Utah Utes? - Page 388 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Unreal · 09-12-2011, 04:07 PM

Quote:

Originally Posted by SSOOCH

Hmm... I talked to Bruce and some other Members at the Brighton car show and thought they were great. I'm going. Besides it's for a greater good. I'm not going there to be accepted by a new group, I'm going to support the Utah Food Bank.

And that is the correct reason to go. Just saying most people's experience with them hasn't been that good. I'm surprised they would want something other than an all original corvette there. They gave me crap for modding my corvette, and I know they have given other people crap for racing or modding their vettes.

RogueSS · 09-12-2011, 04:09 PM

Quote:

Originally Posted by SSOOCH

Cool Rogue!

Yes....now to find time to clean Shaft lol

Slowkray · 09-12-2011, 07:19 PM

Quote:

Originally Posted by gr8daneh

I was told I have a flaming dick, but I don't date her anymore...

Now that was funny!

Darth V8R · 09-12-2011, 11:37 PM

Quote:

Originally Posted by SSOOCH

Alright SL,UT's! The Utah Food Bank and Bruce Gildy (President of the Corvette Club of Utah) has hit Me up asking for our participation in their first annual Car Show at Sugar House Park. 9/17/2011 from 10am - 4pm. $12.50 to register before the show or $15.00 day of show. Dash Plaques will be given and prizes. All proceeds will go to the Utah Food Bank. Should be good. SSOOCH and the Award Winning SUPRBAD will be there! If you love your car and care to feed poor people you will be there too!!

I'm on the fence. If the weather's good I may stop by to say hey - but would rather be out driving - we don't have many cruising weekends left!

My 5th · 09-13-2011, 11:21 PM

SSOOCH...I think I will make it to the car show. Downloaded the entry form and will call them tomorrow about running the $$$fee by in person so they get it before Saturday. Do I need to wax inside my wheel wells?

SSOOCH · 09-15-2011, 07:05 AM

Quote:

Originally Posted by My 5th

SSOOCH...I think I will make it to the car show. Downloaded the entry form and will call them tomorrow about running the $$$fee by in person so they get it before Saturday. Do I need to wax inside my wheel wells?

Only if you want to look as good as SUPRBAD

Darth V8R · 09-18-2011, 03:32 AM

Since this is the "Utah Utes" thread, I thought folks would appreciate this

lightning · 09-18-2011, 10:26 AM

SSOOCH · 09-19-2011, 11:18 AM

Camaro5Fest III thread started here: http://www.camaro5.com/forums/showth...55#post3772555

victoryred1ss · 09-19-2011, 01:57 PM

Quote:

Originally Posted by Darth V8R

Since this is the "Utah Utes" thread, I thought folks would appreciate this

That game was classic! One of the Utes all time best ass whoppings

jonnyb · 09-20-2011, 12:44 PM

Ok boys and girls I have to beat the drum for JDP here a little.
They installed Pfadt Solid Sub-Bushings, Rear arm package and RUCA Bushing w/bracket.
Now with the exception of one run I fallowed Jordan’s launch advice 2800-3200RPM with 28psi in the stock PZeros and I was heating them for about 5 seconds or so each run.
All this and I was able to set my dial in 3 tenths lower than before in the 1/8 and my overall time kept improving so I could have set it even lower with more practice! Also the ass of the car does not “squat” like it used to on launch. The last time I raced (in June) I had to run with traction control on otherwise I just fried the rear tires. This time I was in Comp mode for the whole race except for the one run we will not talk about lol.

JDP Motorsports · 09-20-2011, 12:56 PM

Quote:

Originally Posted by jonnyb

Ok boys and girls I have to beat the drum for JDP here a little.
They installed Pfadt Solid Sub-Bushings, Rear arm package and RUCA Bushing w/bracket.
Now with the exception of one run I fallowed Jordan’s launch advice 2800-3200RPM with 28psi in the stock PZeros and I was heating them for about 5 seconds or so each run.
All this and I was able to set my dial in 3 tenths lower than before in the 1/8 and my overall time kept improving so I could have set it even lower with more practice! Also the ass of the car does not “squat” like it used to on launch. The last time I raced (in June) I had to run with traction control on otherwise I just fried the rear tires. This time I was in Comp mode for the whole race except for the one run we will not talk about lol.

