07-08-2013, 03:00 PM | #1 |
movin' down the motorway
Drives: Summiit White 2SS/RS/M6 Join Date: Feb 2010
Location: Palmetto Fl and Peabody MA
Posts: 740
|
Fastlane fitment question...
Will a Fastlane CAI for a 2010 V8 fit a 2013 V6 (both Camaros of course)
Thanks in advance Mike
__________________
417 stroker - Florida Speed and Power
|
07-08-2013, 03:13 PM | #2 |
Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009
Location: Rio Rancho, NM
Posts: 12,170
|
No. The intake tubing is a little different in size. If you neck down you could "make" it fit.
Not the most desirable thing to do, but I've seen it. Good luck! Ivan @ Southwest Speed |
07-08-2013, 03:15 PM | #3 |
Search Ninja
Drives: 2010 Black 2SS/RS A6 Join Date: Oct 2009
Location: Central Ark
Posts: 7,183
|
Are the MAF's different sizes? I'm thinking of them being able to bolt up in the FL.
__________________
2010 Black 2SS/RS A6
Halltech CF 102 fed GPI modded intake manifold Bo (knows) White ported TB Kooks LT's/ Dynomax VT Pfadted (springs/sways) Dyno tuned by Rhino and GPI I once parallel parked a train. |
|
|
|
|