Cleaning out the shop, bumpers for sale... - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Rideskinz · 12-06-2013, 08:05 PM

I'm doing some winter cleaning in our shop to in order to make some space. I have 3 Aggressor bumpers for sale. Two fiberglass Aggressor V1's and one Aggressor 2 polyurethane. Check them out:

I have one more polyurethane Aggressor 2 bumper available with a portion of the lower lip cut out. Other than that, the bumper looks pretty good.

$400 or best offer

Bumper #1: Aggressor V1 fiberglass
**SOLD**
*see shipping quotes at the bottom of this post

This was the first bumper installed onto our sponsored black Camaro. All bodywork and paint was done at a shop in Huntington Beach, CA. A lot of time and effort went into this one, so you won't have to worry about fitment. This bumper has carbon fiber accents around the ports, the lower grille opening and on the lower splitter lip. The bumper does have a big mark on the top where a grinder got a bit carried away. Also showing some signs of hairline cracks on the top portion as well as white paint overspray on the center section. Perfect for a DIY'er or a bodyshop special. Here it is installed on the car:

Here's how it looks now:

Bumper #2: Aggressor V1 fiberglass
***SOLD***
$275 or best offer + shipping
*see shipping quotes at the bottom of this post

Here is the second bumper installed onto our sponsored matte black wrapped Camaro. All bodywork and paint was done at a shop in Orange County. This bumper is all ready to go, already fitted, trimmed, etc. so the hardest part is done. This bumper also has carbon fiber accents around the ports, the lower grille opening and on the lower splitter lip. Unfortunately the bumper hit a steel construction plate on the freeway and cracked the lower lip in two places. It still has the matte black vinyl wrap on the surface. The surface underneath should be perfect. Lower steel honeycomb grille mesh is included. Upper grille is not included. Here is the bumper installed on the car:

Here is the bumper now:

Bumper #3: Aggressor 2 polyurethane
***SOLD***
*see shipping quotes at the bottom of this post

This bumper was previously worked on by a body shop with some alterations done to the upper grille opening and mounting tabs. Other than that it is still in pretty good condition....

All bumpers are sold as is. PM or email me (tony@rideskinz.com) to make an offer or ask questions about shipping. Need to get these out of the shop ASAP!

Shipping quote examples for fiberglass bumpers (larger box):
Southern California to Portland, Maine: $185
Southern California to Miami, Florida: $192
Southern California to Tulsa, Oklahoma: $159

Shipping quote examples for polyurethane bumper (folded in smaller box):
Southern California to Portland, Maine: $96
Southern California to Miami, Florida: $105
Southern California to Tulsa, Oklahoma: $82

DaFisch · 12-06-2013, 10:23 PM

Prices?

Rideskinz · 12-06-2013, 10:54 PM

Quote:

Originally Posted by DaFisch

Prices?

Cheap...haha. Just updated the prices and shipping quotes

Goran · 12-07-2013, 10:59 PM

I'm getting one right now!

The first one on the picture (the black one if possible) , will bring cash, let me know what time and where.
PM me please.

cownipples · 12-08-2013, 01:55 AM

Where at in so cal are you located?, I'm in san Diego and would like to meet for pickup

Rideskinz · 12-08-2013, 11:42 AM

Quote:

Originally Posted by Goran

I'm getting one right now!

The first one on the picture (the black one if possible) , will bring cash, let me know what time and where.
PM me please.

Just emailed you. Give me a call when you get a chance. Thanks!

Quote:

Originally Posted by cownipples

Where at in so cal are you located?, I'm in san Diego and would like to meet for pickup

I'm in San Juan Capistrano (south Orange County). You can email me tony@rideskinz.com and we'll arrange a pick up

Rideskinz · 12-08-2013, 04:15 PM

Bumper #2 is sold! Still have the fiberglass bumper #1 and the polyurethane bumper #3 available

Rideskinz · 12-08-2013, 06:31 PM

All PM's replied

Goran · 12-09-2013, 12:13 PM

For The Great Deals!
Cant wait to see mine installed

Rideskinz · 12-11-2013, 04:47 PM

Goran's car before the transformation:

Aggressor V1 fiberglass bumper installed and ready for primer and paint

Rideskinz · 12-15-2013, 11:41 AM

Bump!

Rideskinz · 12-18-2013, 10:57 AM

Bump for bumpers

WhiteCamaroRs · 12-19-2013, 08:19 AM

Can you PM me what you still have left and the price for it?

Rideskinz · 12-21-2013, 02:12 PM

Quote:

Originally Posted by WhiteCamaroRs

Can you PM me what you still have left and the price for it?

