New! Camaro Chrome Trim Parts - Light, Rear Bumper, Rear Valance - Low Prices! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

RPI Designs · 05-07-2010, 11:34 AM

The new 2010 Chevrolet Camaro is one of the hottest cars on the road today and we are very excited to announce these new products!

Installation takes only minutes; simply clean the area where the adhesive will bond to the plastic lens. PLEASE AVOID WASHING THE CAR OR GETTING THE AREA WET FOR 24 HOURS. 3M VHB REQUIRES A MINIMUM OF 24 HOURS TO ACQUIRE 50% OF ITS ULTIMATE ADHESION.

ALL PRODUCTS are laser cut here in the United States and simple to install - just clean, peel the 3M adhesive release paper and press into place.

Note: "Ultra-Chrome™" is a custom made material. We purchase a very high quality chrome film from our German supplier to which we laminate .060 black ABS sheet and later 3M VHB adhesive. This triple layer material is designed especially for exterior auto trim and will not corrode, delaminate or discolor. All "Ultra-Chrome™" trim items are supplies with a clear protective film which should be peeled off the piece, preferably a day or so after installalation so as not to chance pulling the trim off of your car. Once complete, stand back and admire you handiwork. After peeling off the protective film you may notice a slight "nickel" or "black chrome" appearance, this is the UV protective layer which will fade when exposed to sun light.

-------------------------

2010 Camaro Light Trim Kit - $49.95 /6pc kit.

Available here: http://rpidesigns.com/shop/item.asp?itemid=1822

--------------------------

2010 Camaro Bowtie Emblem Surround Trim - Rear Emblem Only $19.95

Available here: http://rpidesigns.com/shop/item.asp?itemid=1823

-------------------------

2010 Camaro Side Vent Gill Inserts - $49.95

Available here: http://rpidesigns.com/shop/item.asp?itemid=1824

-------------------------

2010 Camaro Rear Valance Chrome Trim - $39.95

Available here: http://rpidesigns.com/shop/item.asp?itemid=1827

-------------------------

2010 Camaro Trunk Panel Trim Insert - Chrome - $49.95

Available here: http://rpidesigns.com/shop/item.asp?itemid=1828

-------------------------

2010 Camaro Engine Cover Insert - SS available in Red or White - $24.95

Available here: http://rpidesigns.com/shop/item.asp?itemid=1826

RPI Designs · 05-26-2010, 05:56 PM

We've got more in stock and ready to ship, thanks again!!

RPI Designs · 01-25-2011, 03:29 PM

Thank you for the orders!

05-07-2010, 11:34 AM	#1
RPI Designs Drives: 2016 SS 6 Spd Join Date: Jul 2009 Location: Ohio - www.rpidesigns.com Posts: 3,055	New! Camaro Chrome Trim Parts - Light, Rear Bumper, Rear Valance - Low Prices! The new 2010 Chevrolet Camaro is one of the hottest cars on the road today and we are very excited to announce these new products! Installation takes only minutes; simply clean the area where the adhesive will bond to the plastic lens. PLEASE AVOID WASHING THE CAR OR GETTING THE AREA WET FOR 24 HOURS. 3M VHB REQUIRES A MINIMUM OF 24 HOURS TO ACQUIRE 50% OF ITS ULTIMATE ADHESION. ALL PRODUCTS are laser cut here in the United States and simple to install - just clean, peel the 3M adhesive release paper and press into place. Note: "Ultra-Chrome™" is a custom made material. We purchase a very high quality chrome film from our German supplier to which we laminate .060 black ABS sheet and later 3M VHB adhesive. This triple layer material is designed especially for exterior auto trim and will not corrode, delaminate or discolor. All "Ultra-Chrome™" trim items are supplies with a clear protective film which should be peeled off the piece, preferably a day or so after installalation so as not to chance pulling the trim off of your car. Once complete, stand back and admire you handiwork. After peeling off the protective film you may notice a slight "nickel" or "black chrome" appearance, this is the UV protective layer which will fade when exposed to sun light. ------------------------- 2010 Camaro Light Trim Kit - $49.95 /6pc kit. Available here: http://rpidesigns.com/shop/item.asp?itemid=1822 -------------------------- 2010 Camaro Bowtie Emblem Surround Trim - Rear Emblem Only $19.95 Available here: http://rpidesigns.com/shop/item.asp?itemid=1823 ------------------------- 2010 Camaro Side Vent Gill Inserts - $49.95 Available here: http://rpidesigns.com/shop/item.asp?itemid=1824 ------------------------- 2010 Camaro Rear Valance Chrome Trim - $39.95 Available here: http://rpidesigns.com/shop/item.asp?itemid=1827 ------------------------- 2010 Camaro Trunk Panel Trim Insert - Chrome - $49.95 Available here: http://rpidesigns.com/shop/item.asp?itemid=1828 ------------------------- 2010 Camaro Engine Cover Insert - SS available in Red or White - $24.95 Available here: http://rpidesigns.com/shop/item.asp?itemid=1826 Last edited by RPI Designs; 01-14-2015 at 02:23 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camaro Product Manager - interview	Moose	5th Gen Camaro SS LS LT General Discussions	11	04-04-2012 06:10 PM
Im sure this has been asked before.. But forgive my innocence :)	gmag21	Suspension / Brakes / Chassis	23	02-21-2010 10:29 PM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
Official Camaro Convertible CONCEPT Press Release	Tran	Camaro Convertible Forum	12	11-18-2009 07:05 PM
Some Texas Lighting Laws	Mecha	USA - Texas	5	10-20-2009 01:49 PM

05-26-2010, 05:56 PM	#2
RPI Designs Drives: 2016 SS 6 Spd Join Date: Jul 2009 Location: Ohio - www.rpidesigns.com Posts: 3,055	We've got more in stock and ready to ship, thanks again!!

01-25-2011, 03:29 PM	#3
RPI Designs Drives: 2016 SS 6 Spd Join Date: Jul 2009 Location: Ohio - www.rpidesigns.com Posts: 3,055	Thank you for the orders!