El Paso Chapter of Camaro5 - Page 70 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2010IBMSS · 11-05-2010, 05:59 PM

Quote:

Originally Posted by RobertHarriSS

Sold!
I'll buy it from you man. Did you resolve your intake tube prob?

sweet! I am still searching for the intake breather tube...while taking the intake off, stupid thing snapped...

oh well, shit happens when you wanna play.

let me know when you are in town so I can meet you and give you the harness.

jmlozano7 · 11-05-2010, 06:05 PM

Woops didn't realize I hadn't checked back. Yeah I've got this '08 R32 now:

As for my parts, I've got some 'never-been-used' PFADT engine mounts I will sell for $300 ($310 new, I just opened them and with that price I'll help put them on if you want); stock cam and valvetrain; stock springs and sways; stock clutch; all have relatively low miles and I will sell for any reasonable offer. I wish I had the time to have removed all of my aftermarket parts but I did not have the time :-(

I will remain on the forum and keep y'all updated with my status. I'll go on a cruise with y'all in my little car if I'm allowed ha ha! Let me know if anyone wants my parts.

ac223mal · 11-06-2010, 01:04 AM

Dude, you didnt have to sell you car, all you had to do was say something and Id have never pulled you over again!

jose1003 · 11-06-2010, 01:59 PM

jmlozano7 · 11-07-2010, 11:48 AM

Oh yeah I've also got some 1000hp axles from the Driveshaft Shop! The cv joints were showing signs of wear so I sent them in to be repaired under warranty and they are coming back on tuesday. Practically brand new! I would like to ask $1000 for them since they will be in nearly new condition. I bought them for $1600 new. Spread the word!

Gigachip · 11-08-2010, 01:34 PM

Quote:

Originally Posted by jmlozano7

Oh yeah I've also got some 1000hp axles from the Driveshaft Shop! The cv joints were showing signs of wear so I sent them in to be repaired under warranty and they are coming back on tuesday. Practically brand new! I would like to ask $1000 for them since they will be in nearly new condition. I bought them for $1600 new. Spread the word!

you got a nice looking car still, like the blue paint on it

vincewalthers · 11-08-2010, 04:28 PM

Dig it, White Sands Cruise on Nov 20th!!! Here is the link. Folks from ABQ should be coming out as well.

Gigachip · 11-08-2010, 06:52 PM

Quote:

Originally Posted by vincewalthers

Dig it, White Sands Cruise on Nov 20th!!! Here is the link. Folks from ABQ should be coming out as well.

sounds like a plan

Char1ieone · 11-08-2010, 11:36 PM

Quote:

Originally Posted by vincewalthers

Dig it, White Sands Cruise on Nov 20th!!! Here is the link. Folks from ABQ should be coming out as well.

Haha I went ahead and took on the journey on that Saturday that we originally planned to do it and booooyyyy was that an amazing day to go to the sands. I still plan to head on out there with ya cats on the 20th still. We should do a BBQ out there with some of the picnic tables that they got around and park the cars nicley. Could you imagine the amount of people that will just be looking at the Cams

, just watch out for the kiddies though haha.

vincewalthers · 11-10-2010, 03:10 PM

Does anyone need a short throw shifter?? I have a friend in Albuquerque (Ivan@ SouthWestSpeed) That has a ton of LG short throw shifters he is trying to sell cheap!! PM me or him for info!!!! He is here on the forums

jmlozano7 · 11-10-2010, 07:49 PM

Quote:

Originally Posted by Char1ieone

Haha I went ahead and took on the journey on that Saturday that we originally planned to do it and booooyyyy was that an amazing day to go to the sands. I still plan to head on out there with ya cats on the 20th still. We should do a BBQ out there with some of the picnic tables that they got around and park the cars nicley. Could you imagine the amount of people that will just be looking at the Cams

, just watch out for the kiddies though haha.

"Cams" go inside the engine and characterize the valve train. "Camaros" are the legends you speak of!

Char1ieone · 11-12-2010, 03:34 PM

Quote:

Originally Posted by jmlozano7

"Cams" go inside the engine and characterize theu valve train. "Camaros" are the legends you speak of!