Check your PM

12-06-2013, 08:05 PM	#1
Rideskinz Drives: SS, ZL1, V6 Join Date: Jan 2012 Location: So Cal Posts: 836	Cleaning out the shop, bumpers for sale... I'm doing some winter cleaning in our shop to in order to make some space. I have 3 Aggressor bumpers for sale. Two fiberglass Aggressor V1's and one Aggressor 2 polyurethane. Check them out: I have one more polyurethane Aggressor 2 bumper available with a portion of the lower lip cut out. Other than that, the bumper looks pretty good. $400 or best offer Bumper #1: Aggressor V1 fiberglass SOLD see shipping quotes at the bottom of this post This was the first bumper installed onto our sponsored black Camaro. All bodywork and paint was done at a shop in Huntington Beach, CA. A lot of time and effort went into this one, so you won't have to worry about fitment. This bumper has carbon fiber accents around the ports, the lower grille opening and on the lower splitter lip. The bumper does have a big mark on the top where a grinder got a bit carried away. Also showing some signs of hairline cracks on the top portion as well as white paint overspray on the center section. Perfect for a DIY'er or a bodyshop special. Here it is installed on the car: Here's how it looks now: Bumper #2: Aggressor V1 fiberglass SOLD* $275 or best offer + shipping see shipping quotes at the bottom of this post Here is the second bumper installed onto our sponsored matte black wrapped Camaro. All bodywork and paint was done at a shop in Orange County. This bumper is all ready to go, already fitted, trimmed, etc. so the hardest part is done. This bumper also has carbon fiber accents around the ports, the lower grille opening and on the lower splitter lip. Unfortunately the bumper hit a steel construction plate on the freeway and cracked the lower lip in two places. It still has the matte black vinyl wrap on the surface. The surface underneath should be perfect. Lower steel honeycomb grille mesh is included. Upper grille is not included. Here is the bumper installed on the car: Here is the bumper now: Bumper #3: Aggressor 2 polyurethane SOLD* see shipping quotes at the bottom of this post This bumper was previously worked on by a body shop with some alterations done to the upper grille opening and mounting tabs. Other than that it is still in pretty good condition.... All bumpers are sold as is. PM or email me (tony@rideskinz.com) to make an offer or ask questions about shipping. Need to get these out of the shop ASAP! Shipping quote examples for fiberglass bumpers (larger box): Southern California to Portland, Maine: $185 Southern California to Miami, Florida: $192 Southern California to Tulsa, Oklahoma: $159 Shipping quote examples for polyurethane bumper (folded in smaller box): Southern California to Portland, Maine: $96 Southern California to Miami, Florida: $105 Southern California to Tulsa, Oklahoma: $82 Last edited by Rideskinz; 01-23-2014 at 05:47 PM.*

12-06-2013, 10:23 PM	#2
DaFisch Master Amateur Mechanic Drives: Victory Red 2011 2SS/RS Join Date: Jan 2013 Location: South Barrington, IL Posts: 1,720	Prices?

12-07-2013, 10:59 PM	#4
Goran SoCal HT5 Drives: 2013 Camaro 2LT/RS Join Date: Jul 2013 Location: Aliso Viejo Posts: 829	I'm getting one right now! The first one on the picture (the black one if possible) , will bring cash, let me know what time and where. PM me please.

12-08-2013, 01:55 AM	#5
cownipples Drives: Silver Ice SS Join Date: Nov 2013 Location: San Diego Posts: 154	Where at in so cal are you located?, I'm in san Diego and would like to meet for pickup

12-08-2013, 04:15 PM	#7
Rideskinz Drives: SS, ZL1, V6 Join Date: Jan 2012 Location: So Cal Posts: 836	Bumper #2 is sold! Still have the fiberglass bumper #1 and the polyurethane bumper #3 available

12-08-2013, 06:31 PM	#8
Rideskinz Drives: SS, ZL1, V6 Join Date: Jan 2012 Location: So Cal Posts: 836	All PM's replied

12-09-2013, 12:13 PM	#9
Goran SoCal HT5 Drives: 2013 Camaro 2LT/RS Join Date: Jul 2013 Location: Aliso Viejo Posts: 829	For The Great Deals! Cant wait to see mine installed

12-11-2013, 04:47 PM	#10
Rideskinz Drives: SS, ZL1, V6 Join Date: Jan 2012 Location: So Cal Posts: 836	Goran's car before the transformation: Aggressor V1 fiberglass bumper installed and ready for primer and paint

12-15-2013, 11:41 AM	#11
Rideskinz Drives: SS, ZL1, V6 Join Date: Jan 2012 Location: So Cal Posts: 836	Bump!

12-18-2013, 10:57 AM	#12
Rideskinz Drives: SS, ZL1, V6 Join Date: Jan 2012 Location: So Cal Posts: 836	Bump for bumpers

12-19-2013, 08:19 AM	#13
WhiteCamaroRs "Public Enemy" Drives: White 2012 2LT/RS Camaro Join Date: Feb 2013 Location: Houston, Texas Posts: 66 View My Garage	Can you PM me what you still have left and the price for it?