Nice!! I'm glad the car worked well and you noticed the improvement. The components we installed have been proven time and time again; now you have a great base for more HP!! We appreciate your business and support! Have a great day and I'll talk to you soon!

Kind regards,

Jordan Priestley
888.308.6007

UHP-CAMARO · 09-21-2011, 01:27 PM

Might be landing a new Job this afternoon!

Stay tuned

My Job interview is in Salina later this afternoon.

Unreal · 09-21-2011, 02:47 PM

Quote:

Originally Posted by UHP-CAMARO

Might be landing a new Job this afternoon!

Stay tuned

My Job interview is in Salina later this afternoon.

Good luck. I had 2 calls today about jobs also. Going to be interviewing next week.

09-13-2011, 11:21 PM	#5423
My 5th Drives: 2010 2SS/RS M6 Black on Black Join Date: Jan 2010 Location: Global Citizen Posts: 1,243	SSOOCH...I think I will make it to the car show. Downloaded the entry form and will call them tomorrow about running the $$$fee by in person so they get it before Saturday. Do I need to wax inside my wheel wells? __________________ Meh

09-18-2011, 03:32 AM	#5425
Darth V8R I'm on a horse Drives: Black 2010 2SS/RS Join Date: Feb 2010 Location: Salt Lake City Posts: 508 View My Garage	Since this is the "Utah Utes" thread, I thought folks would appreciate this Attached Images __________________

09-18-2011, 10:26 AM	#5426
lightning Lightning & Thunder Drives: 2010 SIM 1SS Join Date: Jul 2009 Location: Utah Posts: 2,691 View My Garage	__________________ Time is the only thing we really own. Use yours wisely.

09-19-2011, 11:18 AM	#5427
SSOOCH Camaro SL,UTs Drives: 2010 Camaro SS/RS #16429 Join Date: Sep 2006 Location: South Jordan, UT Posts: 7,358 View My Garage	Camaro5Fest III thread started here: http://www.camaro5.com/forums/showth...55#post3772555 __________________

09-20-2011, 12:44 PM	#5429
jonnyb Drives: IBM 2SS/RS Join Date: Dec 2009 Location: Elko, NV Posts: 392	Ok boys and girls I have to beat the drum for JDP here a little. They installed Pfadt Solid Sub-Bushings, Rear arm package and RUCA Bushing w/bracket. Now with the exception of one run I fallowed Jordan’s launch advice 2800-3200RPM with 28psi in the stock PZeros and I was heating them for about 5 seconds or so each run. All this and I was able to set my dial in 3 tenths lower than before in the 1/8 and my overall time kept improving so I could have set it even lower with more practice! Also the ass of the car does not “squat” like it used to on launch. The last time I raced (in June) I had to run with traction control on otherwise I just fried the rear tires. This time I was in Comp mode for the whole race except for the one run we will not talk about lol. __________________ Searching for traction!

09-21-2011, 01:27 PM	#5431
UHP-CAMARO Drives: Traded this for a 2013 ZL1 Join Date: Aug 2008 Location: Utah Posts: 137	Might be landing a new Job this afternoon! Stay tuned My Job interview is in Salina later this afternoon. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Order tracking for Utah	SSOOCH	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	11	05-06-2009 03:32 PM
Utah Auto show - silver ss with inferno orange interior	kalel	5th Gen Camaro SS LS LT General Discussions	2	01-17-2009 11:18 AM
Utah role call!	SSOOCH	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	3	10-15-2008 09:25 PM
Dealer news in Utah	SSOOCH	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	23	03-27-2008 09:53 PM
GM bringing tricked-out trucks, utes, roadsters and more to SEMA show	KILLER74Z28	General Automotive + Other Cars Discussion	14	11-06-2006 05:44 PM