Nah, you see we can disassemble our engines, pull our camshafts and take photos of them in the sand!!! ...

Emperor_SS · 11-12-2010, 07:58 PM

Quote:

Originally Posted by Char1ieone

Nah, you see we can disassemble our engines, pull our camshafts and take photos of them in the sand!!! ...

lol ok me and john win then cuz our cams are already out! If your good i think you could get the cam out in 2 maybe 2.5 hrs

jose1003 · 11-13-2010, 06:08 PM

so who going to white sands on da 20th

11-05-2010, 06:05 PM	#968
jmlozano7 NUPOC Candidate Drives: 2010 Camaro SS Join Date: Dec 2009 Location: El Paso, TX Posts: 348 View My Garage	Woops didn't realize I hadn't checked back. Yeah I've got this '08 R32 now: As for my parts, I've got some 'never-been-used' PFADT engine mounts I will sell for $300 ($310 new, I just opened them and with that price I'll help put them on if you want); stock cam and valvetrain; stock springs and sways; stock clutch; all have relatively low miles and I will sell for any reasonable offer. I wish I had the time to have removed all of my aftermarket parts but I did not have the time :-( I will remain on the forum and keep y'all updated with my status. I'll go on a cruise with y'all in my little car if I'm allowed ha ha! Let me know if anyone wants my parts. __________________ No more Charlotte... Currently driving an '08 Honda Accord... Will be driving a ZL1 before you know it!

11-06-2010, 01:59 PM	#970
jose1003 Drives: 2010 Camaro 2SS Cyber Gray Join Date: Jul 2009 Location: El Paso, Texas Posts: 1,132	__________________

11-07-2010, 11:48 AM	#971
jmlozano7 NUPOC Candidate Drives: 2010 Camaro SS Join Date: Dec 2009 Location: El Paso, TX Posts: 348 View My Garage	Oh yeah I've also got some 1000hp axles from the Driveshaft Shop! The cv joints were showing signs of wear so I sent them in to be repaired under warranty and they are coming back on tuesday. Practically brand new! I would like to ask $1000 for them since they will be in nearly new condition. I bought them for $1600 new. Spread the word! __________________ No more Charlotte... Currently driving an '08 Honda Accord... Will be driving a ZL1 before you know it!

11-13-2010, 06:08 PM	#980
jose1003 Drives: 2010 Camaro 2SS Cyber Gray Join Date: Jul 2009 Location: El Paso, Texas Posts: 1,132	so who going to white sands on da 20th __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
South East Camaro5 Chapter Meet	GTAHVIT	USA - Southeast	238	05-25-2010 04:01 PM
What VIN is yours?	UCF w00t	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	346	03-29-2010 05:55 PM
Laws Protecting Consumers for Aftermarket Parts	strauchpete	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	9	01-17-2010 08:31 AM
IMPORTANT Part 1 Warranty Disputes	Zeus	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	11	08-25-2009 11:37 AM
Pre-packaged chap11, sounds like a good plan	Design1stCode2nd	General Automotive + Other Cars Discussion	2	11-26-2008 10:03 PM

11-06-2010, 01:04 AM	#969
ac223mal Drives: car Join Date: Nov 2008 Location: location Posts: 571 View My Garage	Dude, you didnt have to sell you car, all you had to do was say something and Id have never pulled you over again!

11-08-2010, 04:28 PM	#973
vincewalthers Drives: 2010 SS Camaro Aqua Blue Metallic Join Date: Jan 2010 Location: Las Cruces, NM Posts: 480 View My Garage	Dig it, White Sands Cruise on Nov 20th!!! Here is the link. Folks from ABQ should be coming out as well.

11-10-2010, 03:10 PM	#976
vincewalthers Drives: 2010 SS Camaro Aqua Blue Metallic Join Date: Jan 2010 Location: Las Cruces, NM Posts: 480 View My Garage	Does anyone need a short throw shifter?? I have a friend in Albuquerque (Ivan@ SouthWestSpeed) That has a ton of LG short throw shifters he is trying to sell cheap!! PM me or him for info!!!! He is here on the forums