his initial reaction and review was very positive. All I know is it was a 1" drop all around. Prior to his post in 1LE facebook group, I hadn't even heard of Ground Force. Apparent they won 2011 SEMA product award.
__________________
SOLD - 2013 1LE - Pat G Spec'd Cam, NPP with 1 7/8" Long Tube Headers with High Flow Cats, Intake w/scoop, Ported Throttle Body, and Apex 1.25" Lowering Springs.
J-Rod Built and Matt@FSP Tuned |
04-22-2014, 09:08 AM | #11 |
Call Me"Doc"
Drives: 2014 2SS/RS 1LE BLACK Join Date: Apr 2009
Location: Ft Riley, Kansas
Posts: 890
|
I've heard BMR 1" springs with good results.
|
04-22-2014, 11:58 AM | #12 |
|
thought the springs that got apex were all 1.4".............
i would go for 1 to 1.25. not more. |
04-22-2014, 07:38 PM | #13 |
Drives: 2013 2SS/RS VR 1LE Join Date: Jan 2013
Location: Prince George, B.C.
Posts: 486
|
I went with the Pedders Sport Ryder Springs 220032/220033 and am very happy with appearance and ride. I even did the 'wife' test, took her for a ride without her knowing what changes had been made. She said it feels like it did before, did you change anything?
I also added the pedders permagrin kit. Yes, it does give you permagrīn. |
04-22-2014, 07:44 PM | #14 | |
Drives: E92 BMW M3 Join Date: Oct 2012
Location: Houston
Posts: 4,496
|
Quote:
__________________
SOLD - 2013 1LE - Pat G Spec'd Cam, NPP with 1 7/8" Long Tube Headers with High Flow Cats, Intake w/scoop, Ported Throttle Body, and Apex 1.25" Lowering Springs.
J-Rod Built and Matt@FSP Tuned |
|
|
|
Thread Tools | |
|
|