08-07-2012, 02:07 PM | #1 |
Stock Pirelli on Bigger wider rims
Is this correct, the stock 8" wide tire can fit on an 8.5" wide rim??
__________________
2011 Camaro 2SS/RS, Borla ATAK Catback Exhaust, CAI Inc. Intake, Roto Fab W/W Relocation, ADM Race Scoop Louisville Kentucky |
|
08-07-2012, 02:26 PM | #2 |
|
According to Tirerack.com, the recommended wheel width for the factory 20" tires is:
245/45ZR20 = 7.5 - 9.0 inch 275/40ZR20 = 9.0 - 11.0 inch Personally, I don't think I would stretch that 275/40 on a 11" wheel, but I've seen plenty of people put them on a 10" wheel just fine. You will be fine with the stock 245/45 on a 8.5 inch rim. |
08-08-2012, 10:03 PM | #3 |
|
I have the 245s on 9" rim & 275's on 10.5" rim with no problems.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
__________________
CAI intake | OBX LT Headers | Flowmaster AT Exhaust | Trifecta Tune | SS Rear Diff, Axles & Driveshaft Zex 100 Shot Nitrous | Konig Airstrike Wheels | Custom Engine Cover, Fuse Box & Underhood Bowtie Eibach Springs & SS Sway Bars | BMR Strut Brace | Drake Shifter | Vitesse Paddles | 13.26 @ 105.88 mph |
08-09-2012, 06:49 AM | #4 |
Drives: 2017 Mosaic Bk ZL1 M6 Join Date: Jul 2009
Location: South of Raleigh, NC
Posts: 9,474
|
I have 245s on 8.5s and 275s on 10s. The Pirellis on the front were fine, but the rears looked stretched a little. I now have Invos all the way around and the rears fit much better. Probably something to do with the stiffer sidewall on the Pirellis as well as the tire design.
__________________
|
|
|
|
|